AUTOOL CT450 Fuel Injector Cleaner and Tester Machine

1. Introduktion

This manual provides detailed instructions for the safe and effective operation of your AUTOOL CT450 Fuel Injector Cleaner and Tester Machine. Please read this manual thoroughly before use and retain it for future reference. The CT450 is designed for cleaning and testing fuel injectors, including GDI, EFI, and FSI types, offering various voltage options and testing modes.

Image: The AUTOOL CT450 Fuel Injector Cleaner and Tester Machine, showcasing its compact design and multiple test tubes.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af udstyret:

• Sørg for, at maskinen er placeret på en stabil, plan overflade.
• Use only approved cleaning and testing fluids.
• Do not mix different types of cleaning or testing fluids.
• Brug passende personlige værnemidler (PPE), herunder sikkerhedsbriller og handsker.
• Keep the work area well-ventilated to avoid inhaling fumes from cleaning fluids.
• Afbryd strømmen, før du udfører vedligeholdelse eller rengøring.
• Keep flammable materials away from the machine, especially during heating operations.
• Only 12V injectors are supported for ultrasonic cleaning. 70V and 120V injectors are not supported for this specific function.

3. Produktet er slutview

The AUTOOL CT450 is an advanced fuel injector cleaning and testing system. It features ultrasonic heating cleaning, multiple testing modes, and compatibility with various injector types.

Nøglefunktioner:

• Ultrasonic Heating Cleaning: Cleans up to six injectors simultaneously with heating up to 50°C.
• 10 Testing Modes: Comprehensive testing including idle speed, medium speed, high speed, accelerating, shifting speed, leakage, and spray value tests.
• GDI, EFI, FSI Compatibility: Supports various injector types with 12V, 70V, and 120V voltage muligheder.
• Digital skærm: Intelligent digital display for function selection, pressure adjustment, pulse width, and working time.
• Six 110ml Glass Tubes: Allows simultaneous cleaning and testing of up to six injectors.
• Portable Storage Drawer: Convenient storage for connectors and accessories.

Kontrolpanel:

Image: The control panel of the AUTOOL CT450, showing the backlit digital display for functions, pulse width adjustment, working time/injection count, GDI/voltage selection, and pressure controls.

The control panel features a backlit digital display for real-time work data. It includes buttons for function selection, voltage selection (12V, 70V, 120V), and working pressure control.

4. Opsætning

4.1 Udpakning og inspektion

Carefully unpack all components. Verify that all parts listed in the 'What's in the Box' section are present and undamaged. If any items are missing or damaged, contact customer support.

4.2 Komponentidentifikation

Image: A selection of various injector connectors and adapters included with the CT450 machine, designed to fit different vehicle types.

The machine comes with a variety of connectors and adapters to accommodate different injector types. Utilize the portable storage drawer to keep these organized.

Billede: Et nærbillede view of the portable storage drawer located at the bottom of the CT450, designed for organizing various parts and accessories.

4.3 Injector Installation

Follow these steps to properly install injectors for cleaning or testing:

1. Install the appropriate injector connector and plugs into the straight oil separator.
2. Apply a small amount of grease to the injector "O" ring for a positive seal.
3. Install the straight oil separator and injector onto the upper plate holder.
4. Tighten with fixing screws and nuts. The injectors are now ready for testing or cleaning.

Image: A three-panel image illustrating the steps for installing an injector: installing the connector, applying grease to the O-ring, and securing the injector to the machine.

5. Betjeningsvejledning

5.1 Ultralydsrensning

The CT450 features ultrasonic cleaning with a heating function to effectively remove carbon deposits from injectors.

• Place the injectors in the ultrasonic bath.
• Vælg ultralydsrengøringsfunktionen på kontrolpanelet.
• The machine will heat the cleaning fluid up to 50°C for enhanced cleaning.
• For reverse flushing, install injectors in the opposite direction.
• Note: Only 12V injectors are supported for ultrasonic cleaning. 70V and 120V injectors are not compatible with this specific cleaning method.

Image: A visual representation of the ultrasonic cleaning process, showing injectors submerged in cleaning fluid and the temperature increasing from 3°C to 40°C.

5.2 Testing Modes

The CT450 offers 10 distinct testing modes to evaluate injector performance:

Image: A graphic detailing the three cleaning functions (Heated Ultrasonic Cleaning, Reverse Flushing, No-disassembly Cleaning) and ten testing functions (Idling Test, Medium Speed Test, High Speed Test, Accelerating Test, Shifting Speed Test, Leak Checking Test, Idling Spray Value Test, Medium Speed Spray Value Test, High Speed Spray Value Test, Pulse Injection Test).

