1. Produktet er slutview
The Satco S11520 ST19 LED bulb combines classic design with modern energy efficiency. This 6-watt LED bulb is designed to replace a traditional 40-watt incandescent bulb, providing 500 lumens of warm 2700K illumination. Its vintage ST19 shape, clear glass housing, and flex gray coil filament offer a decorative aesthetic suitable for various fixtures. The bulb features a standard medium E26 base, is fully dimmable on 120V circuits, and is rated for use in enclosed fixtures and wet locations.
Figur 1: Forside view of the Satco S11520 ST19 LED Bulb, showcasing its clear glass and flex gray coil filament.
Nøglefunktioner:
- Vintage Design: ST19 shape with clear glass and gray flex coil filament for a classic aesthetic.
- Energieffektiv: 6W LED replaces 40W incandescent, delivering 500 lumens.
- Varmt hvidt lys: 2700K color temperature for a comfortable and inviting glow.
- Dæmpbar: Compatible with most standard 120V dimmer switches for adjustable light levels.
- Høj farvegengivelse: CRI of 93+ ensures accurate and vibrant color representation.
- Bred kompatibilitet: Medium E26 base fits most standard household fixtures.
- Holdbar: Rated for 15,000 hours of operation and suitable for enclosed fixtures and wet locations.
2. Sikkerhedsoplysninger
Læs og forstå alle sikkerhedsinstruktioner, før du installerer eller bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.
- Sluk: Always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
- Proper Voltage: Sørg for, at forsyningen voltage is 120V AC, 60Hz. This bulb is designed for 120V circuits only.
- Armaturkompatibilitet: Use only in fixtures designed for light bulbs with a medium E26 base.
- Vægt: Do not exceed the weight limit of the fixture. This bulb weighs approximately 2.72 ounces.
- Håndtering: Handle the bulb by its base, not the glass, to avoid breakage or damage.
- Temperatur: Do not use in environments where the operating temperature exceeds the bulb's rating (-4°F to +113°F / -20°C to +45°C).
- Bortskaffelse: Bortskaf brugte pærer i henhold til lokale regler.
- Lysdæmpere: When using with a dimmer, ensure the dimmer is compatible with LED bulbs. Incompatible dimmers may cause flickering or damage to the bulb.
3. Installation
Follow these steps to safely install your Satco S11520 LED bulb:
- Sluk for strømmen: Before beginning, ensure the power to the light fixture is completely turned off at the circuit breaker or wall switch.
- Fjern gammel pære: Skru forsigtigt den eksisterende pære af armaturet. Lad den køle af, hvis den har været i brug for nylig.
- Inspekter armatur: Check the fixture for any damage or loose wiring. Ensure the socket is clean and dry.
- Installer ny pære: Gently screw the Satco S11520 LED bulb into the E26 medium base socket until it is snug. Do not overtighten.
- Gendan strøm: Tænd for strømmen igen på afbryderen eller vægkontakten.
- Prøve: Tænd lyskontakten for at bekræfte, at pæren fungerer korrekt.
Figure 2: Dimensions of the Satco S11520 ST19 LED Bulb, showing its E26 medium base.
This bulb is suitable for use in enclosed fixtures and wet locations, offering versatility for various indoor and covered outdoor applications.
4. Betjeningsvejledning
The Satco S11520 LED bulb operates like a standard light bulb but offers dimming capabilities and energy efficiency.
- Tænd/sluk: Brug din eksisterende vægkontakt til at tænde eller slukke lyset.
- Dæmpningsfunktion: If connected to a compatible LED dimmer switch, adjust the dimmer control to achieve your desired brightness level. The bulb supports smooth dimming down to soft accent levels.
- Lysoutput: This bulb provides 360° omnidirectional lighting, ensuring consistent and balanced illumination in your space.
5. Vedligeholdelse
The Satco S11520 LED bulb requires minimal maintenance due to its long lifespan.
- Rensning: Sørg for, at strømmen er slukket, inden rengøring. Brug en blød, tør klud til at tørre pæren af. Brug ikke flydende rengøringsmidler eller slibende materialer.
- Udskiftning: This LED bulb has an average life of 15,000 hours. When replacement is needed, follow the installation steps in Section 3.
6. Fejlfinding
If you encounter issues with your Satco S11520 LED bulb, refer to the following common troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Pæren lyser ikke. | Ingen strøm til armaturet, løs forbindelse eller defekt pære. |
|
| Pæren flimrer eller brummer. | Inkompatibel lysdæmper eller ustabil strømforsyning. |
|
| Lysudgangen er for svag eller for lys. | Dæmperindstilling eller forkert pære til anvendelse. |
|
If the problem persists after trying these steps, please contact Satco customer support.
7. Specifikationer
Detailed technical specifications for the Satco S11520 ST19 LED Bulb:
| Attribut | Værdi |
|---|---|
| Modelnummer | S11520 |
| Mærke | Satco |
| Pære type | LED |
| Pære form størrelse | ST19 |
| Wattage | 6 watt |
| Glødelignende ækvivalent | 40 watt |
| Lysstyrke | 500 lumen |
| Farvetemperatur | 2700 Kelvin (varm hvid) |
| Color Rendering Index (CRI) | 93+ |
| Base Type | E26 (medium) |
| Voltage | 120V AC |
| Dæmpbar | Ja |
| Strålevinkel | 360° omnidirektionel |
| Gennemsnitligt liv | 15,000 timer |
| Driftstemperatur | -4°F til +113°F (-20°C til +45°C) |
| Placeringsvurdering | Wet Location Rated, Enclosed Fixture Rated |
| Dimensioner (L x D) | 5.31" x 2.28" (134.87 mm x 57.91 mm) |
| Varens vægt | 2.72 ounce |
| UPC | 045923115202 |
Figure 3: Product packaging displaying key specifications for the Satco S11520 ST19 LED Bulb.
Figure 4: Lighting Facts label, detailing brightness, energy cost, life, and light appearance for the Satco S11520 ST19 LED Bulb.
8. Garanti og support
The Satco S11520 LED bulb is backed by a 3 års begrænset garantiDenne garanti dækker materiale- og fabrikationsfejl under normal brug og service.
For warranty claims, technical assistance, or any questions regarding your product, please contact Satco customer support. Keep your proof of purchase for warranty validation.
Satco Customer Support:
- Refer to the official Satco webwebsted for kontaktoplysninger.
- Provide the model number (S11520) when contacting support.