Indledning
This manual provides essential instructions for the safe and efficient operation of your GADPRO AIR 3 Portable Bluetooth Wireless Speaker. Please read this manual thoroughly before using the device and retain it for future reference.
Sikkerhedsoplysninger
- Udsæt ikke højttaleren for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
- Undgå at tabe eller udsætte højttaleren for kraftige stød.
- Forsøg ikke at skille højttaleren ad eller ændre den. Dette vil ugyldiggøre garantien.
- Keep the speaker away from water and liquids. While it features splash protection, it is not fully waterproof.
- Brug kun det specificerede opladningskabel og strømadapter.
Pakkens indhold
The GADPRO AIR 3 speaker package typically includes:
- GADPRO AIR 3 Bluetooth Wireless Speaker
- USB-opladerkabel (Type-C)
- Brugervejledning (dette dokument)
Note: Specific contents may vary. Please check the product packaging for exact details.
Produkt overview
Gør dig bekendt med højttalerens komponenter og betjeningselementer.
Billedbeskrivelse: This image displays the top and side view of the GADPRO AIR 3 speaker, highlighting its control panel. The top panel shows buttons labeled 'play/pause', 'Type C' (charging port), 'USB' (port), 'Input card' (slot), and 'off/on' (power switch). The side view points to 'Volume Up', 'Volume Down', and 'Mode' buttons. A colorful carry handle is visible on the side.
Opsætning
1. Opladning af højttaleren
- Locate the Type-C charging port on the speaker (refer to Product Overview).
- Connect the provided USB Type-C cable to the speaker's charging port.
- Tilslut den anden ende af USB-kablet til en kompatibel USB-strømadapter (medfølger ikke) eller en computers USB-port.
- The charging indicator light will illuminate. Charging time is approximately 3 hours.
- Once fully charged, the indicator light may change or turn off. Disconnect the speaker from the power source.
Billedbeskrivelse: This image displays the GADPRO AIR 3 speaker from the front, with key specifications overlaid. The text indicates "Charging time - 3H", "Working time - 2-4H", "Bluetooth version - 5.0", and "Battery capacity - 800mAh". The speaker itself is black with a mesh grille and a small logo.
2. Tænd/sluk
- To power on, slide the 'off/on' switch to the 'on' position. You will hear an audible prompt.
- To power off, slide the 'off/on' switch to the 'off' position.
Drift
1. Bluetooth-parring
- Ensure the speaker is powered on and in Bluetooth mode (it usually defaults to this mode upon power-on). A blue indicator light will flash, indicating it's ready for pairing.
- Aktiver Bluetooth på din enhed (smartphone, tablet osv.) og søg efter tilgængelige enheder.
- Select "GADPRO AIR 3" from the list of found devices.
- Once paired, the speaker will emit an audible confirmation, and the blue indicator light will stop flashing and remain solid.
- The speaker will automatically connect to the last paired device when powered on, if that device's Bluetooth is active and within range.
2. Afspilning af lyd
- After successful Bluetooth pairing, start playing audio from your connected device.
- Press the 'play/pause' button on the speaker to pause or resume playback.
3. Lydstyrkekontrol
- Press the 'Volume Up' button to increase the volume.
- Press the 'Volume Down' button to decrease the volume.
- You can also adjust the volume directly from your connected device.
4. Valg af tilstand
The speaker supports multiple input modes. Press the 'Mode' button to cycle through available modes:
- Bluetooth-tilstand: Til trådløs lydstreaming.
- USB/Input Card Mode: Insert a USB drive or a compatible memory card into the respective port/slot to play audio files direkte.
Opretholdelse
- Rensning: Use a soft, dry cloth to wipe the speaker's surface. Do not use abrasive cleaners, alcohol, or chemical solvents.
- Opbevaring: Når højttaleren ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
- Batteripleje: For at forlænge batteriets levetid bør du undgå at aflade batteriet helt ofte. Oplad højttaleren regelmæssigt, selvom den ikke er i brug.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Højttaleren tænder ikke. | Batteriet er afladet. | Oplad højttaleren i mindst 3 timer. |
| Kan ikke parres via Bluetooth. | Bluetooth is not enabled on your device or speaker. Speaker is too far from the device. Speaker is already connected to another device. | Ensure Bluetooth is active on both devices. Move the speaker closer to your device. Disconnect from other devices or restart the speaker. |
| Ingen lyd. | Volume is too low. Speaker is not connected. Incorrect mode selected. | Increase volume on both speaker and connected device. Re-pair Bluetooth. Press the 'Mode' button to select the correct input. |
| Dårlig lydkvalitet. | Device is too far from the speaker. Obstructions between devices. Low battery. | Move devices closer. Remove obstructions. Charge the speaker. |
Specifikationer
Billedbeskrivelse: This image shows the GADPRO AIR 3 portable Bluetooth speaker from a slightly elevated angle, centered on a circular grey platform against a blue gradient background. The speaker is black, cylindrical with a slightly tapered top, and features a colorful braided carry handle.
| Feature | Detalje |
|---|---|
| Modelnavn | LUFT 3 |
| Højttaler type | Bærbar højttaler |
| Forbindelsesteknologi | Bluetooth (version 5.0) |
| Højttaler Maksimal udgangseffekt | 5 watt |
| Batterikapacitet | 800 mAh |
| Opladningstid | Cirka 3 timer |
| Working Time (Playback) | 2-4 timer |
| Produktdimensioner | 10D x 5B x 15H Centimeter |
| Varens vægt | 280 gram |
| Sprøjtsikker | Yes (shields from light splashes) |
| Kompatible enheder | Smartphone, Tablet, Laptop, Gaming Console, Desktop |
| Lydudgangstilstand | Stereoanlæg |
Garanti og support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer. Keep your proof of purchase for warranty claims.
Manufacturer: GUANGZHOU FURISI ELECTRONIC TECHNOLOGY CO LIMITED
