AIWA APX-1200BT Professional Turntable User Manual

Indledning

Tak for købetasing the AIWA APX-1200BT Professional Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

The AIWA APX-1200BT is designed for high-fidelity audio reproduction from vinyl records, featuring modern connectivity options such as Bluetooth 5.1 and USB for PC recording. Its robust construction and precision components ensure a superior listening experience.

Sikkerhedsoplysninger

Please observe the following safety precautions to prevent damage to the unit or injury to yourself:

• Udsæt ikke enheden for regn, fugt eller ekstreme temperaturer.
• Undgå at placere enheden i nærheden af ​​varmekilder eller i direkte sollys.
• Sørg for korrekt ventilation omkring enheden.
• Åbn ikke c'enasing. Overlad al service til kvalificeret personale.
• Håndter pennen med forsigtighed for at forhindre beskadigelse.
• Tag altid stikket ud af stikkontakten, inden du rengør eller flytter enheden.

Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i pakken:

• AIWA APX-1200BT Turntable Unit
• Støvdæksel
• Hinges (for dust cover)
• Platter
• slipmat
• Modvægt
• 45 omdr./min. Adapter
• AC-adapter (strømforsyning)
• Lydkabel (RCA)
• Brugervejledning (dette dokument)

Image: The AIWA APX-1200BT turntable with its dust cover open, showcasing the platter, tonearm, and controls.

Opsætning

1. Udpakning og placering

• Fjern forsigtigt alle komponenter fra emballagen.
• Place the turntable on a stable, level surface away from vibrations, direct sunlight, and heat sources.

2. Montering af tallerken og bælte

1. Placer aluminiumspladen på spindlen.
2. Locate the drive belt (usually pre-installed on the underside of the platter or included separately).
3. Carefully stretch the belt around the motor pulley.
4. Placer slipmatten oven på fadet.

Image: A hand is shown carefully placing a component onto the turntable's aluminum platter, illustrating part of the assembly process.

3. Dust Cover and Hinges

• Attach the hinges to the rear of the turntable chassis.
• Sæt støvdækslet ind i hængslerne.

4. Opsætning af tonearm og patron

1. Remove the stylus protector from the Audio-Technica AT-3600L cartridge.
2. Fastgør modvægten på bagsiden af ​​tonearmen.
3. Adjust the counterweight until the tonearm is balanced and floats horizontally.
4. Rotate the counterweight to set the recommended tracking force (refer to cartridge specifications, typically 2.5-3.5 grams for AT-3600L).
5. Set the anti-skate dial to a value corresponding to the tracking force.

Billede: En detaljeret view of the turntable's S-shaped tonearm, cartridge, and various control knobs, highlighting the precision components.

5. Lydforbindelser

• Connect the RCA audio cable from the turntable's output to your amplifier eller drevne højttalere.
• Hvis din amplifier has a dedicated PHONO input, set the turntable's PHONO/LINE switch to FONO.
• Hvis din amplifier has a LINE/AUX input, set the turntable's PHONO/LINE switch to LINE (utilizing the integrated preamplivligere).
• Connect the ground wire (if present) from the turntable to your amplifier's ground terminal to reduce hum.

Image: The rear panel of the AIWA APX-1200BT turntable, displaying the various audio output and power connection ports.

Image: An icon indicating the 'PRE AMP PHONO' feature, highlighting the integrated preamplivligere.

6. Strømtilslutning

• Connect the AC adapter to the turntable's power input and then to a wall outlet.

Betjeningsvejledning

1. Afspilning af en plade

1. Place a record on the platter, ensuring it is centered. For 7-inch singles, use the included 45 RPM adapter.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector button. The stroboscopic indicator lights will help confirm the correct speed.
3. Tryk på START/STOP-knappen for at starte tallerkenrotationen.
4. Gently lift the tonearm using the cueing lever and position the stylus over the desired track.
5. Lower the cueing lever to slowly drop the stylus onto the record.
6. At the end of the record, lift the tonearm using the cueing lever and return it to the tonearm rest. Press START/STOP to halt platter rotation.

2. Adjusting Pitch

• Use the pitch control slider to fine-tune the playback speed. The stroboscopic dots on the platter edge will appear stationary when the speed is accurate.

3. Bluetooth-parring

• Sørg for, at din Bluetooth-højttaler eller hovedtelefoner er i parringstilstand.
• Press and hold the Bluetooth pairing button on the turntable (refer to the control panel diagram in the product overview for exact location). The Bluetooth indicator light will flash.
• Once connected, the indicator light will remain solid. Audio will now stream wirelessly to your paired device.

Image: The Bluetooth logo, indicating the wireless connectivity feature of the turntable.

4. USB Recording to PC

• Connect the turntable to your computer using a USB cable (not included).
• Install audio recording software on your PC (e.g., Audacity, available online).
• Select the turntable as the input device in your recording software settings.
• Start playback on the turntable and begin recording in your software.
• Gem din digitaliserede lyd files i dit foretrukne format.

Opretholdelse

1. Rengøring af pennen

• Always clean the stylus from back to front using a soft brush or specialized stylus cleaning fluid.
• Undgå at berøre pennen med fingrene.

2. Rengøring af drejeskiven

• Wipe the dust cover and chassis with a soft, dry cloth. For stubborn marks, use a slightly damp klud og tør straks.
• Brug ikke hårde kemikalier eller slibende rengøringsmidler.

3. Udskiftning af pen

• The stylus (needle) is a consumable part and should be replaced after approximately 300-500 hours of playback, or if sound quality degrades.
• Refer to the cartridge manufacturer's instructions for specific replacement procedures (Audio-Technica AT-3600L).

Fejlfinding

Specifikationer

Garanti og support

Garantioplysninger

The AIWA APX-1200BT Turntable comes with a to års producentgaranti from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear of consumable parts like the stylus.

Gem venligst dit købsbevis for garantikrav.

Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact your retailer or the official Aiwa customer support. Contact details can typically be found on the Aiwa webwebstedet eller din købsdokumentation.

When contacting support, please have your product model number (APX-1200BT) and proof of purchase readily available.