Colorkey Creator Spot 250 Moving Head Stage Lysbrugsanvisning

1. Introduktion

This manual provides essential information for the safe and efficient operation of your Colorkey Creator Spot 250 Moving Head Stage Light. Please read these instructions thoroughly before installation, operation, or maintenance to ensure proper use and to prevent damage to the unit or injury to personnel.

The Colorkey Creator Spot 250 is a compact and bright 200W LED Moving Head Spot fixture designed for professional stage and event lighting. It features rotating and static gobos, a 6-facet prism, and vibrant color effects, making it a versatile tool for various lighting applications.

2. Sikkerhedsoplysninger

Always observe the following safety precautions to reduce the risk of electrical shock, fire, or personal injury:

• Elektrisk tilslutning: Sørg for, at strømforsyningen voltage matcher voltage specified on the fixture. Always connect to a grounded circuit.
• Installation: Install the fixture in a well-ventilated area, away from flammable materials. Ensure secure mounting to prevent accidental falls.
• Temperatur: Do not operate the fixture in environments exceeding 40°C (104°F). Allow adequate space around the fixture for cooling.
• Opretholdelse: Disconnect the fixture from the power supply before any cleaning, maintenance, or repair. Only qualified personnel should perform service.
• Øjensikkerhed: Avoid direct eye exposure to the light source. The light output is intense and can cause eye damage.
• Vandeksponering: Do not expose the fixture to rain or moisture. This fixture is for indoor use only.

3. Produktet er slutview

3.1 Nøglefunktioner

• Light Source: 200W White LED; Halo: 20pcs RGB LEDs, with rich built-in dynamic effects.
• Brightness: 8650 lux @ 5 meters.
• Beam Angle: 14°, with a 64mm output lens diameter.
• Color Wheel: 8 colors + open, split colors, and rainbow effect.
• Static Gobo Wheel: 7 gobos + open, with gobo shake.
• Rotating Gobo Wheel: 6 gobos + open, with gobo shake, Texture.

3.2 Hvad er der i æsken

• Colorkey Creator Spot 250 Lighting Fixture
• Power Cable (Corded Electric)
• Instruktionsmanual (dette dokument)

3.3 Produktdiagram

Figur 1: Front view of the Colorkey Creator Spot 250. The image displays the black moving head fixture with its lens emitting a vibrant, multi-colored light. The base features a control panel with an LCD screen and navigation buttons (Menu, OK, Up, Down, Back), along with the "CREATOR SPOT 250" branding.

4. Opsætning

4.1 Montering

The Creator Spot 250 can be mounted in various orientations (e.g., truss, floor). Always use appropriate clamps and safety cables to secure the fixture. Ensure the mounting surface or structure can support the fixture's weight (approximately 38 pounds) and any additional equipment.

4.2 Strømtilslutning

Connect the provided power cable to the fixture's power input and then to a suitable grounded electrical outlet. Verify that the power supply voltage matcher armaturets krav.

4.3 DMX-tilslutning (valgfrit)

For external control, connect a DMX controller to the fixture's DMX input using a standard 3-pin or 5-pin DMX cable. If linking multiple fixtures, connect them in a daisy chain configuration, ensuring the last fixture in the chain has a DMX terminator installed.

5. Betjeningsvejledning

5.1 Kontrolpanel

The fixture features an intuitive control panel with an LCD display and navigation buttons:

• MENU: Accesses the main menu or navigates back to the previous menu level.
• OP NED: Navigerer gennem menupunkter eller justerer parameterværdier.
• OK: Bekræfter et valg eller går ind i en undermenu.
• TILBAGE: Forlader den aktuelle menu eller annullerer en handling.

The LCD display shows current settings, DMX address, and operational status. Refer to the on-screen menu for specific parameter adjustments.

5.2 DMX-styring

To control the Creator Spot 250 via DMX, set the fixture's DMX address using the control panel. Consult the DMX channel chart (typically found in a separate DMX protocol document or appendix) for detailed information on controlling specific functions like pan, tilt, color, gobos, and prism effects.

5.3 Stand-alone betjening

The fixture includes built-in programs for standalone operation without an external DMX controller. These programs can be selected and configured via the control panel menu. Options typically include sound-active modes, auto-run sequences, and master/slave configurations.

6. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your Creator Spot 250.

• Rensning: Rengør udvendigt med jævne mellemrumasing and optical lenses with a soft, lint-free cloth. For stubborn dirt, use a mild glass cleaner. Ensure no liquid enters the fixture.
• Inspektion: Efterse regelmæssigt strømkabler, DMX-kabler og monteringsudstyr for tegn på slid, skader eller løse forbindelser.
• Ventilation: Sørg for, at ventilationsåbningerne er fri for støv og snavs for at forhindre overophedning.
• Internal Service: Internal cleaning or repairs should only be performed by authorized service technicians.

7. Fejlfinding

If you encounter issues with your Creator Spot 250, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Colorkey customer support.

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the official Colorkey webwebstedet eller kontakt din autoriserede forhandler. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Colorkey Support: Visit the Colorkey Store on Amazon