Topaz RTL4-SQ-7W-CS-WH 4-inch Performance LED Recessed Retrofit Downlight Instruction Manual

1. Vigtige sikkerhedsoplysninger

Læs og forstå alle instruktioner, før du påbegynder installationen. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer, der kan forårsage materielle skader eller personskade.

• ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til sikringen eller strømafbryderen før installation eller servicering.
• ADVARSEL: Risk of fire. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
• Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
• Velegnet til våde steder.
• Du må ikke lave eller ændre åbne huller i et kabinet af ledninger eller elektriske komponenter under installationen af ​​sættet.
• For at forhindre ledningsskader eller slid, må ledninger ikke udsættes for kanter af metalplader eller andre skarpe genstande.

2. Produktet er slutview

The Topaz RTL4-SQ-7W-CS-WH is a 4-inch square LED recessed retrofit downlight designed for both new construction and existing recessed housings. It features a CCT (Correlated Color Temperature) selectable switch, allowing users to choose from five color temperature options. This 7-watt LED fixture provides 90 CRI quality lighting and is dimmable.

Nøglefunktioner:

• Retrofit trim for 4-inch recessed housings.
• CCT field selectable switch to adjust between 5 color temperatures (2700K, 3000K, 3500K, 4000K, 5000K).
• Square baffle trim with a durable white finish.
• Dimmable LED functionality.
• High Color Rendering Index (CRI) of 90.
• Velegnet til våde steder.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1 x Topaz RTL4-SQ-7W-CS-WH LED Recessed Downlight
• 1 x E26 Adapter
• Hurtige forbindelser

Image 1: The Topaz 4-inch square LED downlight shown with its included E26 adapter, ready for installation.

4. Opsætning og installation

4.1 Forinstallation

Before starting, ensure you have the following tools and materials:

• Skruetrækker
• Trådstrippere (hvis nødvendigt)
• Sikkerhedsbriller
• Handsker
• Existing 4-inch recessed housing

4.2 Installationstrin

1. Sluk for strømmen: Locate the circuit breaker or fuse box and turn off the power supply to the recessed lighting fixture you are replacing or installing. Verify power is off using a voltage tester.
2. Remove Existing Trim (if applicable): Carefully remove the existing bulb and trim from the recessed housing.
3. Connect E26 Adapter: Screw the E26 adapter into the existing E26 socket within the recessed housing.
4. Connect Quick Connects: Plug the quick connect cable from the LED downlight into the quick connect cable from the E26 adapter. Ensure a secure connection.
5. Select CCT (Color Temperature): Before inserting the downlight into the housing, locate the CCT selectable switch on the back of the fixture. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.


Image 2: The back of the Topaz LED downlight showing the CCT selection switch and the connected E26 adapter. The friction clips are also visible.

6. Indsæt downlight: Gently push the LED downlight into the 4-inch recessed housing. The friction clips on the sides of the downlight will secure it in place. Ensure the trim is flush with the ceiling.
7. Gendan strøm: Tænd for strømmen igen ved afbryderen eller sikringsboksen.
8. Prøve: Tænd lyskontakten for at kontrollere, at den fungerer korrekt.

5. Betjeningsvejledning

5.1 CCT Color Selection

The Topaz RTL4-SQ-7W-CS-WH features a CCT selectable switch located on the back of the fixture. This switch allows you to choose from five different color temperatures to suit your preference or application:

• 2700K: Warm White (similar to incandescent)
• 3000K: Blød hvid
• 3500K: Neutral White
• 4000K: Cool White
• 5000K: Dagslys

To change the CCT, you must first remove the fixture from the recessed housing and then slide the switch to the desired setting. Reinstall the fixture after selection.

Billede 3: Et nærbillede view of the CCT selection switch on the back of the downlight, showing the five selectable color temperature options.

5.2 Dæmpningsfunktionalitet

This LED downlight is dimmable. For optimal performance, use with compatible LED-rated dimmers. Refer to your dimmer's instructions for proper installation and operation. Ensure the dimmer is suitable for LED loads.

6. Vedligeholdelse

The Topaz RTL4-SQ-7W-CS-WH LED downlight requires minimal maintenance.

• Rensning: Sørg for, at strømmen er slukket, inden rengøring. Tør armaturet af med en blød, tør eller let fugtet klud.amp klud. Brug ikke skrappe kemikalier, slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de elektriske komponenter.
• Ingen dele, der kan serviceres af brugeren: There are no user-serviceable parts inside this fixture. Do not attempt to disassemble the unit.

7. Fejlfinding

If the fixture does not operate correctly, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, contact a qualified electrician or the manufacturer's support.

8. Specifikationer

9. Garanti og support

This product is manufactured by Topaz and is subject to their standard warranty terms and conditions. Please refer to the official Topaz website or contact their customer service for detailed warranty information.

For technical assistance, troubleshooting, or warranty claims, please contact Topaz customer support directly. Contact information can typically be found on the manufacturer's webwebsted eller produktemballage.