1. Introduktion
This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your KINGSOM 100W Solder Fume Extractor. This device is designed to capture and filter fumes and particulates generated during various activities, ensuring a cleaner and safer working environment. Please read this manual thoroughly before using the product and retain it for future reference.
Image 1.1: KINGSOM 100W Solder Fume Extractor with its flexible duct and filter components.
2. Sikkerhedsinstruktioner
Always follow these basic safety precautions to reduce the risk of injury or damage to the unit:
- Read all instructions before operating the fume extractor.
- Sørg for, at strømforsyningen overholder specifikationerne på produktetiketten.
- Betjen ikke enheden med en beskadiget strømledning eller stik.
- Hold enheden væk fra vand eller overdreven fugt.
- Bloker ikke luftindtag eller -udtag under drift.
- Udskift filtre regelmæssigt som anvist for at opretholde optimal ydeevne og sikkerhed.
- Do not attempt to service the unit beyond what is described in this manual. Refer all servicing to qualified personnel.
- Sørg for, at enheden er placeret på en stabil, plan overflade.
3. Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- KINGSOM Fume Extractor Main Unit (with integrated motor)
- Flexible Duct (1.2m / 47.24 inches)
- Sugehætte
- Main Filter (1 installed)
- Pre-Filters (5 pieces)
- Strømledning
- Brugermanual
Image 3.1: Contents of the KINGSOM Fume Extractor package.
4. Produktet er slutview
4.1 Hovedkomponenter
- Hovedenhed: Houses the motor, control panel, and filter compartment.
- Flexible Duct: A 1.2m (47.24 inch) long, 360° rotatable duct for precise fume extraction positioning.
- Suction Hood: Attaches to the end of the duct to capture fumes effectively.
- Kontrolpanel: Features power button and fan speed adjustment.
- Filterrum: Holds the pre-filters and the main 2-in-1 HEPA + Activated Carbon filter.
4.2 Nøglefunktioner
- Kraftig børsteløs motor: Provides strong and stable continuous power with low noise operation (≤52dB).
- 2-in-1 High-Efficiency Filter: Combines H13 HEPA and high iodine activated carbon for 99.97% purification efficiency, capturing particles as small as 0.3 microns and PM2.5.
- Justerbar blæserhastighed: Three gear settings to suit different application needs.
- 360° Arbitrary Bending Duct: Allows for flexible positioning to target fume sources.
- Hukommelsesfunktion: Remembers the last used fan speed setting.
- Holdbar konstruktion: High-quality components for extended product lifespan.
Image 4.1: Product dimensions and detailed features of the KINGSOM Fume Extractor.
5. Opsætning
5.1 Udpakning
- Fjern forsigtigt alle komponenter fra emballagen.
- Inspect all parts for any signs of damage. If any damage is found, do not proceed with assembly and contact customer support.
- Gem emballagematerialerne til senere transport eller opbevaring.
5.2 Montering
- Placer hovedenheden på en stabil, plan overflade.
- Attach the flexible duct to the air inlet on top of the main unit by screwing it clockwise until secure.
- Attach the suction hood to the free end of the flexible duct.
- Sørg for, at alle forbindelser er tætte for at forhindre luftlækage.
5.3 Filterinstallation (første opsætning)
The main filter and one pre-filter are typically pre-installed. If not, or for replacement:
- Unlock and open the top cover of the main unit.
- Insert the main 2-in-1 filter into the filter compartment, ensuring it sits correctly.
- Place a pre-filter on top of the main filter.
- Close the top cover and secure the locks.
6. Betjeningsvejledning
6.1 Tænd/sluk
- Connect the power cord to the unit and then to a suitable electrical outlet.
- Tryk på ON/OFF button on the control panel to turn the unit on. The indicator light will illuminate.
- Tryk på ON/OFF knappen igen for at slukke for enheden.
6.2 Justering af ventilatorhastighed
The unit features three adjustable fan speed settings:
- Tryk på FLYDE button to cycle through the three speed settings (Low, Medium, High).
- Select the appropriate speed based on the intensity of fumes and the working environment.
- The unit will remember the last used speed setting when powered off and on again.
Image 6.1: Control panel with ON/OFF and FLOW buttons for fan speed adjustment.
6.3 Positioning the Duct
The flexible duct can be bent and rotated 360° to direct the suction hood precisely over the source of fumes. Position the hood as close as possible to the work area without obstructing your work or creating a fire hazard.
6.4 Ansøgninger
This fume extractor is suitable for various applications, including:
- Soldering and DIY electronics work
- Lasergravering og skæring
- 3D print
- Nail salons
- Light welding tasks
Images 6.2 & 6.3: Fume extractor in use during soldering.
Images 6.4 & 6.5: Fume extractor applications for laser engraving and 3D printing.
7. Vedligeholdelse
7.1 Filterudskiftning
Regular filter replacement is crucial for maintaining the performance and efficiency of your fume extractor. The pre-filters should be checked and replaced more frequently than the main filter.
- Ensure the unit is powered off and unplugged from the electrical outlet.
- Unlock and open the top cover of the main unit.
- Carefully remove the saturated pre-filter(s) and dispose of them properly.
- If replacing the main filter, lift it out of the compartment.
- Insert the new main filter, ensuring it is seated correctly.
- Place a new pre-filter on top of the main filter.
- Close the top cover and secure the locks.
Filterets levetid: Under normal usage conditions, the service life of the main filter set is typically 6 to 9 months. Pre-filters should be replaced more frequently depending on usage and environment.
Billede 7.1: Trin til filterudskiftning.
7.2 Rengøring
- Tør ydersiden af enheden af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Sørg for, at enheden er taget ud af stikkontakten før rengøring.
- Periodically check the duct and hood for any blockages or debris and clean as necessary.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke | No power supply; Power cord loose; Unit fuse blown | Check power outlet; Ensure power cord is securely connected; Check and replace fuses (refer to Section 4.1 for fuse location). |
| Svagt sug | Saturated filters; Blocked duct/hood; Air leaks in connections | Replace pre-filters and/or main filter; Clear any blockages; Ensure duct and hood are securely attached. |
| Usædvanlig støj under drift | Loose components; Foreign object in fan; Unit not on a stable surface | Check for loose parts; Power off and inspect for foreign objects (if safe to do so); Place unit on a stable, level surface. |
| Fumes not effectively removed | Incorrect duct positioning; Filters saturated; Fan speed too low | Reposition duct closer to fume source; Replace filters; Increase fan speed. |
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | K-Soon2-New |
| Mærke | KINGSOM |
| Strømkilde | DC |
| Wattage | 100 watt |
| Luftmængde | 210 m³/t |
| Filtertype | 2-in-1 HEPA H13 + Activated Carbon |
| Støjniveau | ≤52dB (at highest speed) |
| Varens vægt | 18.41 pund |
| Pakkedimensioner | 18.13 x 13.63 x 12.5 tommer |
| Kanallængde | 1.2 m (47.24 tommer) |
| Farve | Hvid |
10. Garanti og support
10.1 Garantioplysninger
KINGSOM products are manufactured to high-quality standards. Please refer to your purchase documentation for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
10.2 Kundesupport
For any product questions, technical difficulties, or after-sales service, please contact KINGSOM customer support. We offer 24/7 after-sales service response and lifetime technical support.
- Online support: Visit the official KINGSOM website or contact through your retailer's support portal.
- E-mail support: Se din produktemballage eller den officielle webwebsted for kontakt-e-mail.