JJC FD-TG1-U3

JJC FD-1 Flash Diffuser Instruction Manual

Model: FD-TG1-U3

1. Produktet er slutview

The JJC FD-1 Flash Diffuser is designed to enhance macro photography by distributing light from your camera's built-in flash. It helps to evenly illuminate close-up subjects, reducing harsh shadows and hot spots for more balanced and natural-looking images. This diffuser is also suitable for underwater macro shooting.

JJC FD-1 Flash Diffuser attached to an Olympus Tough camera and detached
Image: The JJC FD-1 Flash Diffuser shown both attached to an Olympus Tough camera and as a standalone unit. This accessory is designed to soften and spread the light from the camera's internal flash.

2. Kompatibilitet

This flash diffuser is compatible with the following Olympus Tough digital camera models:

  • Olympus Tough TG-7
  • Olympus Tough TG-6
  • Olympus Tough TG-5
  • Olympus Tough TG-4
  • Olympus Tough TG-3
  • Olympus Tough TG-2
  • Olympus Tough TG-1

Vigtig bemærkning: When using the diffuser with Olympus Tough TG-4 (firmware version 2.0 or later), TG-3, TG-2, or TG-1 cameras, you may need to access additional camera settings to optimize exposure accuracy. Exposure accuracy issues may occur depending on the specific shooting environment with these older models.

3. Pakkens indhold

Pakken indeholder:

  • Flash Diffuser ×1

4. Installationsvejledning

Follow these steps to attach the JJC FD-1 Flash Diffuser to your compatible Olympus Tough camera:

  1. Remove the Camera's Accessory Ring: Locate the integral accessory ring around your camera's lens. Gently twist and remove it, typically by turning counter-clockwise.
  2. Align the Diffuser: Take the JJC FD-1 Flash Diffuser and align its mounting mechanism with the camera's lens barrel. Ensure the diffuser is oriented correctly.
  3. Attach and Lock: Twist the diffuser clockwise until it securely locks into place. No additional tools are required for installation.
Step-by-step diagram showing how to install the JJC FD-1 Flash Diffuser
Image: A visual guide demonstrating the three simple steps to install the flash diffuser: 1. Remove the original lens ring. 2. Align and attach the diffuser to the lens. 3. Twist to lock in place.
Person holding an Olympus Tough camera with the JJC FD-1 Flash Diffuser attached, pointing it at coffee beans
Image: An Olympus Tough camera, equipped with the JJC FD-1 Flash Diffuser, being used to photograph coffee beans, illustrating a typical macro photography setup.

5. Betjeningsvejledning

The JJC FD-1 Flash Diffuser features a light intensity adjustment lever, allowing you to control the flash output for optimal results in various shooting conditions.

Justering af lysintensitet

The diffuser includes a lever with two output settings: Høj og Lav. Adjust this lever to select the appropriate light intensity based on your subject distance and ambient lighting. This flexibility helps achieve better exposure and lighting balance for your macro shots.

Close-up of the JJC FD-1 Flash Diffuser showing the light intensity adjustment lever
Billede: En detaljeret view of the flash diffuser highlighting the light intensity adjustment lever, which allows users to switch between high and low output settings.
Person using an Olympus Tough camera with the JJC FD-1 Flash Diffuser for macro photography
Image: A user capturing a macro shot with an Olympus Tough camera and the attached JJC FD-1 Flash Diffuser, demonstrating its application for close-up subjects.

Demonstrationsvideo

Video: This video demonstrates the installation and usage of the JJC FD-1 Flash Diffuser with an Olympus Tough camera, including how to adjust the light intensity for macro photography.

6. Pleje og vedligeholdelse

To ensure the longevity and optimal performance of your JJC FD-1 Flash Diffuser, follow these care guidelines:

  • Rensning: Use a soft, dry cloth to wipe the diffuser. For stubborn dirt, a slightly damp en klud kan bruges, efterfulgt af øjeblikkelig tørring. Undgå slibende rengøringsmidler eller opløsningsmidler.
  • Opbevaring: Store the diffuser in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
  • Håndtering: Handle the diffuser with care to prevent scratches or damage to the diffusing surface.

7. Fejlfinding

If you encounter issues while using your JJC FD-1 Flash Diffuser, consider the following:

  • Ujævn belysning: Ensure the diffuser is securely and correctly attached to the camera lens. Verify that the light intensity adjustment lever is set appropriately for your shooting conditions.
  • Exposure Issues (TG-1/TG-2/TG-3/TG-4): As noted in the compatibility section, older Olympus Tough models (TG-1, TG-2, TG-3, and TG-4 with specific firmware) may require manual adjustments to camera settings for optimal exposure when using the diffuser. Consult your camera's manual for advanced flash or exposure compensation settings.
  • Diffuser Not Attaching: Double-check that the camera's original accessory ring has been completely removed and that the diffuser is aligned correctly before twisting to lock.

8. Produktspecifikationer

MærkeJJC
ModelnummerFD-TG1-U3
Kompatible monteringerOlympus Tough TG-7, TG-6, TG-5, TG-4, TG-3, TG-2, TG-1 Digital Cameras
KamerablitztypeMakro
MonteringstypeIndvendig montering
VandmodstandsniveauVandtæt
Inkluderede komponenterFlash Diffuser ×1
Dimensions of the JJC FD-1 Flash Diffuser
Image: The physical dimensions of the JJC FD-1 Flash Diffuser, showing its compact and lightweight design.

9. Garanti og kundesupport

The JJC FD-1 Flash Diffuser comes with a et års garanti fra købsdatoen, dækker fabrikationsfejl.

For technical assistance, warranty claims, or general inquiries, please visit the official JJC Store or contact their customer support through the retailer where the product was purchased.

Du kan finde mere information og kontaktoplysninger på JJC Butik på Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.