DEDRA SAS+ALL DED7046 Cordless Angle Grinder Instruction Manual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your DEDRA SAS+ALL DED7046 Cordless Angle Grinder. This tool is designed for cutting and grinding tasks. The motor reaches speeds of up to 8500 revolutions per minute (RPM) and is compatible with 125mm diameter discs. Please read these instructions carefully before using the tool and keep them for future reference.

The DED7046 features a safety switch, a quick-release disc system, a two-position side handle, and a rubberized grip for enhanced comfort and control. A two-hole disc change wrench is conveniently located in the side handle. The casing is made from fiberglass-reinforced nylon, offering increased resistance to mechanical damage and UV radiation.

2. Generelle sikkerhedsinstruktioner

ADVARSEL: Læs alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Undladelse af at følge alle instruktionerne nedenfor kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

• Sikkerhed på arbejdsområdet: Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Elværktøjsstik skal passe til stikkontakten. Modificer aldrig stikket på nogen måde. Misbrug ikke ledningen. Hold ledningen væk fra varme, olie, skarpe kanter eller bevægelige dele.
• Personlig sikkerhed: Always wear eye protection. Use hearing protection when operating for extended periods. Wear a dust mask if operations create dust. Dress properly; do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
• Brug og vedligeholdelse af elværktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøjet.
• Brug og vedligeholdelse af batteriværktøj: Genoplad kun med den oplader, der er angivet af producenten. Brug kun elværktøj med specifikt beregnede batteripakker.
• Service: Få dit elværktøj efterset af en kvalificeret reparatør, der kun bruger identiske reservedele.

3. Produktkomponenter

Familiarize yourself with the main components of your DEDRA SAS+ALL DED7046 Cordless Angle Grinder:

• Main Unit (Angle Grinder Body)
• Hjælpehåndtag (sidehåndtag)
• Sanding Disc Guard
• Two-hole Disc Change Wrench
• Battery Slot (Battery not included)

Figur 1: Samlet set view of the DEDRA SAS+ALL DED7046 Cordless Angle Grinder with the auxiliary handle attached.

Figur 2: Bagside view of the angle grinder, highlighting the battery slot. Please note that the battery is sold separately.

Figure 3: The DEDRA SAS+ALL DED7046 Cordless Angle Grinder shown with its included accessories: the auxiliary handle, disc guard, and disc change wrench.

Figure 4: The DEDRA SAS+ALL DED7046 Cordless Angle Grinder with the auxiliary handle attached, ready for use.

4. Opsætning

4.1 Batteriinstallation (batteri medfølger ikke)

This angle grinder operates on a DEDRA SAS+ALL battery (sold separately). Ensure the battery is fully charged before use.

1. Align the battery pack with the battery slot at the base of the grinder.
2. Skub batteripakken ind i åbningen, indtil den klikker sikkert på plads.
3. For at fjerne batteriet skal du trykke på batteriets udløserknap og skubbe det ud.

Figure 5: The angle grinder with the battery slot visible. Remember, the battery is a separate purchase.

4.2 Fastgørelse af ekstra håndtag

The auxiliary handle can be attached to either side of the grinder head for optimal control and comfort, depending on your working position.

1. Screw the auxiliary handle into one of the threaded holes on the grinder head.
2. Tighten it firmly by hand.

4.3 Disc Guard Adjustment

The disc guard protects against sparks and debris. Adjust its position to suit your task, ensuring maximum protection.

1. Loosen the screw or lever on the disc guard.
2. Drej beskyttelsesskærmen til den ønskede position.
3. Tighten the screw or lever securely.

4.4 Diskinstallation

Always ensure the grinder is switched off and the battery is removed before changing discs.

1. Tryk og hold spindellåseknappen nede.
2. Use the two-hole disc change wrench (stored in the side handle) to loosen the outer flange nut by turning it counter-clockwise.
3. Fjern den ydre flangemøtrik og den gamle skive.
4. Place the new 125mm disc onto the inner flange, ensuring it is correctly seated.
5. Replace the outer flange nut and tighten it clockwise using the wrench while holding the spindle lock button. Do not overtighten.

Figure 6: Close-up of the disc mounting area, showing the spindle and flange for disc installation.

5. Betjeningsvejledning

5.1 Tænd/sluk

The grinder is equipped with an integrated safety on/off system.

1. At tænde: Slide the safety switch forward and then press the main power switch.
2. At slukke: Release the main power switch. The safety switch will automatically return to the off position.

5.2 Hastighedskontrol

This model features variable speed control, allowing adjustment between 4000-8500 RPM for different applications.

1. Locate the speed adjustment dial, typically found on the body of the grinder.
2. Rotate the dial to select the desired speed setting. Lower speeds are suitable for polishing or less aggressive grinding, while higher speeds are for cutting and heavy grinding.

5.3 Slibe- og skæreteknikker

Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and gloves.

• Slibning: Hold the grinder firmly with both hands. Position the disc at a slight angle (15-30 degrees) to the workpiece. Apply moderate pressure and move the grinder smoothly across the surface.
• Skæring: Use a thin cutting disc. Hold the grinder perpendicular (90 degrees) to the workpiece. Allow the disc to reach full speed before making contact. Apply light, consistent pressure and let the tool do the work. Avoid twisting or jamming the disc.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din vinkelslibers lange levetid og sikker drift.

• Rensning: After each use, clean the tool with a soft, dry cloth. Use compressed air to clear dust from ventilation openings. Do not use water or chemical cleaners.
• Udskiftning af disk: Replace worn or damaged discs immediately. Refer to Section 4.4 for disc installation instructions.
• Batteripleje: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Follow the battery manufacturer's charging instructions.
• Opbevaring: Store the angle grinder in a dry, secure location out of reach of children.

7. Fejlfinding

If you encounter issues with your DEDRA SAS+ALL DED7046, refer to the table below for common problems and solutions.

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the warranty card included with your product or visit the official Dedra webwebsted. Gem din købsbevis i tilfælde af garantikrav.

For technical support, spare parts, or service inquiries, please contact your local Dedra dealer or authorized service center. You can find contact information on the Dedra webhjemmeside eller gennem din forhandler.