SRAM XS-1270 Eagle Cassette 10-52t Instruction Manual

1. Introduktion

The SRAM XS-1270 Eagle Cassette is a high-performance 12-speed drivetrain component designed for mountain biking, including aggressive trail riding, enduro, and e-MTB applications. It offers a wide gear range from 10 to 52 teeth, enabling riders to conquer varied terrain and steep climbs efficiently. Crafted from durable steel cogs with a black nickel chrome finish, this cassette ensures longevity and corrosion resistance.

Key features include SRAM's X-SYNC full design for precise shifting under load, a 55mm chainline for reduced wear, and compatibility with standard HG freehub bodies (8-10 speed). This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your SRAM XS-1270 Eagle Cassette.

Figure 1: The SRAM XS-1270 Eagle Cassette, showcasing its durable construction and wide gear range.

2. Installation

Proper installation is crucial for optimal performance and safety. If you are unsure about any step, consult a professional bicycle mechanic.

1. Forbered hjulet: Ensure your wheel's freehub body is clean and free of debris. The XS-1270 cassette is compatible with standard HG freehub bodies (8-10 speed).
2. Install the Cassette: Slide the cassette onto the freehub body. The splines on the cassette and freehub body are designed to align in only one orientation. Ensure all cogs are seated correctly.
3. Secure with Lockring: Place the cassette lockring over the cassette and thread it onto the freehub body.
4. Torque the Lockring: Using a cassette lockring tool and a torque wrench, tighten the lockring to the manufacturer's specified torque. Refer to your wheel or hub manufacturer's specifications, typically around 40 Nm (29 ft-lb). Overtightening or undertightening can lead to damage or poor shifting performance.
5. Tjek for afspilning: After tightening, ensure there is no lateral play in the cassette.

Note: The XS-1270 cassette integrates a replaceable gear cluster for 8-12 teeth. This component should be installed or replaced by following specific SRAM service instructions.

3. Operation and Compatibility

The SRAM XS-1270 Eagle Cassette is designed for seamless integration with SRAM Eagle 12-speed drivetrains. Its wide 10-52 tooth range provides optimal gearing for various riding conditions.

• Skifteydelse: The X-SYNC full design ensures crisp and reliable shifting under load. Always shift smoothly and avoid excessive force.
• Kædelinje: The 55mm chainline is optimized for moderate chain angles, contributing to reduced wear and improved shifting accuracy.
• Kompatibilitet:
  • Compatible with SRAM Eagle 12-speed chains and derailleurs.
  • Designed for standard HG freehub bodies (8-10 speed).
  • Suitable for both aluminum and steel driver bodies.
  • Ideal for MTB and E-MTB applications.

For best performance, ensure your derailleur is properly adjusted and your chain is in good condition.

4. Vedligeholdelse

Regular maintenance extends the life of your cassette and ensures consistent performance.

• Rensning: After each ride, especially in wet or dirty conditions, clean the cassette thoroughly. Use a stiff brush and a degreaser specifically designed for bicycle drivetrains. Rinse with water and dry completely.
• Smøring: While the cassette itself does not require lubrication, ensure your chain is regularly cleaned and lubricated according to its manufacturer's recommendations. A well-lubricated chain reduces wear on the cassette.
• Inspektion: Periodically inspect the cassette cogs for signs of wear, such as hooked teeth or excessive thinning. Worn cogs can lead to poor shifting and premature chain wear.
• Udskiftning af kæde: Replace your chain regularly. A worn chain will accelerate wear on your cassette and chainrings. Use a chain wear indicator tool to determine when replacement is necessary.
• Replaceable Gear Cluster: The 8-12 teeth gear cluster is replaceable. If this section shows significant wear, consult a SRAM service manual or a professional mechanic for replacement.

5. Fejlfinding

Here are some common issues and potential solutions for your SRAM XS-1270 Eagle Cassette.

If these solutions do not resolve the issue, consult a professional bicycle mechanic.

6. Specifikationer

• Modelnavn: SRAM XS-1270 Eagle Cassette
• Modelnummer: 00.2418.141.001
• Gearområde: 10-52 teeth
• Hastigheder: 12-trins
• Materiale: Steel cogs with black nickel chrome finish
• Vægt: Approximately 10.7 ounces (303 grams) - Note: Product description states 565 grams, but specifications state 10.7 ounces which is approximately 303 grams.
• Kædelinje: 55 mm
• Freehub Compatibility: Standard HG freehub bodies (8-10 speed)
• Driver Body Compatibility: Aluminum and steel driver bodies
• Dimensioner: 17 x 12 x 5.5 inches (Product packaging dimensions)
• Ansøgninger: Mountain Biking (Trail, Enduro, E-MTB)

7. Garanti og support

SRAM products are designed for performance and durability. For specific warranty information, please refer to the official SRAM website or contact SRAM customer support directly. Warranty terms typically cover manufacturing defects and material flaws under normal use.

For technical assistance, spare parts, or service inquiries, please visit the official SRAM support portal or contact your authorized SRAM dealer. Always use genuine SRAM replacement parts for optimal performance and safety.

SRAM Official Webwebsted: www.sram.com