ORIA Bluetooth 5.3 Adapter (Model CP326) User Manual

1. Produktet er slutview

The ORIA Bluetooth 5.3 Adapter (Model CP326) is a versatile 2-in-1 device functioning as both a Bluetooth transmitter and receiver. It enables wireless audio streaming for a wide range of devices, from traditional wired systems to modern Bluetooth headphones and speakers. Featuring Bluetooth 5.3 technology and aptX Low Latency support, it ensures stable, high-quality audio with minimal delay.

Image: The ORIA Bluetooth 5.3 Adapter, a compact and versatile audio device.

Pakkens indhold

Sørg for, at alle varer er til stede ved udpakning:

• ORIA Bluetooth Adapter (Model CP326)
• Instruktionsmanual (dette dokument)
• Type-C opladerkabel
• Airplane Headphone Adapter (dual-pin)
• 3.5mm Female Coupler
• RCA Cable (Red/White to 3.5mm)

Image: The ORIA Bluetooth 5.3 Adapter and its included accessories, such as the Type-C charging cable, airplane adapter, 3.5mm female coupler, and RCA cable.

2. Enhedslayout og kontroller

Familiarize yourself with the adapter's components and controls:

Image: Labeled diagram showing the TX/RX mode select button, reset button, audio cable, charging indicator, Type-C charging interface, connection lights (1 and 2), function button (M), and power button.

• TX/RX Mode Select Button: Slide to switch between Transmitter (TX) and Receiver (RX) modes.
• Power knap: Tryk og hold i 4 sekunder for at tænde/slukke.
• Function Button (M): Used for dual pairing in TX mode.
• Connection Lights (1 & 2): Indicate pairing status and connected devices.
• Opladningsindikator: Viser opladningsstatus.
• Type-C opladningsgrænseflade: Til tilslutning af Type-C-opladerkablet.
• Lydkabel: Integrated 3.5mm audio jack for connecting to audio sources/receivers.
• Nulstil knap: Lille nålehulsknap til at nulstille enheden.

3. Opladning af enheden

Before initial use, fully charge the ORIA Bluetooth Adapter.

1. Connect the provided Type-C charging cable to the adapter's Type-C charging interface.
2. Tilslut den anden ende af kablet til en USB-strømkilde (f.eks. en computers USB-port eller en USB-vægadapter).
3. The charging indicator light will illuminate during charging. It will turn off or change color (depending on model) once fully charged.

A full charge takes approximately 2 hours and provides up to 16 hours of use in TX mode or 18 hours in RX mode.

Image: Diagram illustrating the battery life (16 hours TX, 18 hours RX) and charging time (2 hours for 300mAh battery).

4. Operating Modes and Connection

4.1 Sendertilstand (TX)

In TX mode, the adapter transmits audio from a non-Bluetooth device (e.g., TV, computer, airplane entertainment system) to Bluetooth headphones or speakers.

1. Skift til TX-tilstand: Slide the TX/RX switch to the "TX" position.
2. Tænd: Press and hold the power button for 4 seconds to turn on the adapter. The indicator light will flash green, indicating pairing mode.
3. Tilslut til lydkilde: Plug the adapter's 3.5mm audio jack into the audio output port of your non-Bluetooth device. For airplane entertainment systems, use the provided airplane headphone adapter if necessary.
4. Par med Bluetooth-hovedtelefoner/højttalere: Sæt dine Bluetooth-hovedtelefoner eller -højttalere i parringstilstand.
5. Forbinde: The adapter will automatically search for and connect to nearby Bluetooth audio devices. Once connected, the indicator light 1 will stay green.
6. Dual Pairing (Optional): To connect a second pair of Bluetooth headphones/speakers, press the "M" (Function) button after the first device is connected. Put the second device into pairing mode. Both indicator lights will stay green when two devices are paired.

