Produkt overview
The Bewinner LED Digital Alarm Clock (Model Bewinner0sfx29r7wg-14) is designed for convenience and functionality, featuring a clear LED display, adjustable brightness, dual alarms, and a 12/24-hour time format. This manual provides detailed instructions for setup, operation, and maintenance.
Figur 1: Overview of the Bewinner LED Digital Alarm Clock's key features.
Pakkens indhold
- 1 x LED Alarm Clock
- 1 x Power Cord (USB cable)
- 1 x brugsanvisning
Figure 2: The alarm clock and its USB power cable.
Opsætning
Tænd for enheden
The Bewinner LED Digital Alarm Clock is primarily outlet powered. A USB cable is included for power. An AC adapter is not included and must be supplied separately (5V 1A recommended).
- Connect the provided USB power cord to the DC 5V input port on the back of the alarm clock.
- Sæt den anden ende af USB-kablet i en kompatibel USB-strømadapter (medfølger ikke) eller en USB-port med strøm.
- The clock will power on and display the time.
Battery Backup (Not for Primary Power)
The clock supports 3 x AAA batteries (not included) for memory backup. These batteries will retain time and alarm settings during a power outage but will not power the main display continuously. The display will only light up for 8 seconds when a button is pressed in battery mode.
- Åbn batterirummet på bagsiden af uret.
- Indsæt 3 AAA-batterier, og sørg for korrekt polaritet.
- Luk batterirummet.
Figure 3: Power input and battery compartment.
Betjeningsvejledning
Kontrol overview
The clock features several buttons on the top and back for setting time, alarms, and brightness. Refer to the diagram below for button identification.
Figure 4: Control buttons on the alarm clock.
Indstilling af tid
- Tryk og hold på TIDSINDSTILLING button on the back of the clock. The hour display will start flashing.
- Brug UP og NED knapper for at justere timen.
- Trykke TIDSINDSTILLING igen for at gå til minutjustering. Brug UP og NED for at indstille minutterne.
- Trykke TIDSINDSTILLING en tredje gang for at bekræfte og afslutte tidsindstillingstilstanden.
12/24 timers format
To switch between 12-hour and 24-hour time display, press the UP button during normal time display. The display will show "AM" or "PM" in 12-hour mode.
Figur 5: Skift mellem 12-timers og 24-timers tidsvisning.
Setting Alarms (Dual Alarm Function)
The clock supports two independent alarms. You can set different alarm days.
- Tryk og hold på ALARM SÆT button. The alarm hour will flash.
- Bruge UP og NED for at indstille den ønskede alarmtime.
- Trykke ALARM SÆT again to set the alarm minutes. Use UP og NED.
- Trykke ALARM SÆT a third time to select alarm days (e.g., Mon-Sun, Mon-Sat, Mon-Fri, Single Day, Weekend). Use UP og NED for at gennemgå mulighederne.
- Trykke ALARM SÆT for at bekræfte og afslutte.
- To set the second alarm, repeat the process.
Aktivering/deaktivering af alarmer
To turn an alarm on or off, press the corresponding alarm toggle switch on the back of the clock.
Figure 6: Dual alarm settings and day options.
Snooze funktion
Når en alarm lyder, skal du trykke på SLUM button (located on top) to activate a 5-minute snooze. The alarm will sound again after 5 minutes. To turn off the alarm completely, press any other button.
Justering af lysstyrke
The clock has 3 adjustable brightness levels (Low, Medium, Bright) and an option to turn off the display. Press the LYS button (located on top) to cycle through the brightness settings.
Figure 7: Three levels of brightness adjustment.
Figure 8: Four levels of brightness adjustment including screen off.
Opretholdelse
- Rengør urets overflade med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Undgå at udsætte uret for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
- If using battery backup, replace AAA batteries annually or when the clock's memory function becomes unreliable.
- Ensure the USB power cable is not bent or damaged to maintain a stable power connection.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Urvisningen er slukket. | No power or display brightness set to off. | Ensure USB power cable is securely connected to a working power source. Press the LYS knappen for at justere lysstyrken. |
| Alarmen lyder ikke. | Alarmen er ikke aktiveret eller indstillet forkert. | Check if the alarm toggle switch is ON. Verify alarm time and day settings. |
| Tid/indstillinger nulstilles efter strømafbrydelsetage. | Ingen backupbatterier, eller batterierne er afladede. | Install 3 new AAA batteries for memory backup. |
| Skærmen er for svag/lys. | Lysstyrkeniveauet skal justeres. | Tryk på LYS knappen for at skifte mellem lysstyrkeniveauerne. |
| Incorrect time format (12H/24H). | Time format needs to be changed. | Tryk på UP button during normal time display to switch formats. |
Specifikationer
- Model: Bewinner0sfx29r7wg-14
- Materiale: ABS
- Skærmtype: LED
- Bevægelsestype: Elektronisk
- Tidsformat: 12/24 Hours selectable
- Lysstyrkeniveauer: 3 levels (Low, Medium, Bright) + Off
- Alarm funktion: Dual Alarms with selectable alarm days
- Snooze tid: 5 minutter
- Strømforsyning: 5V 1A (USB cable included, AC adapter not included)
- Battery Type (Backup): 3 x AAA-batterier (medfølger ikke)
- Dimensioner: Ca. 6.4 cm (2.5 tommer) x 3.5 cm (1.4 tommer) x 10 cm (3.9 tommer)
- Varens vægt: 6.6 ounces (ca. 187 g)
Figur 9: Produktdimensioner.
Garanti og support
Specific warranty information is not provided in the product details. For support or warranty inquiries, please refer to the seller's return policy or contact the manufacturer, Bewinner, directly through their official channels or the platform where the product was purchased.
The product is eligible for a 30-day refund/replacement return policy.