LILYGO T-Connect-Pro ESP32S3 LoRa Multi-Communication Module with LCD Display User Manual

1. Introduktion

The LILYGO T-Connect-Pro is an advanced development board built around the ESP32S3 main controller. It features a modular design, consisting of three stacked circuit boards, and is equipped with a 2.33-inch TFT LCD display for interactive applications. This multi-functional module integrates various communication interfaces, making it suitable for a wide range of industrial and IoT applications requiring robust connectivity.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your T-Connect-Pro module.

2. Produktet er slutview

The T-Connect-Pro is designed for versatility, incorporating multiple communication protocols and onboard functionalities. Key features include:

• Hovedkontrol: ESP32S3-R8 with 16MB Flash and 8MB PSRAM.
• Trådløs forbindelse: 2.4GHz Wi-Fi and Bluetooth 5 (LE).
• LoRa Module: SX1262 chip supporting 433, 868, 915, 920MHz bands for long-range communication.
• Multi-Communication Modules: CAN (TD501MCANFD), RS485 (TD501D485H-A), and RS232 (TD501D232H) for diverse industrial communication needs.
• Ethernet-grænseflade: W5500 module with SPI 4-Wire bus interface.
• Vise: 2.33-inch TFT LCD with ST7796 drive chip and 222 RGB x 480 resolution.
• Onboard Functions: Relay interface, Capacitive Touch, and DC input.

Figure 2.1: Detailed specifications of the LILYGO T-Connect-Pro module.

Figur 2.2: Vinklet view of the T-Connect-Pro showing the LCD display and LoRa antenna.

2.1 Pakkens indhold

Standardpakken indeholder følgende varer:

• 1 x T-Connect-Pro Development Board
• 1 x LoRa Antenna

Figure 2.3: T-Connect-Pro and included antenna.

3. Opsætningsvejledning

3.1 Strømtilslutning

The T-Connect-Pro requires a 12-24V DC input for operation. Connect your power supply to the designated input terminals on the board, ensuring correct polarity (+ and -).

Figur 3.1: Øverst view showing the 12-24V DC input terminals.

3.2 Antenneinstallation

For LoRa communication, connect the provided antenna to the MMcx connector labeled 'LoRa MMcx' on the board. Ensure the connection is secure.

3.3 USB-forbindelse

The module can be connected to a computer via the USB-C port for programming and debugging. This port also provides 5V, 500mA power for the device when connected to a host.

3.4 Programmeringsmiljø

The T-Connect-Pro can be programmed using standard ESP32S3 development environments. Recommended platforms include:

• Arduino-IDE
• VS Code (with PlatformIO extension)

Refer to the official LILYGO GitHub repository for example code, libraries, and detailed programming guides: github.com/Xinyuan-LilyGO/T-Connect-Pro

Figur 3.2: Vinklet view highlighting the USB-C port, Ethernet port, and RST/BOT buttons.

4. Betjeningsvejledning

4.1 Indledende opstart

Once power is connected, the module will boot up. The LCD display will typically show boot information or the default application interface. If no custom firmware is loaded, it may display a test pattern or basic system information.

4.2 Using Communication Modules

The T-Connect-Pro integrates CAN, RS485, RS232, LoRa, and Ethernet for various communication needs. Implement the specific communication protocols in your firmware according to your application requirements. Refer to the ESP32S3 documentation and the LILYGO GitHub for programming examples for each interface.

Figure 4.1: T-Connect-Pro Pinmap detailing connections for LoRa, LCD, CAN, Ethernet, RS232, RS485, Relay, QWIIC, and DC-DC.

4.3 LCD Display and Capacitive Touch

The 2.33-inch TFT LCD provides visual output. The module also supports capacitive touch, allowing for interactive user interfaces. Develop your application to utilize these features for data display and user input.

4.4 Relæstyring

The onboard relay interface allows for control of external devices. Program the ESP32S3 to activate or deactivate the relay based on your application logic.

5. Vedligeholdelse

To ensure the longevity and reliable operation of your T-Connect-Pro module, follow these maintenance guidelines:

• Rensning: Keep the module clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners directly on the board.
• Miljø: Operate the module within its specified environmental conditions (temperature, humidity). Avoid extreme temperatures or high humidity.
• Forbindelser: Periodically check all connections (power, antenna, communication cables) to ensure they are secure and free from damage.
• Firmwareopdateringer: Regularly check the LILYGO GitHub repository for firmware updates or bug fixes to ensure optimal performance and security.

6. Fejlfinding

If you encounter issues with your T-Connect-Pro module, consider the following troubleshooting steps:

• Ingen strøm: Ensure the 12-24V DC power supply is correctly connected and providing the specified voltage. Check for correct polarity.
• Modulet svarer ikke: Try pressing the 'RST' (Reset) button. If the issue persists, disconnect and reconnect power.
• Programmeringsproblemer: Verify that the correct drivers are installed for the USB-C interface. Ensure your programming environment (Arduino-IDE, VS Code) is correctly configured for the ESP32S3. Check your code for errors.
• Kommunikationsfejl: Double-check all wiring for CAN, RS485, RS232, LoRa, and Ethernet. Ensure the correct communication parameters (baud rate, addresses, etc.) are configured in your software. For LoRa, ensure the antenna is properly connected.
• Skærm virker ikke: Check power supply. If the display remains blank or shows artifacts, ensure the display module is securely seated.

7. Specifikationer

Figure 7.1: Approximate dimensions of the T-Connect-Pro module.

8. Garanti og support

LILYGO products are designed for reliability and performance. This product is subject to a 30-day return policy from the date of purchase.

For technical assistance, questions, or suggestions regarding the T-Connect-Pro module, please contact LILYGO customer support. We are committed to providing timely responses and assistance to ensure your satisfaction.

You can also find additional resources and community support on the official LILYGO GitHub page: github.com/Xinyuan-LilyGO/T-Connect-Pro