YL81F

EBike LCD Display Meter YL81F User Manual

Model: YL81F | Brand: Generic

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your YL81F EBike LCD Display Meter. The YL81F display is designed to enhance your electric bicycle riding experience by providing essential information and control functions.

It features a colorful LCD screen offering a wide range of functions including speed display, mileage tracking, battery level indication, and personalized parameter settings. Please read this manual thoroughly before use to ensure proper installation and optimal performance.

Sikkerhedsoplysninger

Always ensure your e-bike is powered off before installing or removing the display.
Do not attempt to disassemble or modify the display unit. This may void the warranty and cause damage.
Hold skærmen væk fra ekstreme temperaturer, direkte sollys i længere perioder og ætsende stoffer.
Ensure all connections are secure and waterproof (if applicable) to prevent electrical shorts or damage from moisture.
Regularly check the display's mounting for stability to prevent it from detaching during rides.
Do not operate the display while riding if it distracts you from safe operation of the e-bike.

Produkt overview

The YL81F LCD Display Meter consists of the main display unit and a control button panel, designed for handlebar mounting. It provides a clear, colorful interface for monitoring your e-bike's performance.

YL81F EBike LCD Display Meter with control panel and connecting cable

Image: YL81F EBike LCD Display Meter, showing the main display unit, the handlebar-mounted control button panel, and the connecting cable with its SM connector.

Nøglekomponenter:

LCD skærm: Colorful interface for data visualization.
Control Button Panel: Til navigering i menuer og justering af indstillinger.
Monteringsbeslag: Flexible bracket for handlebar sizes 22.2 mm, 25.4 mm, and 31.8 mm.
5-pin SM Connector Cable: For connecting to the e-bike's controller.
USB Charging Port (on K6 button): Provides power protection for mobile phones.

Opsætning og installation

Follow these steps to properly install your YL81F LCD Display Meter on your e-bike.

Klargør styret: Choose a suitable position on your e-bike's handlebar for the display and control panel. Ensure there is enough space and that it does not obstruct your view eller kontrol over cyklen.
Monter skærmen: Use the provided mounting bracket to secure the YL81F display unit to the handlebar. The flexible bracket is compatible with handlebar sizes of 22.2 mm, 25.4 mm, and 31.8 mm. Tighten securely but do not overtighten.
Monter kontrolpanelet: Attach the control button panel to a comfortable and accessible position on the handlebar, typically near your thumb.
Tilslut kablerne:
- Locate the 5-pin SM male connector cable from the display unit.
- Connect this cable to the corresponding female connector on your e-bike's controller or wiring harness. Ensure the connection is firm and secure.
- If your e-bike uses a different communication protocol, please contact customer service with your old monitor's serial number to ensure compatibility and a plug-and-play experience.
Tænd og test: Once all connections are made, power on your e-bike. The display should light up. Verify that all basic functions (e.g., speed, battery level) are displayed correctly.
Kompatibilitetsnote: The YL81F display is compatible with 24V, 36V, 48V, and 60V e-bike battery systems.

Betjeningsvejledning

The YL81F display offers a variety of functions accessible through its intuitive interface and control buttons.

Displayfunktioner:

Display på batteriniveau: Shows the current charge status of your e-bike battery.
Hastighedsvisning: Includes real-time speed, maximum speed, and average speed.
Kilometervisning: Tracks single trip mileage and total mileage.
Boost Gear Adjustment and Indication: Allows selection and display of assist levels.
Boost Push Control and Indication: For walk-assist mode.
Headlight Control and Indication: To turn e-bike lights on/off.
Visning af fejlkode: Angiver systemfejl med specifikke koder.
Cruise Control and Indication (Optional): If enabled and supported by your e-bike system.
Personlige parameterindstillinger: Adjust settings such as wheel diameter, speed limit, and other bike parameters.
Factory Default Parameter Restoration: Option to reset settings to original factory values.

Brug af kontrolknapperne:

Specific button functions may vary slightly based on firmware version. Generally, buttons are used for:

Tænd/sluk: Tryk længe på tænd/sluk-knappen.
Modeskift: Short press a mode button to cycle through display modes (e.g., Trip, ODO, MAX Speed, AVG Speed).
Justering af assistanceniveau: Use '+' and '-' buttons to increase or decrease pedal assist levels.
Setting Access: Long press specific buttons (refer to on-screen prompts) to enter parameter settings menu.
USB-opladning: The K6 button on the display has a USB interface for charging compatible devices.

For detailed navigation and parameter adjustment, refer to the on-screen prompts and specific instructions provided by your e-bike manufacturer if integrated.

Opretholdelse

Rensning: Tør skærmen og kabinettet af med en blød kludamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Tilslutningskontrol: Kontrollér regelmæssigt alle kabelforbindelser for at sikre, at de er fastgjorte og fri for korrosion eller beskadigelse.
Opbevaring: Hvis du opbevarer din elcykel i længere tid, skal du sørge for, at displayet er rent og opbevares tørt og tempereret.
Undgå påvirkning: While the display is constructed with rugged ABS and tempered glass, avoid dropping or subjecting it to strong impacts.

Fejlfinding

Problem	Mulig årsag	Løsning
Skærmen tændes ikke.	No power from battery; loose connection; faulty display.	Check e-bike battery charge. Verify all cable connections are secure. If problem persists, contact customer service.
Displayet viser fejlkode.	System malfunction detected by the e-bike controller.	Note the error code and consult your e-bike's main manual or contact customer service for specific code meanings and solutions.
Speed/Mileage not accurate.	Incorrect wheel diameter setting; faulty speed sensor.	Access personalized parameter settings to verify and adjust the wheel diameter. Check speed sensor connection and function.
Display is difficult to read in sunlight.	High glare conditions; display brightness setting.	Adjust display angle if possible. Check if there's a brightness setting in the display's menu. (Note: Some LCDs may have inherent limitations in direct sunlight).

Hvis du støder på problemer, der ikke er nævnt her, eller hvis løsningerne ikke løser problemet, bedes du kontakte kundesupport.

Specifikationer

Modelnavn	YL81F
Mærke	Generic (Manufacturer: Yolin)
Display Type	LCD, Colorful Screen
Forbindelse	Wired, 5-pin SM connector
Voltage Kompatibilitet	24V, 36V, 48V, 60V
Monteringstype	Styrmontering
Handlebar Diameter Compatibility	22.2 mm, 25.4 mm, 31.8 mm
Materiale	ABS housing, LCD screen, Tempered Glass, Nylon bracket
Inkluderede komponenter	Display Unit, Mounting Bracket
Human Interface Input	Knapper
Pakkevægt	219 gram
Pakkedimensioner (L x B x H)	4.72 x 3.94 x 3.54 tommer

Garanti og support

The YL81F LCD Display Meter comes with a 1 års fabriksgaranti.

For technical support, warranty claims, or inquiries regarding specific communication protocols and customized functions (e.g., cruise control), please contact the online customer service of the seller. When contacting support, it is helpful to provide the serial number located on the back of your old monitor (if replacing) or the product's purchase details.

Ensure you pay attention to messages from the seller after purchase, as they may contact you to confirm compatibility for a plug-and-play experience.