Artec Wing Bubble Gun (Yellow) - Model 21852 Instruction Manual

Indledning

Tak for købetasing the Artec Wing Bubble Gun, Model 21852. This electric bubble gun is designed to create numerous bubbles for enjoyable outdoor play. Featuring a unique winged design and a vibrant yellow color, it is suitable for various recreational settings. This manual provides essential information for the safe and proper use of your bubble gun.

Sikkerhedsoplysninger

• Dette produkt er ikke vandtæt. To prevent damage and ensure safe operation, do not immerse the main unit in water or expose it to heavy rain.
• Requires three (3) AAA batteries (sold separately). Ensure batteries are inserted with correct polarity.
• Hold bobleopløsningen væk fra øjne og mund. Skyl grundigt med vand i tilfælde af kontakt.
• Recommended for ages 36 months and up. Adult supervision is advised for younger children.
• Do not aim the bubble gun directly at people or animals, especially at close range.
• Store the product and bubble solution in a cool, dry place, out of reach of small children.

Pakkens indhold

Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:

• Wing Bubble Gun Main Unit (Yellow) x 1
• Bubble Solution Bottle x 1

Image: The Artec Wing Bubble Gun in yellow, shown alongside a bottle of bubble solution. The gun is actively blowing numerous bubbles, demonstrating its function.

Opsætning

1. Batteri installation: Locate the battery compartment on the handle of the bubble gun. Open the compartment cover. Insert three (3) AAA batteries, ensuring the correct positive (+) and negative (-) polarity. Close the battery compartment cover securely.
2. Load Bubble Solution: Pour the included bubble solution into the designated tray or reservoir at the front of the bubble gun. Ensure the solution level is sufficient to cover the bubble-blowing nozzles.

Betjeningsvejledning

1. Ensure batteries are installed and bubble solution is loaded as per the Setup section.
2. Hold the bubble gun by the handle.
3. Press and hold the trigger. The internal fan will activate, and the bubble nozzles will begin to produce a continuous stream of bubbles.
4. Slip aftrækkeren for at stoppe bobleproduktionen.
5. For best results, hold the gun steady and avoid tilting it excessively to prevent solution spillage.

Opretholdelse

• Rensning: After each use, especially if using different bubble solutions, empty any remaining solution from the tray. Wipe the exterior of the bubble gun with a dry or slightly damp klæde. Do not rinse the gun under water or submerge it.
• Opbevaring: When not in use, remove the batteries to prevent leakage and corrosion. Store the bubble gun in a clean, dry place away from direct sunlight and extreme temperatures.
• Bobleløsning: If the included bubble solution runs out, use high-quality, non-toxic bubble solution specifically designed for bubble machines to ensure optimal performance.

Fejlfinding

Specifikationer

Image: A visual representation of the Artec Wing Bubble Gun with its key dimensions labeled: 17.5 cm in length and 14.5 cm in height.

Garanti og support

Artec, established in 1960, is a reputable manufacturer known for educational and school materials. While specific warranty details are typically provided at the point of purchase or within the product packaging, Artec is committed to delivering high-quality products. For any inquiries or support regarding your Artec Wing Bubble Gun, please refer to the contact information provided with your purchase or visit the official Artec website for customer service resources.

Dette produkt er fremstillet i Kina.