Temank MPPT 60A Solar Charge Controller User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Temank MPPT 60A Solar Charge Controller. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Nøglefunktioner

• Maximum 12 Units in Parallel: Expand your solar system's capacity and power output by connecting up to 12 units in parallel. This enhances reliability, stability, and simplifies system maintenance.
• Customizable Charging Current Limit: Supports various battery types (12V/24V/36V/48V lead-acid and lithium) with a configurable charging current range of 2A to 60A. Rated load output current is 25A.
• Effektiv varmeafledning: Features a die-cast aluminum construction and a turbofan for dual cooling, activating above 45°C and deactivating below 40°C for quiet and effective temperature management.
• Kompatibilitet med flere batterier: Negative grounding design compatible with Sealed, Gel, Flooded, LiFePO4, and Lithium-Ion batteries. User-programmable absorption voltage, flyder voltage, lav voltage cutoff, and load timer.
• Forbedret beskyttelse: Comprehensive protection against overcurrent, short circuit, reversed polarity, overvoltage, over-discharge, and over-temperature. Includes an external temperature probe for precise battery temperature monitoring.
• 99% Tracking Technology: Advanced Maximum Power Point Tracking (MPPT) technology ensures continuous tracking of the array's maximum power point for up to 99% tracking efficiency and 97% peak conversion efficiency.
• Aktivering af litiumbatteri: Activates lithium batteries using solar panel energy, with precautions to prevent overcharging. Note: Do not charge lithium batteries below 0°C.

3. Opsætning og installation

Korrekt installation er afgørende for sikker og effektiv drift af din solcelleladeregulator. Følg disse trin omhyggeligt.

3.1 Montering af controlleren

Mount the controller on a flat, stable surface, such as a wall, using appropriate fasteners. Ensure adequate ventilation around the unit for optimal heat dissipation.

Image: The Temank MPPT 60A Solar Charge Controller mounted on a wooden wall, showing its display and connection terminals. This image illustrates the physical mounting of the device.

3.2 Ledningsdiagram og tilslutninger

Follow the wiring diagram below for connecting the solar panels, battery, and load to the controller. Always ensure correct polarity and secure connections.

1. Tilslut batteriet: Connect the battery to the controller's battery terminals. Ensure correct polarity (positive to positive, negative to negative). It is recommended to connect a circuit breaker between the battery and the controller.
2. Tilslut solpanelerne: Connect the solar panels to the controller's PV input terminals. Ensure correct polarity. A circuit breaker should be installed between the solar panels and the controller.
3. Tilslut belastningen: Tilslut din DC-belastning til controllerens belastningsterminaler.
4. Parallel kommunikation (hvis relevant): If using multiple controllers in parallel, connect them using communication cables. Ensure to distinguish between parallel communication ports and temperature probe ports.
5. Temperaturprobe: Connect the temperature probe to the controller and secure the other end to the battery case for accurate temperature monitoring.

Image: A detailed diagram showing the connections for a solar power system with the Temank MPPT 60A Solar Charge Controller, including solar panels, battery, and inverter. It also illustrates parallel connection capabilities.

Image: A simplified 2-step connection diagram for the Temank MPPT 60A Solar Charge Controller, showing the sequence of connecting the battery and solar panels with circuit breakers.

3.3 Tænd for systemet

After all wiring is complete and checked for security and correct polarity, power on the system in the following sequence:

1. Switch on the battery breaker connected to the controller.
2. Tænd for PV-afbryderen.
3. If an inverter is used, switch on the inverter-side breaker.

Vigtig: Always connect the battery to the controller first before connecting solar panels or other components.

4. Betjeningsvejledning

The controller features an LCD display and buttons for easy operation and monitoring.

4.1 Skærmgrænseflade overview

The main screen displays three key sections: photovoltaic data, battery charging data, and load operation modes. Use the buttons to navigate through different parameters.

4.2 Indstilling af batteritype

The controller supports 14 predefined battery types. Select the appropriate type to ensure correct charging parameters. If your battery type is not listed, you can use the "USE" option for manual configuration.

• Sealed Lead-Acid Battery (SEL)
• Gel Sealed Lead-Acid Battery (GEL)
• Flooded Lead-Acid Battery (FLd)
• 4-Series LiFePO4 Battery (L04)
• 7-Series LiFePO4 Battery (L07)
• 8-Series LiFePO4 Battery (L08)
• 15-Series LiFePO4 Battery (L15)
• 16-Series LiFePO4 Battery (L16)
• 3-Series Lithium-Ion Battery (N03)
• 6-Series Lithium-Ion Battery (N06)
• 7-Series Lithium-Ion Battery (N07)
• 13-Series Lithium-Ion Battery (N13)
• 14-Series Lithium-Ion Battery (N14)
• User-Defined (USE)

Image: A visual representation of the various battery types compatible with the Temank MPPT 60A Solar Charge Controller, along with their corresponding display codes and a note about disconnecting PV input before setting parameters.

4.3 Indlæs driftstilstandsindstillinger

The controller offers various load operation modes:

• 24H: Load output is always on.
• 00H (Light Control Mode): The controller turns on the load output after sunset and turns it off after sunrise.
• 01H to 23H (Light Control + Time Control Mode): The controller turns on the load output after sunset for a specified duration (e.g., 01H for 1 hour, 02H for 2 hours, up to 23 hours).

4.4 Parallel Operation Setup

For systems with multiple controllers, parallel communication ensures synchronized charging programs. The controller with the lowest communication code acts as the master, and others as slaves.

Image: A schematic illustrating the parallel operation of multiple Temank MPPT 60A Solar Charge Controllers, showing communication cables and connections to solar arrays and a shared battery bank.

5. Vedligeholdelse

Regular maintenance ensures the longevity and efficiency of your solar charge controller.

• Undersøg forbindelser: Kontrollér regelmæssigt alle ledningsforbindelser for tæthed og korrosion.
• Rengør enheden: Keep the controller clean and free from dust and debris to ensure proper heat dissipation.
• Overvåg ydeevne: Kontrollér regelmæssigt displayet for fejlkoder eller usædvanlige aflæsninger.
• Batteriets sundhed: Overvåg batteri voltage and temperature to ensure they are within recommended ranges.

6. Fejlfinding

Hvis du støder på problemer, kan du se følgende almindelige fejlfindingstips:

• Controller Displays "Night Mode": If the solar controller displays night mode during daylight, ensure the PV input is properly connected and receiving sufficient sunlight. Perform a reset by disconnecting all power (PV and battery), then reconnecting only the battery, and holding the last button for more than 5 seconds to restore factory settings.
• Ingen opladning: Check all connections, especially solar panel and battery connections, for proper polarity and secure fit. Verify solar panel output voltage.
• Overophedning: Ensure adequate ventilation around the controller. Check if the turbofan is operating when temperatures exceed 45°C.
• Forkerte aflæsninger: Verify the battery type setting matches your connected battery. Calibrate battery voltage if there's a discrepancy with a multimeter reading.

7. Specifikationer

8. Garanti og support

For garantioplysninger og teknisk support henvises til producentens officielle website or contact your retailer. Protection plans are available for purchase separately.

• 3-årig beskyttelsesplan: Kan købes.
• 4-årig beskyttelsesplan: Kan købes.
• Fuld beskyttelse: Månedlig plan, der dækker berettigede tidligere og fremtidige køb.

Manufacturer: Temank

Seller: Y-SOLAR