Bogen AFI-8B Contractor Series Bi-Amped Loudspeaker Instruction Manual

1. Introduktion

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Bogen AFI-8B Contractor Series Bi-Amped Loudspeaker. Please read this manual thoroughly before using the product and retain it for future reference. The AFI-8B is a high-performance, two-way loudspeaker designed for professional audio applications, offering robust power handling and precise sound reproduction.

Figur 1: Forside view of the Bogen AFI-8B Loudspeaker.

2. Sikkerhedsinstruktioner

WARNING: To prevent fire or electric shock, do not expose this appliance to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified personnel.

• Læs disse instruktioner omhyggeligt før brug.
• Gem disse instruktioner til fremtidig reference.
• Overhold alle advarsler på produktet og i betjeningsvejledningen.
• Følg alle instruktioner.
• Brug ikke dette apparat i nærheden af ​​vand.
• Rengør kun med en tør klud.
• Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
• Må ikke installeres i nærheden af ​​varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
• Brug kun tilbehør/tilbehør specificeret af producenten.
• Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
• Ensure proper rigging and mounting procedures are followed to prevent injury or damage. Consult a qualified professional for installation if unsure.

3. Produktet er slutview

The Bogen AFI-8B loudspeaker is engineered for high-fidelity sound reproduction in demanding environments. Key features and components include:

• Driver komplement:
  • Lavfrekvens: One Apogee 15" (381mm) neodymium magnet cone-type driver. This driver is treated with a waterproofing compound for moisture resistance and long-term stability of cone resonance and mass parameters. It also features Ferrofluid for enhanced power handling, reduced distortion, and controlled short-term impedance rise.
  • Høj frekvens: One Apogee 3" (76mm) voice coil, 2" (51mm) exit horn-loaded compression driver. This driver is also treated with Ferrofluid for improved power handling, lower distortion, and stable impedance.
• Indgangsstik: Barrier strip, screw type #8, for secure and reliable audio connections.
• Håndtag: Two integrated handles (one top, one bottom) designed as part of the enclosure for easy transport and positioning, ensuring no moving parts.
• Gitter: Highly durable, quality finish on perforated steel, providing protection for the drivers.
• Rigging hardware: Fourteen rigging points are provided for versatile installation. There are four points each on the top and bottom, and two each on both sides and the rear. All points are backed with 16-gauge steel and can accommodate 3/8"-16 or M10 thread types.
• Slutte: Textured high-strength black epoxy paint for durability and a professional appearance.
• Indkapslingstype: 30° trapezoidal, optimally-vented bass design for enhanced low-frequency performance.
• Skabskonstruktion: Multi-ply hardwood for robust structural integrity.

4. Opsætning

4.1 Placering og montering

The AFI-8B loudspeaker features a 30° trapezoidal enclosure, allowing for array configurations. Its dispersion pattern is H: 60° x V: 40°. Consider this when determining placement to achieve optimal sound coverage.

For permanent installations, utilize the fourteen rigging points. Ensure that the mounting surface and hardware can safely support the loudspeaker's weight (77 lb). Use appropriate 3/8"-16 or M10 threaded hardware. Always consult with a qualified installer for complex rigging setups.

4.2 Elektriske forbindelser

The AFI-8B is a bi-amped loudspeaker, meaning separate amplifier channels are required for the low-frequency and high-frequency drivers. Connect your amplifiers to the barrier strip, screw-type #8 input connectors on the loudspeaker.

• Ensure all power to amplifiers and other audio equipment is turned OFF before making connections.
• Use appropriate gauge speaker wire for the distance and power requirements.
• Observe correct polarity (+ and -) for all connections to prevent phase issues.
• Anbefalet crossover: For full technical data on DSP-based processors and crossover settings, contact Apogee Sound. Proper crossover settings are crucial for optimal bi-amped performance and driver protection.

5. Betjeningsvejledning

Once the loudspeaker is properly installed and connected, follow these guidelines for operation:

• Tænd sekvens: Always power on your audio source and mixer first, then your amplifiers. When powering off, reverse this sequence: amplifiers off first, then mixer and source. This prevents transient pops that can damage speakers.
• AmpLifier-matchning: Sørg for din amplifiers are appropriately matched to the loudspeaker's power handling capabilities. The AFI-8B has a maximum power handling of 400W continuous and 1600W peak. The nominal impedance for each driver is 8 ohms.
• Få Staging: Sæt amplifier gains and mixer levels carefully to avoid clipping (distortion) which can damage the drivers. Monitor your audio signal for any signs of distortion.
• Monitoring Sound Levels: The loudspeaker has a maximum SPL of 125dB continuous and 131dB peak. Prolonged exposure to high sound pressure levels can cause hearing damage. Use hearing protection when operating at high volumes.
• Frekvensrespons: The loudspeaker provides a frequency response of 46Hz to 20kHz (±3dB), offering a wide range for various audio applications.

6. Vedligeholdelse

Regular maintenance helps ensure the longevity and optimal performance of your AFI-8B loudspeaker.

• Rensning: Clean the cabinet and grille with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• Inspektion: Periodically inspect all connections (speaker cables, rigging hardware) for signs of wear, corrosion, or looseness. Tighten any loose connections.
• Miljø: Store and operate the loudspeaker in a stable environment, away from extreme temperatures, humidity, and direct sunlight.
• Professionel service: If you suspect any internal issues or damage, do not attempt to repair the unit yourself. Refer all servicing to qualified service personnel.

7. Fejlfinding

If you encounter issues with your AFI-8B loudspeaker, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, contact qualified service personnel.

8. Specifikationer

9. Garanti og support

For specific warranty information regarding your Bogen AFI-8B loudspeaker, please refer to the warranty card included with your product or contact the authorized Bogen dealer or distributor from whom you purchased the unit. Warranty terms and conditions may vary by region and seller.

For technical support, service, or inquiries about replacement parts, please contact your authorized Bogen service center or the manufacturer directly. Ensure you have your product model number (AFI-8B) and purchase details available when seeking support.