1. Introduktion
This manual provides essential information for the safe and efficient operation of your TESSAN Tower Power Strip, Model ZHC413. Please read these instructions carefully before use and retain for future reference.
The TESSAN Tower Power Strip is designed to provide multiple power outlets and USB charging ports in a compact, vertical form factor. It features individual switches for AC outlets and a flat extension cord for convenient placement.
2. Produktfunktioner
- 12 AC stikkontakter: Giver ampstrømtilslutninger til flere enheder.
- 5 USB -porte: Includes 2 USB-C ports (5V 3A, 15W Max per port) and 3 USB-A ports (5V 2.4A, 12W Max per port) for charging various mobile devices.
- Individuelle kontakter: Four independent switches control the AC outlets on each side, allowing for selective power management. Note: USB ports and their indicator light are controlled by the left-side switch.
- 10 Ft Flat Extension Cord: The ultra-thin flat plug and 10-foot cord allow for easy placement behind furniture and extended reach.
- Space-Saving Tower Design: Vertical orientation minimizes desk clutter and prevents blocking of adjacent outlets.
- Anti-Slip base: Equipped with four anti-slip rubber pads for stability on various surfaces.
- Samlet output: Maximum total output of 1250W. Ensure connected devices do not exceed this limit.
3. Opsætning
- Pakker ud: Tag forsigtigt strømskinnen ud af emballagen.
- Placering: Place the power strip on a stable, flat surface. The anti-slip rubber pads on the base help secure it. Ensure it is away from water sources and heat.
- Tilslut til stikkontakt: Plug the power strip's flat extension cord into a standard 125V AC wall outlet. The flat plug design allows it to fit snugly behind furniture.
- Tænd: Press the main power switch (if available, otherwise the individual switches) to activate the unit.
4. Betjeningsvejledning
- Tilslutning af AC-enheder: Plug your devices into any of the 12 AC outlets. The wide spacing accommodates larger power adapters.
- Using Individual Switches: Each side of the power strip has an individual switch. Press the switch corresponding to the desired side to turn on or off the AC outlets on that side. This allows you to control power to specific devices without affecting others.
- Tilslutning af USB-enheder: Plug your USB-A or USB-C compatible devices into the respective USB ports. The USB ports and their indicator light are controlled by the left-side switch. Note that USB ports are always ON when the unit is powered, provided their controlling switch is active.
- Total Power Limit: Ensure the total power consumption of all connected devices does not exceed 1250W. Overloading can cause the power strip to trip for safety.
5. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | ZHC413 |
| Mærke | THESSAN |
| Samlet antal AC-udtag | 12 |
| Samlet USB-porte | 5 (2 USB-C, 3 USB-A) |
| USB-C udgang | 5V 3A, 15W Max pr. port |
| USB-A-output | 5V 2.4A, 12W Max pr. port |
| Voltage | 125 volt |
| Maksimal strøm | 10 Amps |
| Samlet effekt | 1250W Maks |
| Ledningslængde | 10 Ft |
| Stiktype | Type B - 3-benet (nordamerikansk) |
| Dimensioner (L x B x H) | Ca. 5 cm x 5 cm x 8 cm |
| Materiale | Plast, Gummi |
6. Vedligeholdelse
- Rensning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or sprays.
- Opbevaring: Når strømskinnen ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og fugt.
- Inspektion: Regularly inspect the power cord and the unit for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use immediately and contact support.
7. Fejlfinding
- Ingen strøm til stikkontakter/USB-porte:
- Sørg for, at strømskinnen er sat ordentligt i en fungerende stikkontakt.
- Check if the individual switches for the respective outlets/USB ports are in the 'ON' position.
- Verify that the wall outlet itself is functioning by plugging in another device.
- If the power strip has a reset button (typically on the bottom), press it to reset the circuit breaker. This usually trips if the total load exceeds 1250W.
- USB-enheder oplades ikke:
- Ensure the USB cable is properly connected to both the power strip and the device.
- Confirm the USB ports' controlling switch is active.
- Try a different USB cable or device to rule out a faulty cable or device.
- Note that the USB ports have specific power outputs (15W Max for USB-C, 12W Max for USB-A). Ensure your device's charging requirements are within these limits.
- Overload Protection Tripped: If the power strip suddenly loses power to all outlets, it may have tripped its overload protection. Disconnect some devices, especially high-power ones, and then press the reset button on the bottom of the unit.
8. Sikkerhedsoplysninger
- Do not exceed the maximum total output of 1250W.
- This product is for indoor use only. Do not expose to moisture or wet conditions.
- Do not disassemble or modify the power strip.
- Opbevares utilgængeligt for børn og kæledyr.
- Do not use with aquariums or other water-related products.
- Undgå at placere strømskinnen i nærheden af varmekilder eller i direkte sollys.
- Always plug the power strip directly into a wall outlet. Do not daisy-chain multiple power strips.
9. Garanti og support
TESSAN products come with a warranty. To verify product details, warranty confirmation, and product traceability, please contact our support team with your serial number (SN).
How to Find Your Serial Number (SN)
The unique SN is printed or engraved on the product (usually back/bottom), near technical specifications, safety certifications, and electrical ratings. It is required for warranty and traceability inquiries.
The SN code follows a fixed 13-character format: TS | XX | X | X | XX | XXXXXX
| Positionsområde | Character(s) | Beskrivelse | Rules & Examples |
|---|---|---|---|
| 1-2 | TS | Company Fixed Prefix | Fixed as TS, the abbreviation of TESSAN. |
| 3-4 | XX | Leverandørkode | Unique 2-digit code for each supplier. |
| 5 | X | Product Status Identifier | A=Normal new product; B=After-sales refurbished/repaired product |
| 6 | X | Production Year Identifier | Last digit of the production year. Example: 2023 → 3; 2024 → 4; 2025 → 5 |
| 7-8 | XX | Production Week Identifier | 2-digit code for the production week. Example: Week 1 → 01; Week 2 → 02 |
| 9-13 | XXXXXX | Produktets serienummer | Serial number range: 00001-99999. If exceeding 99999, continue with letters A-Z (excluding I to avoid confusion with 1). Example: 100001 → A0001 |
