Piegricdiat Q26S Invisible Sleep Headphones User Manual

Indledning

This manual provides detailed instructions for the Piegricdiat Q26S Invisible Sleep Headphones. Designed for comfort and discreet use, these Bluetooth 5.3 wireless earbuds offer a comfortable audio experience, especially for side sleepers, with noise-blocking capabilities and IPX6 water resistance.

1. Pakkens indhold

Upon opening your Piegricdiat Q26S Invisible Sleep Headphones package, you should find the following items:

• Piegricdiat Q26S Invisible Sleep Earbuds (Left and Right)
• Opladningsetui
• USB opladningskabel
• Brugermanual

Figure 1: Piegricdiat Q26S earbuds inside their charging case, displaying charge indicator lights.

2. Opsætningsvejledning

2.1 Opladning af øretelefoner og etuiet

Before initial use, fully charge the earbuds and the charging case. The charging case uses a USB-C port for charging.

1. Placer begge ørepropper i opladningsetuiet. Sørg for, at de er korrekt isat.
2. Tilslut det medfølgende USB-opladerkabel til opladningsporten på etuiet og til en kompatibel USB-strømkilde.
3. The indicator lights on the charging case will illuminate to show the charging status. The earbuds will also show a light (typically green) when charging.
4. Once fully charged, the indicator lights will change or turn off.

Figure 2: The charging case with earbuds inserted. The case features indicator lights to show battery status.

2.2 Bluetooth -parring

Follow these steps to pair your Piegricdiat Q26S earbuds with your device:

1. Sørg for, at øretelefonerne er opladet.
2. Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing light (typically green).
3. Gå til Bluetooth-indstillingerne på din smartphone eller Bluetooth-aktiverede enhed.
4. Søg efter available devices and select "Q26S" from the list.
5. Once connected, the earbud light will flash slowly or turn off, and you may hear a voice prompt confirming the connection.

Note: If the earbuds do not pair automatically, remove both earbuds from the charging case. Press and hold the button on each earbud for approximately 5 seconds until the green lights flash rapidly. Then, place them back into the charging case. After charging, remove both earbuds simultaneously. Press the button on each earbud once. The earbuds will automatically pair with each other. One earbud's green light will flash rapidly, while the other will flash slowly. Activate the Bluetooth on your phone and search for "Q26S" to connect.

3. Betjeningsvejledning

3.1 Sådan tager du ørepropperne på

The Piegricdiat Q26S earbuds are designed for a comfortable and secure fit, especially for side sleepers. Gently insert each earbud into your ear canal, ensuring the soft silicone eartips and eartip caps provide a snug fit. Adjust for optimal comfort and sound isolation.

Figure 3: Earbuds designed for comfort, particularly for side sleepers.

Figure 4: The compact design of the earbud ensures a discreet and comfortable fit.

3.2 Tryk på kontrolelementer

The earbuds feature touch-sensitive controls for managing music playback and calls:

3.3 Switching to Sleep Mode

When connected to your phone, tap the left or right earbud button 3 times to switch to sleep mode. You will hear a prompt "sleeping mode." In sleep mode, no beeps or breathing lights are allowed to ensure an undisturbed experience.

Figure 5: Earbuds provide a snug fit to naturally block out noise for peaceful sleep.

4. Vedligeholdelse og pleje

4.1 Rengøring

For at opretholde optimal ydeevne og hygiejne skal du regelmæssigt rengøre dine ørepropper og opladningsetuiet:

• Tør forsigtigt ørepropperne og opladningsetuiet af med en blød, tør og fnugfri klud.
• If the silicone eartips are removable, detach them and clean with mild soap and water, then dry thoroughly before reattaching.
• Ensure the charging contact points on both the earbuds and inside the case are clean and free of debris to ensure proper charging.

4.2 Vandtæthed (IPX6)

The Piegricdiat Q26S earbuds are rated IPX6 waterproof, meaning they are protected against high-pressure water jets from any direction. This makes them suitable for use during activities where they might be exposed to sweat or rain. However, they are not designed for prolonged submersion or high-pressure water activities like diving.

Figure 6: IPX6 water resistance protects earbuds from sweat and rain.

5. Fejlfinding

If you encounter issues with your Piegricdiat Q26S earbuds, refer to the following common solutions:

• Ørepropper parrer eller opretter ikke forbindelse:
  • Sørg for, at begge øretelefoner er fuldt opladede.
  • Place earbuds back into the charging case, close the lid, then open it again to re-initiate pairing mode.
  • On your device, forget the "Q26S" Bluetooth connection and attempt to pair again.
  • If issues persist, try resetting the earbuds by following the manual pairing instructions (Section 2.2).
• Ingen lyd eller lav lydstyrke:
  • Kontroller lydstyrkeniveauerne på både din tilsluttede enhed og ørepropperne.
  • Ensure the earbuds are properly seated in your ears for optimal sound delivery and noise isolation.
  • Kontroller, at ørepropperne er tilsluttet den korrekte enhed.
• Intermitterende forbindelse eller lydudfald:
  • Ensure your device is within the effective Bluetooth range (typically 10 meters/33 feet) and there are no significant obstructions.
  • Minimér interferens fra andre trådløse enheder.
  • Fully charge the earbuds and the charging case.
• Øretelefoner oplader ikke:
  • Sørg for, at opladningskablet er korrekt tilsluttet til både etuiet og strømkilden.
  • Kontroller, at opladningskontakterne på ørepropperne og inde i etuiet er rene og fri for snavs.
  • Prøv at bruge et andet USB-opladerkabel eller en anden strømadapter.

6. Specifikationer

7. Garanti og support

Piegricdiat products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included in your product packaging or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.

Kundesupport

If you require further assistance or have questions not covered in this manual, please contact Piegricdiat customer support through the retailer's platform or the official brand website. When contacting support, please have your product model (Q26S) and purchase information ready.