ROCKBROS Bike Handlebar End Plugs Light User Manual

1. Introduktion og overview

The ROCKBROS Bike Handlebar End Plugs Light is designed to enhance cycling safety and visibility. This rechargeable light features intelligent sensing capabilities, multiple lighting modes, and a unique sync mode for coordinated lighting. It is built with IPX6 waterproofing to withstand various weather conditions.

Image 1.1: The ROCKBROS Bike Handlebar End Plugs Light installed on a bicycle, showcasing its compact design and red illumination.

2. Pakkens indhold

Kontroller venligst, at alle komponenter er til stede i pakken:

• ROCKBROS Bike Handlebar End Plugs Light (2 units)
• Mounts for installation
• Installationsværktøjer
• USB ladekabel
• Brugermanual

3. Sikkerhedsoplysninger

Read all instructions before use. Failure to follow these instructions may result in injury or damage to the product.

• Ensure lights are securely mounted before each ride.
• Se ikke direkte ind i lysstrålen for at undgå at belaste øjnene.
• Opbevares utilgængeligt for børn.
• Brug kun det medfølgende opladningskabel eller en kompatibel USB-oplader.
• Skil ikke lysene ad eller modificer dem.

4. Opsætning og installation

The handlebar end lights are designed for effortless installation. Use the included mounts and tools to secure the lights into the ends of your bicycle handlebars.

1. Insert the light into the end of your handlebar.
2. Twist the light to adjust its size and ensure a snug fit within the handlebar.
3. Tighten any screws with the provided tools to lock the light securely in place.
4. Verify that both lights are firmly attached and do not wobble before riding.

Billede 4.1: Et nærbillede view of the ROCKBROS Bike Handlebar End Plugs Light correctly installed on a bicycle handlebar, showing its flush integration.

Image 4.2: Both handlebar end lights illuminated on a bicycle, demonstrating their visibility from the rear.

5. Opladningsinstruktioner

The lights are equipped with a 250mAh battery and charge via a C-mount (USB-C) port.

1. Locate the charging port on each light.
2. Ensure the dust-proof plug is removed before charging.
3. Connect the provided USB charging cable to the light and a compatible USB power source (e.g., computer, wall adapter).
4. Indikatorlampen viser opladningsstatus (f.eks. rød for opladning, grøn for fuldt opladet).
5. Once fully charged, disconnect the cable and securely fasten the dust-proof plug to maintain IPX6 waterproof performance.

Image 5.1: Visual representation of the 250mAh C-mount charging feature, along with brake detection, static sleep, and life waterproof capabilities.

6. Betjeningsvejledning

6.1 Tænd/sluk

Press and hold the power button for approximately 2 seconds to turn the lights on or off.

6.2 belysningstilstande

Cycle through the five available lighting modes by short-pressing the power button:

• Konstant tændt: Giver kontinuerlig belysning.
• Hurtigt flash: Rapid flashing for high visibility.
• Åndedrætsblink: Lyset falmer jævnt ind og ud.
• Lightning Flash: Irregular, quick flashes.
• High-Frequency Flash: Very rapid, consistent flashing.

Each mode offers 7-13 hours of continuous lighting depending on brightness level.

6.3 Sync Mode

To activate Sync Mode, power on the lights, then double-tap the button on one of the bike lights. A green shimmer will indicate that Sync Mode is active, and both lights will pulsate in harmony at the same frequency and lighting mode.

Image 6.1: Multiple cyclists demonstrating the synchronized flashing of the handlebar end lights, highlighting team visibility.

6.4 Intelligent Sensing

The lights feature intelligent light and vibration sensing:

• Bremseføler: The lights automatically highlight when decelerating or braking, providing an instant warning to others.
• Lysregistrering: In dim surroundings, the lights will automatically illuminate.
• Vibration Sensing: The lights will enter a static sleep mode after 30 seconds of stillness and re-awaken upon detecting vibration. They will remain off during daylight hours when no movement is detected.

7. Vedligeholdelse

Korrekt vedligeholdelse sikrer dine lampers levetid og ydeevne.

• Rensning: Tør lysene af med en blød kludamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Vandtætning: The lights are IPX6 waterproof. Always ensure the dust-proof plug for the charging port is securely fastened when not charging to maintain water resistance. Do not submerge the lights in water.
• Batteripleje: For optimal battery life, charge the lights regularly and avoid complete discharge. If storing for an extended period, charge the battery to about 50% every few months.

Image 7.1: A close-up of the light with water droplets, illustrating its IPX6 waterproof design.

8. Fejlfinding

If you encounter issues with your ROCKBROS Bike Handlebar End Plugs Light, refer to the following common solutions:

• Lyset tænder ikke: Sørg for, at batteriet er opladet. Tryk på tænd/sluk-knappen og hold den nede i 2 sekunder.
• Lights not syncing: Ensure both lights are powered on. Double-tap the button on one light to initiate sync mode. Make sure they are within close proximity.
• Kort batterilevetid: Ensure the lights are fully charged. Check if they are accidentally left on in a mode with higher power consumption. Verify the intelligent sensing is functioning correctly to prevent unnecessary power drain.
• Light falling off handlebar: Re-check the installation steps. Ensure the light is twisted to expand and fit snugly, and any securing screws are tightened. Consider adding a small amount of friction tape inside the handlebar if the fit is still loose.
• Bremseføleren virker ikke: Ensure the light is firmly mounted and not loose, as movement can interfere with the sensor.

Hvis problemerne fortsætter, kontakt kundesupport for yderligere hjælp.

9. Specifikationer

10. Garanti og support

ROCKBROS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ROCKBROS webwebsted. Gem din købsbevis til garantikrav.