1. Introduktion og overview
The Telwin Drive 1800 Kompressor is a compact, multi-functional 12V lithium emergency starter designed for various vehicles including motorcycles, cars, campers, marine engines, and vans. This device integrates an air compressor for tire inflation, a power bank for electronic device charging, and a high-intensity LED light. It utilizes high-efficiency LiPo lithium batteries for quick and complete charging, ensuring a compact and lightweight design. This manual provides essential information for the safe and effective use of your device.
2. Sikkerhedsoplysninger
Læs alle sikkerhedsadvarsler og instruktioner, før du bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.
- Øjenbeskyttelse: Bær altid øjenværn, når du arbejder med batterier.
- Ventilation: Ensure adequate ventilation when charging or jump-starting to prevent accumulation of explosive gases.
- Batterisyre: Battery acid is corrosive. If contact occurs, flush immediately with water and seek medical attention.
- Gnister og flammer: Keep sparks, flames, and smoking materials away from the battery and jump starter.
- Frosne batterier: Forsøg aldrig at sætte gang i et frosset batteri.
- Børn: Opbevar enheden utilgængeligt for børn.
- Overinflation: Do not over-inflate tires or other items. Follow manufacturer's recommended pressure.
- Varme: The compressor and hose may become hot during prolonged use. Allow to cool before handling.
- Opladning: Use only the provided charging cable. Do not expose the device to rain or wet conditions.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Telwin Drive 1800 Kompressor Unit
- Starting Cables (Jump Start Clamps)
- USB-C ladekabel
- Removable Air Hose
- 3 oppustningsdyser
- Opbevaringskasse
Figure 3.1: Included accessories for the Telwin Drive 1800 Kompressor.
4. Produktfunktioner og komponenter
Familiarize yourself with the main components of your Telwin Drive 1800 Kompressor.
Figur 4.1: Forside view of the Telwin Drive 1800 Kompressor.
Figur 4.2: Bagside view with charging and output ports.
Figur 4.3: Detaljeret view af kontrolpanelet.
- LCD-skærm: Shows inflation modes, pressure readings, and battery status.
- Kontrolknapper: Power, mode selection, pressure adjustment (+/-), and LED light activation.
- Starthjælpsport: For connecting the jump start cables.
- USB-A Output (OUT: 5V==2.4A): Til opladning af elektroniske enheder.
- USB-C Input (IN: 5V==2A): For charging the Telwin Drive 1800 Kompressor unit.
- Tilslutning af luftslange: For attaching the removable air hose.
- LED lys: High-intensity light with multiple operating modes.
5. Opsætning
5.1 Indledende opladning
Before first use, fully charge the Telwin Drive 1800 Kompressor. Connect the provided USB-C charging cable to the USB-C input port on the device and to a suitable USB power adapter (not included). The LCD display will indicate charging status. Charging time may vary.
5.2 Montering af luftslangen
To use the compressor function, securely screw the removable air hose into the designated port on the device. Ensure a tight connection to prevent air leakage.
6. Betjeningsvejledning
6.1 Jumpstart af et køretøj
- Ensure the Telwin Drive 1800 Kompressor is sufficiently charged.
- Sluk bilens tænding og alt tilbehør.
- Tilslut RØD positiv (+) clamp til den positive (+) pol på køretøjets batteri.
- Tilslut SORT negativ (-) clamp to a metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect directly to the negative battery terminal unless specified by the vehicle manufacturer.
- Sørg for at clamps are securely attached and do not touch each other.
- Turn on the Telwin Drive 1800 Kompressor.
- Start køretøjet. Hvis det ikke starter med det samme, vent 30 sekunder og prøv igen. Tørn ikke i mere end 3 sekunder pr. forsøg.
- Når køretøjet starter, skal du straks afbryde stikket SORT negativ (-) clamp først, derefter RØD positiv (+) clamp.
Figure 6.1: Jump starting a vehicle using the Telwin Drive 1800 Kompressor.
6.2 Brug af luftkompressoren
- Ensure the air hose is securely attached to the device.
- Select the appropriate inflation nozzle and attach it to the air hose.
- Connect the nozzle to the item to be inflated (e.g., tire valve).
- Turn on the Telwin Drive 1800 Kompressor.
- Use the mode button to select the desired inflation mode (car, SUV, bicycle, inflatables, custom).
- Use the +/- buttons to set the target pressure. The LCD display will show the current and target pressure.
- Press the power button to start inflation. The compressor will automatically stop when the target pressure is reached.
- Frakobl dysen og luftslangen.
Figure 6.2: Inflating a car tire with the integrated compressor.
6.3 Brug som powerbank
To charge electronic devices, connect your device's USB charging cable to the USB-A output port (OUT: 5V==2.4A) on the Telwin Drive 1800 Kompressor. The device will automatically begin charging.
6.4 Brug af LED-lyset
Press the dedicated light button on the control panel to cycle through the LED light modes:
- Fast lys: Til generel belysning.
- Strobe lys: Til signalering eller tiltrækning af opmærksomhed.
- SOS-tilstand: Flashes the international S.O.S. signal.
Figure 6.3: The LED light in operation.
7. Vedligeholdelse
- Genopladning: For optimal batterilevetid bør enheden genoplades hver 3.-6. måned, selvom den ikke er i brug.
- Rensning: Wipe the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasives.
- Opbevaring: Opbevar enheden et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer. Sørg for, at den er fuldt opladet, inden den opbevares i længere tid.
- Luftfilter: Periodically check the air intake vents for dust or debris and clean if necessary to maintain compressor efficiency.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tændes ikke. | Batteriet er afladet. | Oplad enheden helt med USB-C-kablet. |
| Køretøjet starter ikke med startkabler. | Forkert klamp connection; vehicle battery too deeply discharged; device battery too low. | Bekræft clamp connections (red to +, black to chassis); ensure device is fully charged; consult vehicle manual. |
| Kompressoren puster sig ikke op. | Air hose not securely attached; nozzle not properly connected; target pressure not set. | Check all connections; ensure nozzle is firmly attached; set target pressure on the display. |
| LED lys virker ikke. | Device battery is depleted; light button not pressed correctly. | Charge the device; press the light button firmly to cycle modes. |
9. Specifikationer
- Model: Drive 1800 Kompressor
- Fabrikant: Telwin
- Varens vægt: 2 kilo
- Pakkedimensioner: 25.8 x 12.7 x 11 cm
- Modelnummer: 829575
- Maks Ampalder: 1800 A
- Voltage: 12 volt
- Batterisammensætning: Lithium-ion (LiPo)
- Compressor Max Pressure: Op til 3.5 bar
- USB-A-output: 5V == 2.4A
- USB-C-indgang: 5V == 2A
10. Garanti og support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Telwin webwebsted. Gem din købsbevis til garantikrav.