1. Introduktion
This manual provides instructions for the Generic replacement remote control, designed to operate various Technics Compact Disc (CD) Player models. This remote serves as a functional substitute for your original remote control. Please verify that your specific Technics CD player model is listed in the compatibility section to ensure proper functionality.
2. Kompatible modeller
This replacement remote control is compatible with the following Technics CD Player models:
- EUR64798
- EUR64799
- EUR64797
- EUR64782
- EUR643900
- SL-PG590
- SL-PG490
- SL-PG370A
- SL-PG480A
- SL-PG480
- SL-PG100
- SL-P550
If your model is not listed, please consult your device's original manual or contact the seller for compatibility confirmation.
3. Pakkens indhold
- 1 x Generic Replacement Remote Control
4. Opsætning: Batteriinstallation
The remote control requires two (2) AAA batteries for operation. Batteries are not included with the remote control.
- Åbn batterirummet: Find batteridækslet på bagsiden af fjernbetjeningen. Skub dækslet nedad, eller tryk på låsen, og løft det op.
- Indsæt batterier: Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. Incorrect insertion can prevent the remote from functioning.
- Luk rummet: Sæt batteridækslet på igen ved at skubbe det på plads, indtil det klikker sikkert.
Billede: Bagside view of the replacement remote control, illustrating the location of the battery compartment.
Vigtig: Fjern batterierne, hvis fjernbetjeningen ikke skal bruges i længere tid, for at forhindre lækage og skader.
5. Betjeningsvejledning
To operate your Technics CD player with this remote control, ensure there is a clear line of sight between the remote's infrared emitter and the CD player's IR receiver. Point the remote directly at the CD player.
Billede: Forside view of the replacement remote control, displaying the full button layout.
Nøglefunktioner overview:
- SLUK TÆND: Powers the CD player on or off.
- EASY PLAY (CD, TAPE, TUNER): Selects the input source. Press 'CD' for CD player operation.
- DISC (1-0, ≥10): Direct track selection buttons. Use '≥10' for tracks 10 and above (e.g., press '≥10' then '2' for track 12).
- CD (Playback Controls):
- Forrige spor / Næste spor: Skips to the beginning of the previous or next track.
- Spil: Starts CD playback.
- Pause: Pauses CD playback. Press again to resume.
- Stop: Stopper CD-afspilning.
- PROGRAM: Enters program mode to create a custom playback sequence.
- AFBESTILLE: Cancels a programmed sequence or other active function.
- EQ.SPACE: Adjusts equalizer settings or sound space.
- KØRSELSVEJLEDNING: Cycles through various playback modes (e.g., repeat, random).
- V.BASS: Activates or deactivates virtual bass enhancement.
- ON/FLAT: Toggles between sound enhancement and flat equalizer settings.
- REC PAUSE: For recording functions, typically used with a connected tape deck.
- DECK 1/2: Selects between tape decks if applicable.
- TAPE (Playback Controls): Controls for a connected tape deck (e.g., fast forward, rewind, play, stop).
- SOVE: Sets a timer for the device to automatically power off.
- MUTING -20dB: Mutes the audio output by 20 decibels.
- LYDSTYRKE (+/-): Justerer lydstyrken for udgangen.
Note: Some buttons may only function if your Technics CD player or connected audio system supports the corresponding feature. Refer to your Technics CD player's original manual for specific feature details.
6. Vedligeholdelse
- Rensning: Tør fjernbetjeningen af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Batteripleje: Replace batteries when the remote's range decreases or it becomes unresponsive. Always replace both batteries at the same time with new ones of the same type.
- Opbevaring: Opbevar fjernbetjeningen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
7. Fejlfinding
- Fjernbetjeningen svarer ikke:
- Ensure batteries are inserted correctly with proper polarity (+/-).
- Udskift gamle batterier med nye AAA-batterier.
- Check for any obstructions between the remote and the CD player's IR receiver.
- Ensure you are within the effective operating range and pointing the remote directly at the CD player.
- Certain buttons do not work:
- Verify that your specific Technics CD player model supports the function associated with that button. This replacement remote may include buttons for features not present on all compatible models.
- Refer to your Technics CD player's original manual for its specific functionalities.
8. Specifikationer
- Produkttype: Udskiftning af infrarød (IR) fjernbetjening
- Mærke: Generisk
- Farve: Sort
- Batterier påkrævet: 2 x AAA (medfølger ikke)
- Maks. antal understøttede enheder: 1 (Technics CD Player)
- Speciel funktion: Ergonomisk design
9. Garanti og support
As a generic replacement product, specific warranty details may vary. For any issues, questions, or support regarding this remote control, please contact the seller directly through your purchase platform. Ensure you have your order details available for faster assistance.
