MCI 525 / MCI 727 Series

Generic Remote Control User Manual

For MediaCom MCI 525 and MCI 727 Series Speaker Systems

1. Introduktion

This document provides instructions for the operation and maintenance of your Generic replacement remote control. This remote is designed to be compatible with various MediaCom Karaoke Portable Party PA DJ Speaker Systems, including models MCI 525, MCI 525 Pro, MCI 525+ Pro, MCI 727, MCI 727+, MCI-727, and MCI-525.

As a replacement unit, this remote control is intended to replicate the primary functions of the original remote. Please note that while it offers broad compatibility, some specific functions present on your original device's remote may not be fully replicated.

2. Produktet er slutview

The remote control features a standard layout for audio system control. Familiarize yourself with the button layout as shown in the image below.

Generic replacement remote control for MediaCom speaker systems

Figur 1: Front view of the Generic replacement remote control. The remote is black with light gray buttons. Key buttons include Power (red), Mute, Playback controls (Rewind, Play/Pause, Fast Forward), Mode, Light, Repeat, Record, Rec Play, R-DEL, Echo controls, M.PRI, Bass and Treble adjustment buttons, Master Volume (M.VOL), Equalizer (EQ), Volume (VOL), and a numeric keypad (0-9).

3. Opsætning

This remote control requires two AAA batteries for operation. Batteries are not included with the remote control.

  1. Batteri installation: Locate the battery compartment on the back of the remote control. Open the compartment cover. Insert two AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment. Close the battery compartment cover securely.
  2. Indledende brug: No programming or setup is required for this replacement remote control. Once batteries are installed, it is ready for use with compatible MediaCom speaker systems.

4. Betjeningsvejledning

Point the remote control directly at the infrared receiver on your MediaCom speaker system. Ensure there are no obstructions between the remote and the speaker system.

  • Strøm (ن): Tænder eller slukker for højttalersystemet.
  • Slå lyden fra (🔇): Slår lyden fra eller til.
  • Afspilningskontroller (, ⏯, ⏭): Styr medieafspilning (forrige nummer, afspil/pause, næste nummer).
  • MODE: Cycles through different input modes (e.g., Bluetooth, USB, AUX, FM).
  • LYS: Controls the speaker system's lighting effects.
  • GENTAGE: Toggles repeat playback modes (e.g., repeat one, repeat all).
  • REC: Initiates recording function (if supported by the speaker system).
  • OPTAG SPIL: Plays back recorded audio.
  • R-DEL: Sletter registrerede files.
  • ECHO- / ECHO+: Decreases or increases the echo effect for microphones.
  • M.PRI: Activates or deactivates microphone priority function.
  • BASS (+ / -): Justerer basniveauet.
  • TREBLE (+ / -): Justerer diskantniveauet.
  • M.VOL (+ / -): Adjusts the master volume for microphones.
  • EQ: Skifter gennem equalizer-forudindstillinger.
  • VOL (+ / -): Adjusts the main volume of the speaker system.
  • Numerisk tastatur (0-9): Used for direct track selection, radio station tuning, or other numerical inputs depending on the speaker system's mode.

5. Fejlfinding

  • Fjernbetjeningen svarer ikke:
    • Ensure fresh AAA batteries are correctly installed with proper polarity.
    • Kontrollér for eventuelle forhindringer mellem fjernbetjeningen og højttalersystemets infrarøde modtager.
    • Sørg for, at du er inden for fjernbetjeningens effektive rækkevidde.
  • Nogle funktioner virker ikke:
    • As a replacement remote, not all functions of your original remote may be supported. Refer to your speaker system's original manual for specific function details.
    • Verify that the speaker system is in the correct mode for the desired function (e.g., USB mode for track selection).

6. Specifikationer

ProdukttypeReplacement Infrared Remote Control
MærkeGenerisk
Kompatible modellerMediaCom MCI 525, MCI 525 Pro, MCI 525+ Pro, MCI 727, MCI 727+, MCI-727, MCI-525 Karaoke Portable Party PA DJ Speaker Systems
Strømkilde2 x AAA batterier (medfølger ikke)
FarveSort
FabrikantEasytry

7. Vedligeholdelse

  • Hold fjernbetjeningen ren ved at tørre den af ​​med en blød, tør klud.
  • Avoid exposing the remote to extreme temperatures, direct sunlight, or moisture.
  • Hvis fjernbetjeningen ikke skal bruges i længere tid, skal du fjerne batterierne for at forhindre lækage.

8. Vigtige bemærkninger

This remote control is a replacement unit. While designed for broad compatibility, it may not offer every function or button layout identical to your original equipment manufacturer (OEM) remote. Please ensure your speaker system model is listed in the compatibility section before use.

Relaterede dokumenter - MCI 525 / MCI 727 Series

Preview MCI Electronics Cellocator Device Configuration Guide
A quick configuration guide for MCI Electronics Cellocator devices, covering setup, software installation, physical connections, and parameter configuration for various models including Cello F, Compact CAN, CR200, CR300, and CelloTrack.
Preview SMART Board Mini 727 Interactive Podium Specifications and Features
Detailed specifications, features, and technical details for the SMART Board Mini 727 interactive podium, including display, stylus, camera, connectivity, and dimensions.
Preview Tesla Powerwall 3 Datasheet: Integrated Solar and Battery System
Explore the technical specifications and system configurations of the Tesla Powerwall 3, a fully integrated solar and battery system for home backup, cost savings, and energy independence. Includes details on Gateway 3, Backup Switch, and Backup Gateway 2.
Preview INFICON SL3000 Sniffer Line Brugsanvisning
Betjeningsvejledning til INFICON SL3000 Sniffer Line, der dækker opsætning, funktion, vedligeholdelse, sikkerhed og tekniske specifikationer. Indeholder oplysninger om tilsigtet brug, krav til ejeren og tilbehør.
Preview YYK-525 trådløst business-headset brugermanual
Brugermanual til YYK-525 trådløst business-headset, der dækker produktbeskrivelse, parring, brug, fejlfinding, specifikationer og sikkerhedsforanstaltninger.
Preview MCI HVAC: Detecting Non-Condensable Gases for Optimal Performance
Learn how to identify and address non-condensable gases (NCGs) in MCI coach HVAC systems. This guide provides essential steps for technicians to ensure efficient cooling and prevent compressor damage.