Indledning
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
Sikkerhedsoplysninger
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
Pakkens indhold
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Chair Base with Wheels
- Gas Lift cylinder
- Sædesamling
- Ryglænssamling
- Nakkestøtte
- Armlæn (venstre og højre)
- Footrest (if applicable to your model)
- Samlebeslag (skruer, skiver, unbrakonøgle)
- Instruktionsmanual
Monteringsvejledning
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- Saml stolebasen: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- Attach the Armrests: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- Fastgør ryglænet: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: Placer forsigtigt det samlede sæde og ryglæn på gasløftcylinderen, og sørg for, at det er centreret og stabilt.
- Installer hovedstøtten: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
Betjeningsvejledning og justeringer
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. Sædehøjdejustering
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. 6-vejs justerbar lændestøtte
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- Lodret justering: Move the lumbar support up or down to align with your lower back curve.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. 3D justerbare armlæn
The armrests provide versatile support and can be adjusted in three dimensions:
- Højdejustering: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- Rotation: Rotate 40 degrees left and right.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- Nakkestøttejustering: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- Liggende funktion: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
Billede: Et nærbillede view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
Opretholdelse
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- Rengøring af netstof: The breathable mesh fabric can be cleaned with a damp klud og mild sæbe. Undgå skrappe kemikalier.
- Rengøring af ramme: Wipe the alloy steel frame and plastic components with a soft, damp klæde.
- Vedligeholdelse af hjul: Periodically check the wheels for hair or debris and clean as needed to ensure smooth movement.
- Stram fastgørelsesanordninger: Kontrollér alle skruer og bolte hver par måneder for at sikre, at de er stramme. Efterspænd om nødvendigt for at opretholde stabiliteten.
Billede: Forstørret view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Stolen justerer ikke højden | Fejl på gasløftecylinder, eller håndtaget er ikke aktiveret. | Sørg for, at højdejusteringshåndtaget er helt aktiveret. Hvis problemet fortsætter, skal gasløftecylinderen muligvis udskiftes. Kontakt kundesupport. |
| Stolen vakler eller føles ustabil | Løse skruer eller ujævnt gulv. | Kontrollér og spænd alle monteringsskruer. Sørg for, at stolen står på en flad og jævn overflade. |
| Armrests are loose | Monteringsskruerne er løse. | Spænd skruerne, der fastgør armlænene til sædet. |
| Ryglænet kan ikke lænes tilbage eller låses | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
Specifikationer
- Mærke: Hbada
- Model: E2
- Farve: Sort
- Produktdimensioner: 30.51" D x 22.24" B x 18.11" H
- Tilbage stil: Mesh
- Aldersinterval (beskrivelse): Voksen
- Armstil: Padded, 3D Adjustable
- Fyldmateriale: Mesh
- Materiale: Alloy Steel (Frame), Mesh (Seat/Back)
- Antal tilbagelænede positioner: 3 (op til 135 grader)
- Vipning: Ja
- Formfaktor: Kontorstol
Garanti og support
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- Udskiftning af dele: Parts are replaced, not repaired, for covered issues.
- 30-dages returpolitik: Enjoy a 30-day return period without specific reasons required.
- Beskadiget ved ankomst: Repair and replacement are guaranteed for items damaged during shipping.
- Kundeservice: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
For mere information, besøg Hbada-butikken på Amazon.