• Tomgangstest: Simulates engine idling conditions (0-20ms pulse width).
• Test af mellemhastighed: Simulates medium engine speed (0-7.5ms pulse width).
• Højhastighedstest: Simulates high engine speed (0-4ms pulse width).
• Accelerationstest: Checks injector response during acceleration.
• Shifting Speed Test: Evaluates performance during gear shifts.
• Leak Checking Test: Registrerer enhver brændstoflækage fra injektorerne.
• Tomgangssprøjteværditest: Måler sprøjtemængden ved tomgang.
• Test af sprøjteværdi for mellemhastighed: Måler sprøjtemængden ved medium hastighed.
• Test af højhastighedssprøjteværdi: Måler sprøjtemængden ved høj hastighed.
• Pulsinjektionstest: Allows custom pulse width and count settings.

5.3 GDI, EFI, FSI & Multi-voltage Valgmuligheder

The CT450 is compatible with various injector types, including GDI, EFI, and FSI. It provides selectable voltage outputs to match different injector requirements.

Image: The CT450's GDI injector driver software interface, showing options for 12V, 70V, and 120V high-pressure injectors, with various injector types illustrated.

Vælg den relevante voltage (12V, 70V, or 120V) using the control panel to match the injector type. An automatic beep warning will sound if a voltage mismatch is detected.

5.4 Adjusting Test Parameters

The test time and pulse width for fuel injection can be adjusted as needed for specific testing scenarios.

Image: A close-up of the digital display showing adjustable parameters for 'Functions / Pulse Width Adjustment' and 'Working Time / Injection Count', with plus and minus buttons for modification.

5.5 Observing Test Results

The machine is equipped with features to aid in observing injector performance:

• Glass Tube Lighting: Provides clear illumination for observing the spray pattern and volume.
• Test Liquid Level Indicator: Allows monitoring of test fluid levels to prevent overflow and waste.

Image: A four-panel image highlighting features: glass tube lighting for clear observation, a test liquid level indicator, a cleaning fluid drain valve, and a side handle for portability.

5.6 Flow Rate Equalization, Injection Shape, and Leak Tests

These tests are crucial for diagnosing injector issues:

• Flow Rate Equalization: Observe the uniformity of fuel injection volume across all injectors. Pause or stop the test when the liquid level reaches 2/3 of the cylinder.
• Injection Shape Observation: Visually inspect the spray pattern of each injector for proper atomization.
• Lækagetest: Check for any drips or leaks from the injector nozzles under pressure.

Image: A three-panel image demonstrating the visual assessment during testing: top panel shows flow rate equalization, middle panel shows injection spray shape, and bottom panel shows a leak test.

5.7 Officiel produktvideo

6. Vedligeholdelse

6.1 Cleaning Fluid Management

Proper management of cleaning and testing fluids is essential for the longevity of the machine and effective results.

• After use, drain the cleaning fluid using the dedicated cleaning liquid discharge valve.
• Collect the used fluid in a suitable container for proper disposal or reuse, if applicable.
• Regularly clean the ultrasonic bath and test tubes to prevent residue buildup.

Image: A close-up of the cleaning liquid drain valve, used for safely discharging used cleaning fluid from the machine.

6.2 Generel pleje

• Hold maskinen ren og fri for støv og snavs.
• Opbevar maskinen et tørt og køligt sted, når den ikke er i brug.
• Ensure all connectors and accessories are stored properly in the drawer to prevent loss or damage.

7. Fejlfinding

This section addresses common issues you might encounter with the AUTOOL CT450.

If you encounter issues not listed here or require further assistance, please contact AUTOOL customer support.

8. Specifikationer

Image: A table displaying the product specifications of the AUTOOL CT450, including power supply, frequency, RPM range, fuel injection count, PWM pulse width, system pressure, time settings, cleaning tank capacity, test tube capacity, and ultrasonic cleaning frequency.

8.1 Hvad er der i æsken

The AUTOOL CT450 package includes:

• AUTOOL CT450 Fuel Injector Cleaner and Tester Machine
• Various injector connectors and adapters
• Strømadapter
• Brugermanual
• Other necessary accessories (e.g., funnel, cleaning fluid drain valve, test fluid level indicator)

9. Garanti og support

AUTOOL tilbyder en Tre-års garanti for the CT450 Fuel Injector Cleaner and Tester Machine. If any defects are found, AUTOOL will provide a new replacement or solutions to ensure customer satisfaction without delay. Lifetime technical support is also provided.

For any needs or inquiries, please contact AUTOOL customer support. We aim to respond within 24 hours.

Kontaktoplysninger: Refer to the official AUTOOL webwebstedet eller din købsdokumentation for de mest opdaterede kontaktoplysninger.