1. Introduktion
Tak for købetasing the TecTake Kade Retro Mushroom Table LampDenne manual indeholder vigtige oplysninger til sikker og effektiv brug af din nye lampLæs venligst disse instruktioner omhyggeligt inden brug, og gem dem til senere brug.
2. Sikkerhedsinstruktioner
- Sørg for at lamp placeres på en stabil, plan overflade for at forhindre væltning.
- Udsæt ikke lamp for vand eller for høj fugtighed. Dette produkt er kun til indendørs brug.
- Behold lamp away from heat sources, direct sunlight, and flammable materials.
- Forsøg ikke at adskille eller modificere lampDette kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
- Brug kun det medfølgende opladningskabel eller et certificeret USB-C-kabel til opladning.
- Betjen ikke lamp if the cable or any part of the lamp er beskadiget.
- Det integrerede batteri kan ikke udskiftes af brugeren.
- Dispose of the product responsibly according to local regulations at the end of its lifespan.
3. Pakkens indhold
Kontroller venligst, at alle varer er til stede i pakken:
- 1 x TecTake Kade Retro Mushroom Table Lamp
- 1 x USB-C opladningskabel
- 1 x Brugermanual (dette dokument)
4. Produktet er slutview
The TecTake Kade Retro Mushroom Table Lamp features a classic 70s-inspired design with modern functionality. It offers indirect, glare-free illumination with three adjustable brightness levels, controlled by a touch switch on the lampskygge. Den lamp is cordless and rechargeable, providing flexibility for placement.
Image 1: The TecTake Kade Retro Mushroom Table Lamp, visasing its full design and included USB-C charging cable.
5. Opsætning
- Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Gem emballagen til senere opbevaring eller transport.
- Indledende opkrævning: Oplad batteriet helt før første brug.amp. Connect the USB-C end of the charging cable to the lamp's charging port (located on the base) and the USB-A end to a suitable USB power adapter (not included) or a computer USB port. The charging indicator (if present, usually a small LED) will show charging status. A full charge typically takes 4-6 hours.
Billede 2: Nærbillede view af lamp's base, showing the USB-C charging port and the included charging cable.
6. Betjeningsvejledning
Lamp features a touch-sensitive switch located on the top of the lampshade for easy control.
- Tænd/sluk: Lightly touch the top of the lampskygge for at dreje lamp on. Touch it again to cycle through brightness levels and eventually turn it off.
- Justering af lysstyrke: Lamp has three brightness levels. Each subsequent touch of the lampshade will cycle to the next brightness level (Low > Medium > High > Off).
- Opladning: When the battery is low, the light output may diminish. Connect the lamp to a power source using the USB-C cable as described in the Setup section. The lamp can be used while charging. A full charge provides approximately 8-10 hours of operation, depending on the brightness level used.
Billede 3: Underside view af lampshade, highlighting the integrated LED light source and the area for touch control.
7. Vedligeholdelse
- Rensning: Afbryd lamp from any power source before cleaning. Wipe the lamp med en blød, tør eller let damp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier.
- Opbevaring: Hvis du opbevarer lamp for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge the lamp every 3-6 months to maintain battery health.
8. Fejlfinding
- Lamp tænder ikke:
- Sørg for at batteriet er opladet. Tilslut l'enamp to a power source and try again.
- Verify that the touch switch area is clean and unobstructed.
- Lamp opkræver ikke:
- Check if the USB-C cable is securely connected to both the lamp and the power adapter.
- Prøv at bruge et andet USB-C-kabel eller en anden strømadapter for at udelukke problemer med kabel/adapter.
- Sørg for, at stikkontakten fungerer.
- Lysstyrkeniveauerne ændrer sig ikke:
- Ensure you are touching the correct area on the lampskygge.
- If the battery is very low, the lamp may not be able to sustain higher brightness levels. Charge the lamp.
If you encounter issues not covered here, please contact TecTake customer support.
9. Specifikationer
Image 4: Technical diagram illustrating the dimensions of the lamp, including total height, base diameter, and lampshade dimensions.
| Feature | Specifikation |
|---|---|
| Modelnummer | 405246 |
| Mærke | TecTake |
| Total Dimensions (Diameter x Height) | Ca. 25 x 34 cm (9.8 x 13.4 tommer) |
| Lamp Base (Diameter x Height) | Ca. 11.5 x 21 cm (4.5 x 8.3 tommer) |
| Lampshade (Diameter x Height) | Ca. 25 x 13 cm (9.8 x 5.1 tommer) |
| Længde på ladekabel | Ca. 116 cm (45.7 tommer) |
| Magt | 5 W |
| Farvetemperatur | 3000 K |
| Batterikapacitet | 2500 mAh |
| Opladningstid | Ca. 4-6 timer |
| Driftstid | Approx. 8-10 hours (depending on brightness) |
| Tilslutningstype | USB-C |
| Vægt | Ca. 1.2 kg (2.6 lbs) |
| Materiale | Coated steel, polymethyl methacrylate, polyvinyl chloride, copper, aluminum |
10. Garanti og support
TecTake products are designed for quality and reliability. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official TecTake website. For technical support, spare parts, or service inquiries, please contact TecTake customer service directly.
Contact information can typically be found on the product packaging or the TecTake official webwebsted.