Xvive U7 Saxophone and Trumpet Wireless System Instruction Manual

Indledning

The Xvive U7 is a 2.4GHz wireless system designed for saxophone and trumpet, providing superior sound clarity and performance flexibility. This manual provides essential information for setting up, operating, and maintaining your wireless system.

Hvad er der i æsken

Bekræft at alle varer er til stede i din pakke:

• Xvive U7 Transmitter x1
• Xvive U7 Receiver x1
• Gooseneck Microphone x1
• Pelsforrude x1
• USB-kabel x1
• Sag x1

Image: All components included in the Xvive U7 Saxophone and Trumpet Wireless System package, neatly arranged.

Nøglefunktioner

• 2.4 GHz trådløs: Operates in the 2.4GHz ISM band for clear signal transmission.
• 100ft Working Range: Provides over 100 feet of reliable wireless range.
• Less than 5ms Latency: Ensures real-time audio transmission for distraction-free performance.
• 5-timers batterilevetid: Rechargeable battery for both transmitter and receiver, offering extended usage.
• Supercardioid Condenser Mic: Custom small diaphragm condenser microphone designed to capture the warmth and full-bodied sound of brass and woodwind instruments.
• 6 valgbare kanaler: Allows selection of the best frequency to avoid interference.
• Clip-on Form Factor: Suitable for saxophones, trumpets, trombones, and other brass instruments.

Image: The Xvive U7 wireless system, featuring the transmitter, receiver, and microphone, shown in use with a saxophone.

Billede: Et detaljeret diagram, der viserasing the supercardioid condenser microphone, emphasizing its sensitivity and maximum SPL capabilities.

Image: The clip-on form factor of the Xvive U7 microphone, showing its attachment to a saxophone bell and compatibility with various brass instruments.

Opsætningsinstruktioner

1. Oplad enhederne: Use the provided USB cable to fully charge both the transmitter and receiver before first use. The units have rechargeable lithium polymer batteries.
2. Attach Microphone to Transmitter: Securely screw the gooseneck microphone into the designated port on the transmitter.
3. Monter senderen: Clip the transmitter onto the bell of your saxophone, trumpet, or other compatible instrument. Adjust the gooseneck to position the microphone optimally for sound capture.
4. Tilslut modtageren: Plug the U7 receiver into your mixer, audio interface, or PA system via its XLR output.
5. Tænd: Press and hold the power button on both the transmitter and receiver until the indicator lights illuminate.
6. Vælg kanaler: The system features 6 selectable channels. To pair, ensure both the transmitter and receiver are set to the same channel. Simply click the 'CH' button on the transmitter and the channel button on the receiver to cycle through available channels until they match. The system will automatically pair.

Image: The Xvive U7 receiver connected to an audio mixer, illustrating the wireless connection from the instrument.

Betjeningsvejledning

• Strømstyring: The units provide up to 5 hours of battery life. Monitor the battery indicator lights on both the transmitter and receiver. Recharge when lights indicate low battery.
• Kanalskift: If you experience interference, change the channel on both the transmitter and receiver to an unused frequency. The system supports up to 4 pairs of systems simultaneously.
• Optimal ydeevne: Maintain a clear line of sight between the transmitter and receiver for the best wireless range (up to 100ft). The ultra-low latency of less than 5ms ensures your performance is always in sync.

Opretholdelse

• Rensning: Brug en blød, tør klud til at rengøre enhederne. Undgå at bruge skrappe kemikalier eller slibende materialer.
• Opladning: Recharge the units using the provided USB cable. Do not use damaged cables or chargers.
• Opbevaring: Store the system in its protective case when not in use to prevent damage. Keep away from extreme temperatures and moisture.

Fejlfinding

• Ingen lyd:
  • Sørg for, at både sender og modtager er tændt og fuldt opladet.
  • Verify that both units are on the same channel.
  • Check all cable connections to your mixer/audio interface.
  • Adjust volume levels on your mixer/audio interface.
• Interferens/udfald:
  • Change to a different channel on both units.
  • Reducer afstanden mellem sender og modtager.
  • Ensure there are no large metal objects or other 2.4GHz devices (like Wi-Fi routers) directly between the units.
• Kort batterilevetid:
  • Sørg for, at enhederne er fuldt opladet før brug.
  • Battery life may vary based on usage and environmental factors.

Specifikationer

Garanti og support

For garantioplysninger og teknisk support henvises til den officielle Xvive-version. webwebstedet eller kontakt din lokale forhandler. Gem din købsbevis i tilfælde af garantikrav.