Brugermanual til MakerHawk 150W batteribelastningstester

1. Introduktion

The MakerHawk 150W Battery Load Tester is a versatile electronic load device designed for precise testing of various power sources, including batteries, chargers, power banks, and power adapters. It features a 2.4-inch high-definition color screen, supports multiple operating modes (constant current, constant voltage, constant power, constant resistance), and incorporates intelligent safety protections. This manual provides detailed instructions for setup, operation, and maintenance to ensure accurate and reliable performance.

2. Sikkerhedsoplysninger

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the device or connected equipment.

• Ensure proper ventilation during operation, especially during long-term discharge tests, to prevent overheating.
• Overskrid ikke den maksimale volumentage (200V), current (25A), or power (150W) ratings of the device.
• Use appropriate wiring and connectors for the current and voltage-niveauer testes.
• Avoid contact with exposed electrical terminals when the device is powered on.
• Hold enheden væk fra vand, fugt og brandfarlige materialer.
• If the device trips a temperature alarm, reduce the load or improve cooling before resuming operation.
• A 12V power supply (not included) is required to power the unit. Ensure the power supply meets the specified requirements.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• 1x MakerHawk 150W Battery Load Tester
• 1x temperaturføler
• 1x Test Adapter Board
• 1x DC Power Supply (for the tester unit)
• 1x Alligator Clip Line
• 1x Computer Connection Cable
• 1x EU Plug Adapter (may vary by region)

4. Produktet er slutview og funktioner

The MakerHawk 150W Battery Load Tester is equipped with several key features for comprehensive testing:

• 2.4" High-Definition Color Screen: Provides clear and precise readings of voltage, current, power, resistance, capacity, energy, temperature, and other parameters.
• Kompatibilitet med flere enheder: Suitable for discharge aging tests of chargers, cables, power banks, batteries, and power adapters.
• Flere driftstilstande: Supports Constant Current (CC), Constant Power (CP), Constant Resistance (CR), and Constant Voltage (CV) modes.
• Four-Wire System: Ensures accurate voltage measurements by eliminating the effect of wire resistance, comparable to professional instruments. Also compatible with two-wire connections.
• Intelligent Safety Protections: Includes overload, overcurrent, and high-temperature protection (MOS tube and external probe) with real-time monitoring.
• Intelligent køling: Features an intelligent fan for strong airflow and low noise, extending service life and supporting continuous operation.
• PC Software Control: Allows for computer software viewing and setting of parameters.

5. Opsætning

5.1 Strømforsyning til enheden

The load tester requires an external 12V power supply for operation. Connect the provided DC power adapter to the DC input port on the back of the unit. Alternatively, a USB-C power source can be used with the appropriate adapter board.

5.2 Ledningsmetoder

The device supports both simplified two-wire and precise four-wire connection methods for the load. The four-wire system provides higher accuracy by separating the voltage sensing wires from the current carrying wires, thus compensating for voltage drops across the test leads.

• Two-Wire Method: Connect the positive and negative terminals of the power source to the A+ and A- terminals on the load tester. This method is simpler but may have slight voltage measurement inaccuracies due to lead resistance.
• Four-Wire Method: Connect the positive and negative terminals of the power source to the A+ and A- terminals (current paths). Additionally, connect separate voltage sensing wires from the power source to the V+ and V- terminals. This method ensures the most accurate voltage aflæsninger.

5.3 Indstilling af startsprog

Upon first power-up, the device may default to Chinese. Navigate through the menu using the buttons below the screen to locate the language settings and select "English" for easier operation.

6. Betjeningsvejledning

6.1 Interface Introduktion

The 2.4-inch color screen displays various parameters and settings. Familiarize yourself with the main interface and navigation buttons.

6.2 driftstilstande

The load tester supports the following primary operating modes:

• Konstant strøm (CC): Maintains a constant discharge current. Useful for battery capacity testing.
• Constant Voltage (CV): Opretholder et konstant volumentage across the load.
• Constant Power (CP): Maintains a constant power dissipation.
• Constant Resistance (CR): Maintains a constant resistance across the load.

Select the desired mode from the menu and set the target parameters (e.g., current for CC mode, voltage for CV mode). The device will automatically adjust the load to maintain the set value.

6.3 Battery Capacity Testing (Constant Current Mode Exampdet)

To test battery capacity:

1. Sørg for, at batteriet er fuldt opladet.
2. Connect the battery to the load tester using the four-wire method for optimal accuracy.
3. Set the appropriate cutoff voltage for your battery type (e.g., 10.5V for a 12V LiFePO4 battery). This prevents over-discharge.
4. Clear any previous test data to start with a clean slate.
5. Select Constant Current (CC) mode.
6. Set the desired discharge current. Start with a conservative value and monitor the MOS temperature. Do not exceed 99°C. Adjust current as needed, ensuring adequate cooling.
7. The tester will display the discharged capacity (mAh or Ah) and energy (Wh). The test concludes when the battery voltage reaches the set cutoff voltage.

6.4 PC-softwarestyring

The load tester supports connection to a computer for software control and data logging. Use the provided computer connection cable to link the device to your PC. The software allows for viewing real-time data, setting parameters, and analyzing test results. Refer to the software documentation for detailed instructions on installation and usage.

7. Vedligeholdelse

The MakerHawk 150W Battery Load Tester is designed for durability. Regular maintenance is minimal but important for optimal performance:

• Rensning: Hold enheden ren og fri for støv. Brug en blød, tør klud til rengøring. Brug ikke flydende rengøringsmidler.
• Ventilation: Ensure the intelligent cooling fan and heatsink are free from obstructions to maintain proper airflow. Periodically check for dust buildup on the fan blades and heatsink fins.
• Opbevaring: Opbevar enheden på et køligt, tørt sted, når det ikke er i brug.

8. Fejlfinding

• Enheden tændes ikke:
  • Ensure the 12V power supply is correctly connected and functioning.
  • Kontroller, at stikkontakten er aktiv.
• Temperature alarm (OTP) triggers frequently:
  • Reduce the set discharge current or power.
  • Ensure adequate ventilation around the device. Consider using an external fan to assist cooling, especially during high-power or long-duration tests.
  • Check if the heatsink or fan is obstructed by dust or debris.
• Unøjagtig voltage-aflæsninger:
  • Ensure the four-wire connection method is used for maximum accuracy.
  • Kontrollér alle ledningsforbindelser for løse eller korrosion.
• PC-software opretter ikke forbindelse:
  • Verify the USB connection cable is securely plugged into both the tester and the computer.
  • Ensure the correct drivers are installed for the device on your operating system.
  • Check if the software is compatible with your operating system (e.g., Windows 11).
• Display is in an unfamiliar language:
  • Navigate to the system settings menu and select "English" as the display language.

9. Specifikationer

10. Garanti og support

For garantioplysninger og teknisk support henvises til den dokumentation, der fulgte med dit køb, eller kontakt sælgeren direkte. Gem dit købsbevis i tilfælde af garantikrav.