CYCLAMI RT02 Bike Radar Tail Light User Manual

Indledning

The CYCLAMI RT02 Bike Radar Tail Light is designed to enhance cycling safety by providing real-time detection of approaching vehicles from behind. Featuring 24GHz millimeter-wave radar technology, active alerts, brake sensing, and multiple lighting modes, this device offers comprehensive protection for various cycling conditions.

Sikkerhedsoplysninger

• Always ensure the tail light is securely mounted and fully charged before each ride.
• The radar system is an aid and should not replace visual awareness and safe cycling practices.
• Regularly check the device for any damage or malfunctions.
• Do not look directly into the light when it is active to avoid eye strain.
• Opbevares utilgængeligt for børn.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Bike Tail Light (1)
• Sadelpindbeslag (1)
• Saddle Rail Mount (1)
• USB-C opladningskabel (1)
• Brugervejledning (1)

Produkt overview

The CYCLAMI RT02 integrates a 24GHz radar sensor with a high-visibility tail light. Key features include:

• 24GHz Millimeter-Wave Radar: Detects vehicles up to 60 meters away with a 54° wide-angle.
• Active Alert System: Provides dual-tone audio warnings (1 beep at 60m, 2 beeps at 10m) and rapid light flashes for approaching vehicles.
• Bremseføler: Automatically activates an ultra-bright red light during sudden stops.
• Group Riding Mode: Filters out same-speed teammates to prevent false alerts.
• Flere lystilstande: Five modes available: Steady, Fast Flash, Slow Flash, Breath, and SOS.
• Lang batterilevetid: 1000mAh battery provides 3-6 hours runtime, USB-C rechargeable.
• Vibrationsopvågning: Power-saving feature that activates the device only when motion is detected.
• Holdbar konstruktion: IP64 waterproof aluminum alloy + PC shell.

Billede: Top og bund view of the CYCLAMI RT02 Radar Tail Light, highlighting its compact design and control buttons.

Opsætning og installation

The RT02 offers dual installation options for versatility.

1. Montering af sadelpindbeslag

1. Attach the seatpost mount to your bicycle's seatpost using the provided straps or bands. Ensure it is tight and stable.
2. Slide the RT02 tail light onto the mount until it clicks securely into place.
3. Adjust the angle so the light faces directly backward and the radar has an unobstructed view.

2. Montering af sadelskinnebeslag

1. Secure the saddle rail mount to the rails under your bicycle saddle.
2. Slide the RT02 tail light onto the mount until it locks.
3. Verify the light is horizontal and facing directly backward.

Image: The CYCLAMI RT02 Radar Tail Light installed on a bicycle, demonstrating its low-profile og sikker pasform.

Betjeningsvejledning

Tænd/sluk

• To power on, press and hold the power button for 2 seconds. The light will illuminate.
• To power off, press and hold the power button for 2 seconds. The light will turn off.

Valg af tilstand

Short press the power button to cycle through the 5 available lighting modes: Steady, Fast Flash, Slow Flash, Breath, and SOS.

Radarfunktionalitet

The 24GHz radar continuously monitors for vehicles approaching from behind within a 60-meter range and 54° angle.

• Lydadvarsler: A single beep sounds when a vehicle is detected at approximately 60 meters. Two rapid beeps sound when the vehicle is within 10 meters.
• Visuelle advarsler: The tail light will flash rapidly to alert the rider and the approaching vehicle.
• Group Riding Mode: This mode intelligently filters out other cyclists riding at similar speeds, reducing unnecessary alerts during group rides.

Image: Illustration of the radar active warning system, showing a cyclist and an approaching vehicle with radar detection range.

Bremseføler

The integrated high-precision brake sensor detects sudden deceleration. Upon braking, the tail light automatically switches to an ultra-bright red light to signal to vehicles behind you.

Vibration Wake-Up

To conserve battery, the device enters a dormant state after 30 seconds of inactivity. It automatically wakes up and resumes operation when vibration (motion) is detected, such as when you start riding.

Opladning

The CYCLAMI RT02 is equipped with a 1000mAh rechargeable battery.

• Connect the provided USB-C cable to the charging port on the device and to a standard USB power source (e.g., computer, wall adapter).
• En fuld opladning tager typisk cirka 2 timer.
• Indikatorlampen viser opladningsstatus (f.eks. rød for opladning, grøn for fuldt opladet).

Opretholdelse

• Clean the lens and radar sensor regularly with a soft, damp klud for at sikre optimal ydeevne.
• Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
• Opbevar enheden på et køligt, tørt sted, når det ikke er i brug.
• Ensure the USB-C port cover is securely closed to maintain IP64 water resistance.

Fejlfinding

Specifikationer

• Modelnavn: RT02-US
• Radarfrekvens: 24 GHz
• Radar Detection Range: Op til 60 meter
• Radar Detection Angle: 54°
• Sigtbarhed: 500m
• Batterikapacitet: 1000mAh
• Opladningsport: USB-C
• Opladningstid: Cirka 2 timer
• Kørselstid: 3-6 timer (afhængigt af tilstand)
• Vandtæt vurdering: IP64
• Materiale: Aluminiumlegering + PC
• Varens vægt: 54 gram
• Dimensioner: 2.44 cm x 1.65 cm x 0.94 cm (omtrentligt, baseret på punkttegn)

Garanti og support

The CYCLAMI RT02 Bike Radar Tail Light comes with a 1 års garanti from the date of purchase. For technical support, warranty claims, or any inquiries, please contact the seller, SoRider, or CYCLAMI customer support.

Seller: SoRider

Please refer to your purchase documentation for specific contact details or visit the official CYCLAMI webwebsted for yderligere hjælp.

Produktvideoer