BoxWave Wall Charger Direct (15W) Instruction Manual

Indledning

This manual provides essential information for the safe and efficient use of your BoxWave Wall Charger Direct (15W). This USB Type-C specific power adapter is designed to provide rapid charging for compatible devices, such as the Marbero Power Station M60, with its built-in 6-foot cable.

Opsætning

Follow these steps to set up your BoxWave Wall Charger Direct:

1. Pak opladeren ud: Carefully remove the Wall Charger Direct from its packaging. Inspect the charger and cable for any visible damage.
2. Identify the USB Type-C Connector: The charger features a built-in USB Type-C cable. Ensure your device has a compatible USB Type-C charging port.
3. Tilslut til stikkontakten: Plug the AC prongs of the Wall Charger Direct into a standard wall power outlet (100-240V, 50/60Hz).
4. Opret forbindelse til enhed: Insert the USB Type-C connector firmly into the charging port of your Marbero Power Station M60 or other compatible device.

Image: The BoxWave Wall Charger Direct (left) with its built-in USB-C cable, shown alongside a Marbero Power Station M60 (right), illustrating the intended use.

Betjeningsvejledning

The BoxWave Wall Charger Direct is designed for simple and efficient operation:

• Automatisk opladning: Once connected to a power outlet and your device, the charger will automatically begin delivering 15W of power to your device.
• Hurtig opladningskapacitet: This charger is engineered for rapid charging, allowing your device to charge quickly and efficiently.
• Built-in 6ft Cable: The integrated 6-foot cable provides ample length for flexible placement of your device while charging, reducing the need for extension cords.

Image: A smartphone connected to the BoxWave Wall Charger Direct, illustrating the 15W fast charging capability.

Image: The BoxWave Wall Charger Direct plugged into a wall, demonstrating the extended reach of its 6-foot built-in cable for flexible device placement.

Opretholdelse

Korrekt vedligeholdelse sikrer din opladeres levetid og optimale ydeevne:

• Rensning: Tag opladeren ud af stikkontakten og din enhed, inden du rengør den. Brug en blød, tør klud til at tørre overfladen af. Brug ikke flydende rengøringsmidler eller aerosoler.
• Opbevaring: Når opladeren ikke er i brug, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer. Undgå at vikle kablet stramt sammen.
• Kabelpleje: The charger features reinforced strain relief at the connector to prevent kinking and tearing. Avoid sharp bends or excessive pulling on the cable.
• Inspektion: Periodically inspect the charger and cable for any signs of wear, cuts, or damage. If damage is observed, discontinue use immediately.

Billede: En detaljeret view of the USB-C connector, showcasing the reinforced strain relief designed to prevent cable damage.

Fejlfinding

If you encounter issues with your BoxWave Wall Charger Direct, refer to the following common solutions:

Specifikationer

• Model: Wall Charger Direct (15W)
• Input: 100-240V ~ 50/60Hz, 0.55A Maks
• Produktion: 5V === 3000mA (15W)
• Connector Type: USB Type-C (built-in cable)
• Kabellængde: 6 fod (ca. 1.8 meter)
• Materiale: Polycarbonat
• Varens vægt: 3.3 ounce (ca. 93.5 gram)
• Fabrikant: BoxWave
• Oprindelsesland: Kina

Garanti og support

For information regarding warranty coverage or technical support, please refer to the documentation included with your purchase or visit the official BoxWave website. Limited third-party technical support for your device (up to 3 inquiries via messaging) may be available, as noted in the product description. Please note that BoxWave is not affiliated with or endorsed by Marbero.