1. Introduktion
Thank you for choosing the BONTEC Single Monitor Stand. This adjustable gas spring arm monitor desk mount is designed to enhance your workspace ergonomics and free up valuable desk space. It is compatible with 15-32 inch screens and supports VESA 75x75mm and 100x100mm patterns. This manual provides detailed instructions for safe installation, operation, and maintenance of your monitor stand.
2. Sikkerhedsoplysninger
Please read all instructions carefully before assembly and use. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. Improper installation may cause damage or serious injury.
- Overskrid ikke den maksimale vægtkapacitet på 9 kg.
- Ensure the mounting surface (desk) is strong enough to support the combined weight of the stand and your monitor.
- Spænd ikke skruerne for meget. Overspænding kan forårsage skade på dit udstyr.
- Hold børn og kæledyr væk under installationen.
- Always use the provided tools and hardware.
- Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er fastgjort.
3. Pakkens indhold
Verify that all components are present and undamaged. If any parts are missing or damaged, please contact BONTEC customer service.
| Komponent | Beskrivelse | Mængde |
|---|---|---|
| Skærmarmsamling | Main gas spring arm and VESA plate | 1 |
| C-Clamp Grundlag | For desk edge mounting | 1 |
| Grommets base | For through-desk hole mounting | 1 |
| Hardwarekit | Screws, washers, spacers, Allen keys | 1 sæt |
| Kabelhåndteringsklip | For organizing cables along the arm | Inkluderet |
4. Opsætning og installation
The BONTEC Single Monitor Stand offers two installation methods: C-Clamp mounting and Grommet mounting. Choose the method that best suits your desk setup.
4.1 Skrivebordskompatibilitet
- Skrivebords tykkelse: 0.39" to 3.15" (10mm to 80mm) for both C-Clamp og montering af gummiringen.
- Grommet Hole Diameter: 0.4" to 2.4" (10mm to 60mm) for Grommet mounting.
4.2 VESA-kompatibilitet
This monitor stand supports VESA mounting patterns of 75x75mm and 100x100mm. Ensure your monitor has one of these patterns before proceeding.
Image: The BONTEC Single Monitor Stand showcasing both C-Clamp og muligheder for montering af grommet.
Image: Detailed illustration of the C-Clamp and Grommet mounting options, including supported desk thicknesses.
4.3 Installationstrin (generelt overview)
- Assemble the chosen desk mounting base (C-Clamp or Grommet) to the main pole.
- Secure the pole to your desk according to the chosen mounting method.
- Attach the VESA plate to the back of your monitor using the appropriate screws.
- Slide the monitor with the attached VESA plate onto the monitor arm.
- Adjust the gas spring tension to match your monitor's weight (refer to Operating Instructions).
- Utilize the snap-in cable management system to route and hide cables for a clean workspace.
Image: The monitor arm demonstrating its innovative snap-in cable management system, keeping cables organized and out of sight.
4.4 Installationsvideoguide
Video: Official BONTEC Single Monitor Stand installation and feature overview. This video demonstrates the assembly process and highlights key features of the monitor arm.
5. Betjeningsvejledning og justeringer
The BONTEC monitor stand offers full motion adjustability to achieve optimal viewvinkler og ergonomisk placering.
5.1 Range of Motion
- Vip: ±90° (up/down)
- Drejelig: ±90° (venstre/højre)
- Rotation: 360° (portrait to landscape)
- Max forlængelse: 21.3 tommer
- Max højde: 17.7 tommer
Image: Visual representation of the monitor arm's flexible viewing experience, detailing tilt, swivel, and 360-degree rotation capabilities.
Image: Illustration highlighting the built-in gas spring support, ensuring smooth and stable adjustments.
5.2 Justering af gasfjederspænding
The gas spring tension needs to be adjusted to match the weight of your monitor for optimal movement and stability. Use the provided Allen key.
- If the monitor droops or falls, turn the tension screw mod uret at øge spændingen.
- If the monitor rises too easily or is difficult to push down, turn the tension screw med uret to reduce tension.
- Adjust gradually, testing the arm's movement after each turn. Do not exceed 8 turns in either direction from the initial setting.
5.3 Tilt and Swivel Adjustment
If the monitor tilt or swivel is too loose or too stiff, use the appropriate Allen key to adjust the screws on the U-shaped joint head. Turn clockwise to tighten, counter-clockwise to loosen.
5.4 Videovejledning til justering
Video: Important tips for adjusting the tilt, swivel, and gas spring tension of the monitor arm to ensure smooth and stable operation.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din skærmstanders levetid og optimale ydeevne.
- Rensning: Tør stativet af med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
- Inspektion: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er stramme og sikre. Spænd igen om nødvendigt.
- Gasfjeder: The gas spring is designed for long-term use (30,000 cycles tested) and generally requires no maintenance. However, if you notice significant changes in its performance, refer to the tension adjustment section.
7. Fejlfinding
Hvis du støder på problemer med din skærmstander, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Monitor droops or falls | Gasfjederens spænding er for lav til skærmens vægt. | Increase gas spring tension by turning the screw counter-clockwise (Max 8 turns). Refer to Section 5.2. |
| Monitor rises too easily or is hard to push down | Gasfjederens spænding er for høj til skærmens vægt. | Decrease gas spring tension by turning the screw clockwise (Max 8 turns). Refer to Section 5.2. |
| Monitor tilt/swivel is loose | Tilt/swivel joint screw is loose. | Tighten the tilt/swivel joint screw clockwise using the appropriate Allen key. Refer to Section 5.3. |
| Monitor arm feels unstable | Skrivebord clamp/grommet base is not securely tightened. | Ensure the C-Clamp or Grommet base is securely fastened to the desk. Check all connection points. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | GDM7501-v02-FBA |
| Kompatibel skærmstørrelse | 15-32 tommer |
| Vægt kapacitet | Op til 19.8 lbs (9 kg) |
| VESA-kompatibilitet | 75x75mm, 100x100mm |
| Monteringsmuligheder | C-Clamp, Grommet Base |
| Skrivebordstykkelse (C-Clamp/Grommet) | 0.39" - 3.15" (10 mm - 80 mm) |
| Diameter på maljehul | 0.4" - 2.4" (10 mm - 60 mm) |
| Tilt rækkevidde | ±90° |
| Drejningsområde | ±90° |
| Rotation | 360° |
| Max forlængelse | 21.3 tommer |
| Maks højde | 17.7 tommer |
| Materiale | Aluminum, Metal (Zinc) |
| Farve | Sort |
9. Garanti og support
BONTEC products are manufactured with high-quality materials and undergo rigorous testing to ensure durability and performance. For warranty information, technical support, or any questions regarding your product, please contact BONTEC customer service through the retailer where you purchased the product or visit the official BONTEC webwebsted.
Kontaktoplysninger: Please refer to your purchase documentation or the BONTEC official webhjemmeside for de mest opdaterede kontaktoplysninger.