Image: Visual guide demonstrating the steps to connect the ORIA adapter in Transmitter (TX) mode, including switching the mode, powering on, and pairing with Bluetooth headphones for in-flight entertainment.

Note: Turn off other Bluetooth devices nearby to avoid interference during pairing.

Image: Illustration of the dual pairing capability, allowing two sets of Bluetooth headphones to connect simultaneously to a single audio source via the adapter.

Image: The ORIA Bluetooth 5.3 Adapter connected to an airplane's in-flight entertainment system, enabling wireless audio streaming to personal Bluetooth earbuds.

4.2 Modtagertilstand (RX)

In RX mode, the adapter receives audio from a Bluetooth-enabled device (e.g., smartphone, tablet) and outputs it to a non-Bluetooth audio system (e.g., wired speakers, car stereo, HiFi system).

1. Skift til RX-tilstand: Slide the TX/RX switch to the "RX" position.
2. Tænd: Press and hold the power button for 4 seconds to turn on the adapter. The indicator light will flash green, indicating pairing mode.
3. Connect to Audio Receiver: Plug the adapter's 3.5mm audio jack into the AUX input of your wired speakers, car stereo, or HiFi system. Use the provided RCA cable if your audio system requires RCA inputs.
4. Par med Bluetooth-enhed: On your smartphone, tablet, or other Bluetooth-enabled device, go to Bluetooth settings and search for "BT-20" (or similar device name). Select it to connect.
5. Tilsluttet: Once connected, the indicator light 1 will stay green.

Image: Visual guide demonstrating the steps to connect the ORIA adapter in Receiver (RX) mode, including switching the mode, powering on, and pairing with a smartphone to stream audio to a wired speaker or car stereo.

Image: The ORIA Bluetooth 5.3 Adapter connected to a wired speaker, receiving audio wirelessly from a smartphone, demonstrating its use in RX mode for home audio or car stereos.

Image: The ORIA Bluetooth 5.3 Adapter connected to wired headphones via a 3.5mm female coupler, allowing a smartphone to stream audio wirelessly to the wired headphones.

5. Avancerede funktioner

5.1 aptX Low Latency Technology

The ORIA Bluetooth 5.3 Adapter supports aptX-Adaptive and aptX Low Latency codecs. When paired with aptX-enabled Bluetooth headphones or speakers, it significantly reduces audio delay, providing synchronized sound for video and gaming. This ensures a smooth and immersive experience.

Image: Diagram illustrating the supported audio codecs (SBC, aptX, aptX-LL, aptX-HD, aptX Adaptive) for both TX and RX modes, highlighting low latency and high-fidelity audio transmission.

Note: Both the adapter and your Bluetooth audio device must support aptX for optimal low latency performance. Not compatible with S-O-N-Y series devices (LDAC).

5.2 Stabil forbindelse

Equipped with a Bluetooth 5.3 chip, the adapter offers faster pairing and stronger interference resistance. It maintains a stable Bluetooth connection up to 100 meters (328 feet) in open environments, ensuring consistent audio whether you are across a room or on the go.

Image: Visual representation of Bluetooth 5.3 technology, emphasizing faster connection and more stable transmission compared to older Bluetooth versions.

6. Vedligeholdelse og pleje

• Hold enheden tør. Undgå udsættelse for fugt eller væsker.
• Rengør enheden med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevar enheden på et køligt, tørt sted, når det ikke er i brug.
• Undgå ekstreme temperaturer.
• Forsøg ikke selv at skille enheden ad eller reparere den. Dette vil ugyldiggøre garantien.
• Always follow battery handling and disposal guidelines for lithium-ion batteries.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

The ORIA Bluetooth 5.3 Adapter (Model CP326) comes with a 1 års garanti fra købsdatoen.

For technical support, warranty claims, or further assistance, please contact ORIA customer service through the retailer where the product was purchased or visit the official ORIA webwebsted.

Gem venligst din købsbevis for at validere garantien.