Redroad R11 Robot Vacuum and Mop Cleaner User Manual

1. Introduktion

Thank you for choosing the Redroad R11 Robot Vacuum and Mop Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before use and retain it for future reference.

Figure 1: Redroad R11 Robot Vacuum and Mop Cleaner with its self-emptying station and mobile application.

2. Vigtige sikkerhedsinstruktioner

To reduce the risk of injury or damage, read these safety instructions carefully when setting up, using, and maintaining your robot.

• Dette apparat kan bruges af børn i alderen 8 år og derover og personer med nedsatte fysiske, sensoriske eller mentale evner eller mangel på erfaring og viden, hvis de har fået opsyn eller instruktion i brugen af ​​apparatet på en sikker måde og forstår de involverede farer. .
• Børn skal være under opsyn for at sikre, at de ikke leger med apparatet.
• Rengøring og brugervedligeholdelse må ikke udføres af børn uden opsyn.
• Brug kun den strømadapter, der er leveret af producenten.
• Brug ikke robotten i omgivelser med åben ild eller skrøbelige genstande.
• Sørg for, at opladningsdokken er placeret på en plan overflade op mod en væg med tilstrækkelig plads omkring den.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og i god stand ved udpakning.

Figure 2: Included components of the Redroad R11 package.

• Hovedrobotenhed
• Selvtømmende station
• 2-i-1 skraldespand og vandtank
• Moppeklude (2)
• High-Efficiency Filters (2)
• Anti-Tangle Side Brushes (2)
• Dust Bags (2)
• Rengøringsbørste
• Brugervejledning (dette dokument)

4. Opsætning

4.1 Placering af ladestation

Place the self-emptying station on a hard, level surface against a wall. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the station for optimal robot navigation and return.

4.2 Indledende opladning

Before first use, fully charge the robot. Place the robot onto the charging pins of the self-emptying station. The indicator lights will show charging status. A full charge typically takes approximately 4-5 hours.

4.3 Appinstallation og Wi-Fi-forbindelse

Download the Redroad app from your mobile device's app store. Follow the in-app instructions to connect your robot to your home Wi-Fi network. The R11 supports both 2.4GHz and 5GHz Wi-Fi bands.

Figure 3: Connecting the Redroad R11 to the mobile application and enabling voice control.

5. Betjeningsvejledning

5.1 Rengøringstilstande

The Redroad R11 offers versatile cleaning options:

• Kun støvsuger: For dry debris and carpet cleaning. Ensure the mop module is removed for optimal carpet vacuuming.
• Kun moppe: For hard floors. The robot precisely controls water flow to prevent leaks or over-wetting.
• Støvsuger og mopper: Samtidig rengøring af hårde gulve.

Figure 4: The Redroad R11 supports Vacuum Only, Mop Only, and combined Vacuum & Mop modes.

5.2 Start af en rengøringscyklus

You can start a cleaning cycle using the physical button on the robot, the mobile app, or voice commands (if integrated with Alexa/Google Home).

5.3 Smart navigation og kortlægning

The R11 uses 360° Smart LiDAR Navigation to create an efficient cleaning route and map your home. This allows for multi-level mapping and precise room recognition.

Figure 5: The R11's 360° Smart LiDAR Navigation for efficient cleaning and multi-floor mapping.

5.4 Customizing Cleaning Settings

Through the Redroad app, you can:

• Set cleaning schedules for specific times.
• Adjust suction levels (4 levels available) and water flow levels (3 levels available) for different rooms or floor types.
• Define No-Go Zones and Virtual Walls to restrict the robot from certain areas.
• Vælg specifikke rum eller zoner til rengøring.

Figure 6: Customizing cleaning solutions and schedules via the Redroad mobile application.

Figure 7: Setting up No-Go Zones and Virtual Walls for precise cleaning management.

5.5 Automatiske funktioner

• Auto-Boost Suction: Ultrasonic sensors automatically detect carpets and increase suction power to 15,000Pa for deep cleaning.
• Selvtømning: The robot automatically empties its dustbin into the 3.8L dust bag in the self-emptying station, providing up to 90 days of hands-free dust collection.
• Genopladning og genoptag: If the battery runs low during a cleaning cycle, the robot will return to the charging station, recharge, and then resume cleaning from where it left off.

Figure 8: Smart Auto-Boost Suction feature for enhanced carpet cleaning.

Figure 9: The 90-day automatic dust collection system with a 4L dust bag.

6. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your Redroad R11.

6.1 Udskiftning af støvpose

The 3.8L dust bag in the self-emptying station should be replaced approximately every 90 days, or when the app indicates it is full. Open the station's lid, remove the full bag, and insert a new one.

6.2 Rengøring af affaldsbeholder og vandtank

The 2-in-1 dustbin and water tank should be emptied and rinsed after each mopping session or as needed. Remove the module from the robot, separate the components, empty debris, and rinse with water. Allow to air dry completely before reinserting.

6.3 Rengøring af sidebørster

The extended anti-tangle side brushes should be checked and cleaned regularly to remove tangled hair and debris. The design minimizes hair entanglement, but periodic inspection is recommended.

Figure 10: The extra-long mechanical arm design of the side brush for enhanced edge coverage.

Figure 11: The upgraded external expansion untangling edge brush system.

6.4 Rengøring af hovedbørste

Remove the main brush cover and lift out the main brush. Use the provided cleaning tool to cut and remove any tangled hair or fibers. Reinstall the brush and cover securely.

6.5 Rengøring/udskiftning af filter

The HEPA filter located in the dustbin should be tapped clean periodically to remove dust. Replace the filter every 3-6 months, or as needed, to maintain optimal suction performance.

6.6 Sensorrensning

Wipe all sensors (Lidar, cliff sensors, wall sensors) with a clean, dry cloth to ensure accurate navigation and obstacle detection.

7. Fejlfinding

If you encounter issues with your Redroad R11, refer to the following common problems and solutions:

8. Specifikationer

9. Garanti og support

9.1 Garantioplysninger

The Redroad R11 Robot Vacuum and Mop Cleaner comes with a 2-års garanti. This warranty covers manufacturing defects and operational malfunctions under normal use conditions.

9.2 Kundesupport

For any operational issues, malfunctions, or warranty claims, please contact Redroad's official after-sales support team. We are committed to providing effective solutions within 24 hours.

Please refer to the product packaging or the Redroad official webwebstedet for specifikke kontaktoplysninger.