1. Introduktion
This instruction manual provides essential information for the safe and efficient operation of your Walfront Smart Home Floor Heating Thermostat. Please read this manual thoroughly before installation and use, and retain it for future reference. This electric underfloor heating thermostat is designed for precise temperature control in your home, offering smart features and user-friendly functions.
2. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 1 x Electric Underfloor Heating Thermostat
- 1 x Sensor Probe
- 2 x skruer
- 1 x brugermanual
3. Specifikationer
| Varetype | Elektrisk gulvvarme termostat |
| Materiale | PC Flammehæmmende |
| Størrelse | Ca. 86 x 90 x 13 mm / 3.39 x 3.54 x 0.51 tommer |
| Strømforsyning | AC85V-250V 50 / 60Hz |
| Temperatursensor | Negativ temperaturkoefficient |
| Control Temperature Accuracy | ±1 ℃ |
| Belastningsstrøm | ≤16A |
| Temperaturforskel Start | 1 til 10 ℃ |
| Gulvtemperaturområde | 5 to 65℃ / 41 to 149℉ |
| Indstil temperatur | +5 to +50℃ / +41 to +122℉ |
| Beskyttelse mod høj temperatur | +5 to +65℃ / +41 to 149℉ |
| Display temperatur | -20 to +80℃ / -4 to +176℉ |
| Installationsmetode | Vægmonteret |
4. Sikkerhedsoplysninger
- Always cut off the main power supply before any installation, wiring, or maintenance.
- Installationen skal udføres af en kvalificeret fagmand eller i overensstemmelse med lokale el-forskrifter.
- Do not install the thermostat in areas with direct sunlight, drafts, or near heat sources, as this may affect temperature readings.
- Ensure proper wiring connections to prevent damage to the device or electrical hazards.
- Keep the device dry and avoid exposure to moisture or liquids.
5. Installationsvejledning
The thermostat is designed for easy, wall-mounted installation. Follow these steps carefully:
5.1 Demontering
To access the wiring terminals, the front panel of the thermostat must be separated from the back plate.
- Locate the small groove on the side of the thermostat.
- Carefully insert a small flathead screwdriver into the groove and gently pry to lift the display part.
- Separate the display unit from the back mounting plate.
5.2 Ledningsføring
Before wiring, ensure the main power supply to your heating system is turned off at the circuit breaker.
- Strømtilslutning: Connect the main power supply wires to the