Shad 3P System Yamaha MT09 Side Case Mounting Kit Instruction Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of the Shad 3P System side case mounting kit for the Yamaha MT09 motorcycle. The 3P System is designed to integrate seamlessly with your motorcycle, offering a lightweight and secure solution for attaching Shad side cases. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

2. Sikkerhedsoplysninger

Always prioritize safety during installation and use. Failure to follow these instructions may result in injury or damage to the product or motorcycle.

• Ensure the motorcycle is stable and turned off before beginning any installation.
• Brug passende personlige værnemidler, såsom handsker og øjenbeskyttelse.
• Do not exceed the maximum load capacity specified for your side cases or motorcycle.
• Regularly check all mounting bolts and fasteners for tightness, especially after the first few rides and before long journeys.
• Be aware that adding side cases can affect the motorcycle's handling, especially at high speeds or in windy conditions. Adjust your riding style accordingly.
• This product is not compatible with Shad TR36 and TR47 side cases. Ensure you are using compatible Shad side cases.

3. Pakkens indhold

Verify that all components are present before starting the installation. If any parts are missing or damaged, contact your dealer or Shad support.

• Left 3P System side carrier frame
• Right 3P System side carrier frame
• Mounting hardware kit (bolts, washers, spacers, etc.)
• Installationsvejledning (denne manual)

4. Opsætning og installation

The Shad 3P System is designed for straightforward installation. Follow these steps carefully.

4.1 Nødvendigt værktøj

• Metrisk unbraconøglesæt
• Metrisk nøglesæt
• Momentnøgle (anbefales)
• Thread-locking compound (e.g., Loctite, recommended for critical fasteners)

4.2 Installationstrin

1. Forbered motorcyklen: Park the Yamaha MT09 on a level surface using its center stand or a paddock stand for stability. Ensure the engine is off and cool.
2. Identificér monteringspunkter: Locate the designated mounting points on the motorcycle's subframe and passenger footpeg brackets. Refer to the specific diagrams provided with your kit for exact locations.
3. Attach Rear Brackets: Secure the rear mounting brackets of the 3P System to the motorcycle's subframe using the provided bolts and spacers. Do not fully tighten at this stage.
4. Attach Front Brackets: Connect the front mounting brackets to the passenger footpeg mounts. You may need to remove existing bolts and replace them with the longer ones supplied in the kit. Again, do not fully tighten.
5. Mount Side Carrier Frames: Carefully position the left and right 3P System side carrier frames onto the attached brackets. Align all mounting holes.
6. Secure Frames: Insert all remaining bolts and fasteners to secure the side carrier frames to the brackets.
7. Justér og stram: Once all bolts are in place, ensure the entire system is properly aligned and level. Begin to progressively tighten all bolts, starting from the main attachment points and working outwards. Use a torque wrench to tighten all fasteners to the motorcycle manufacturer's specifications or the torque values provided by Shad, if available. Apply thread-locking compound to critical fasteners as recommended.
8. Endelig kontrol: Double-check all bolts for tightness. Gently shake the installed system to ensure it is rigid and secure.

Figur 1: Side view of the Yamaha MT09 with the Shad 3P System installed, showcasing dens integrerede design.

Figur 2: Bagside view of the Yamaha MT09 with the Shad 3P System and compatible side cases, illustrating the overall width of the setup.

5. Betjeningsvejledning

Once the 3P System is installed, you can easily attach and detach compatible Shad side cases.

5.1 Attaching Side Cases

1. Align the three mounting points on the back of the Shad side case with the corresponding pins on the 3P System carrier.
2. Gently push the side case onto the carrier until it clicks securely into place.
3. Ensure the case is firmly attached by attempting to pull it away from the carrier without pressing the release mechanism.
4. Lock the side case using its key to prevent accidental detachment and theft.

5.2 Detaching Side Cases

1. Unlock the side case using its key.
2. Locate the release lever or button, typically found near the top or inside the case.
3. Press the release mechanism while simultaneously lifting the side case upwards and away from the 3P System carrier.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer levetiden og sikker drift af dit Shad 3P-system.

• Rensning: Clean the carrier system with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
• Inspektion: Periodically inspect the entire system for any signs of wear, damage, or corrosion. Check for loose bolts, cracks, or deformation.
• Fastgørelseskontrol: Re-check the tightness of all mounting bolts at regular intervals, especially after the first 500 km (300 miles) and before long trips.
• Smøring: If any moving parts or locking mechanisms on your side cases feel stiff, apply a small amount of silicone-based lubricant.

7. Fejlfinding

If you encounter issues with your Shad 3P System, refer to the following common problems and solutions.

If the problem persists, contact Shad customer support for assistance.

8. Specifikationer

9. Garanti og support

Shad products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official Shad webwebstedet eller kontakt din autoriserede forhandler.

For technical support, spare parts, or further assistance, please visit the official Shad website or contact their customer service department. When contacting support, please have your product model number (Y0MT94IF) and purchase information ready.