Radiomaster Pocket Hall Gimbal Transmitter Remote Control Manual

Indledning

The Radiomaster Pocket is a compact and lightweight remote control transmitter designed for various RC applications. It features Hall gimbals, a foldable antenna, and is available in different versions, including CC2500 and ExpressLRS. This manual provides essential information for setting up, operating, and maintaining your Radiomaster Pocket.

Hvad er der i æsken

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• 1 x Pocket Radio
• 1 x specialfremstillet bæretaske
• 1 x USB-C kabel
• 1 x skærmbeskytter
• 1 x klistermærke
• 1 x Manual (dette dokument)
• 4 x Low Tension Springs (for gimbals)

Produkt overview

The Radiomaster Pocket is designed for portability and performance. Key features include:

• Hall-effekt gimbals: For smooth centering and precise response.
• Indbygget LED lys: To visualize your inputs.
• Bærbart og let design: Nem at transportere og opbevare.
• Foldable Antenna: Forbedrer bærbarheden.
• Removable Stick Ends: For customization and compact storage.
• Baggrundsbelyst LCD-skærm: Offers a clear balance of size and functionality.
• Ekstern modulbås: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• 18650 Batterikompatibilitet: Provides extended battery life (batteries not included).
• Pre-installed EdgeTX Firmware: Ready for advanced customization and control.

Opsætning

1. Batteriinstallation

The Radiomaster Pocket requires two 18650 batteries (not included). To install:

1. Find batterirummet på bagsiden af ​​senderen.
2. Åbn dækslet til rummet.
3. Insert two 18650 batteries, ensuring correct polarity.
4. Luk batterirummets dæksel forsvarligt.

2. Første opstart

Press and hold the power button located on the front of the transmitter until the screen illuminates and the EdgeTX firmware loads. The transmitter will perform a self-check upon startup.

3. Antenna and Stick Ends

• Antenne: Unfold the antenna to its upright position for optimal signal transmission. Fold it down for storage.
• Stick Ends: The transmitter comes with removable stick ends. You can customize them or remove them for more compact storage.

Betjeningsvejledning

1. Grundlæggende kontroller

Gør dig bekendt med de vigtigste betjeningselementer:

• Gimbaler: Control primary flight surfaces (throttle, rudder, aileron, elevator).
• Trimknapper: Used for fine-tuning channel outputs.
• Navigationsknapper: For menu navigation on the LCD screen.
• Power knap: Turns the unit on/off and can be used for menu selection.

2. Justering af gimbal

The gimbals can be adjusted for tension and self-centering. Refer to Figure 7 for adjustment points:

• A (I-R): Turn clockwise to disable self-centering (throttle). Turn counter-clockwise to enable self-centering (throttle).
• B (T): To adjust the throttle stick tension. Turn clockwise to increase stick tension. Turn counter-clockwise to decrease stick tension.
• C (UP-DOWN): Turn clockwise to increase vertical stick tension. Turn counter-clockwise to decrease stick tension.
• D (LEFT-RIGHT): Turn clockwise to increase horizontal stick tension. Turn counter-clockwise to decrease stick tension.

Specifikationer

Opretholdelse

• Rensning: Brug en blød, tør klud til at rengøre senderens yderside. Undgå at bruge skrappe kemikalier eller opløsningsmidler.
• Opbevaring: Opbevar senderen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer. Fjern batterierne, hvis den opbevares i længere perioder.
• Firmwareopdateringer: Periodically check the official Radiomaster webwebsted for firmwareopdateringer for at sikre optimal ydeevne og adgang til nye funktioner.

Fejlfinding

Almindelige problemer og løsninger:

• Senderen tænder ikke:
  • Sørg for, at batterierne er korrekt installeret og fuldt opladet.
  • Kontroller batteriets polaritet.
• Intet signal til modtageren:
  • Verify the antenna is unfolded and in an upright position.
  • Ensure the transmitter and receiver are properly bound. Refer to your receiver's manual for binding instructions.
  • Kontroller for interferens fra andre 2.4 GHz-enheder.
• Gimbal response issues:
  • Check gimbal tension settings as described in the "Gimbal Adjustment" section.
  • Calibrate gimbals through the EdgeTX firmware settings if necessary.

For further assistance, please refer to the official Radiomaster support resources or community forums.

Vigtige sikkerhedsoplysninger

• Always operate your RC equipment responsibly and in accordance with local laws and regulations.
• Ensure your batteries are in good condition and charged properly.
• Never operate your RC model near people, animals, or property that could be damaged.
• Perform pre-flight checks before each use to ensure all controls are functioning correctly.
• Keep the transmitter away from water and moisture, as it is not water resistant.

Garanti og support

For information regarding warranty coverage, technical support, or service, please visit the official Radiomaster webwebstedet eller kontakt din autoriserede forhandler. Gem din købsbevis til garantikrav.