Fein 18V AS 4-Speed Cordless Drill/Driver Set with Hammer Function

1. Introduktion

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Fein 18V AS 4-Speed Cordless Drill/Driver Set with Hammer Function, model ASCM18-4 QMP AS. Please read these instructions thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

2. Sikkerhedsoplysninger

Overhold altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade. Gem denne manual til senere brug.

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Undgå kropskontakt med jordforbundne overflader. Udsæt ikke elværktøj for regn eller våde forhold.
• Personlig sikkerhed: Always wear eye protection, hearing protection, and suitable work clothing. Stay alert and use common sense when operating a power tool.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøjet.
• Brug og vedligeholdelse af batteriværktøj: Genoplad kun med den oplader, der er angivet af producenten. Brug kun elværktøj med specifikt beregnede batteripakker.

3. Produktet er slutview og komponenter

The Fein 18V AS 4-Speed Cordless Drill/Driver Set is designed for versatile drilling and driving tasks. It features a brushless PowerDrive motor, a 4-speed gearbox, and the QuickIN system for rapid accessory changes.

Inkluderede komponenter:

• 1 ASCM 18-4 QMP AS Cordless Drill/Driver (incl. auxiliary handle, belt clip, magnetic bit holder)
• 1 CORE 18 V 4.0 Ah AS Battery Pack
• 1 GAL 1880 CV AS Rapid Charger
• 1 QuickIN Accessory Set, 8 pieces
• 1 L-BOXX 136 Tool Case
• 1 i-BOXX 72
• 1 i-BOXX Rack

4. Opsætning

4.1. Batteriopladning

Before first use, fully charge the battery pack. Insert the battery pack into the GAL 1880 CV AS Rapid Charger. The charger's indicator light will show the charging status. Ensure the battery is securely seated.

4.2. Attaching QuickIN Accessories

The QuickIN system allows for tool-free accessory changes. To attach an accessory:

1. Sørg for, at boremaskinen er slukket, og at batteriet er fjernet af sikkerhedsmæssige årsager.
2. Align the QuickIN accessory with the drill's spindle.
3. Push the accessory firmly onto the spindle until it clicks into place.
4. To remove, pull back the QuickIN collar and detach the accessory.

4.3. Montering af hjælpehåndtaget

For enhanced control and safety, especially during high-torque applications or when using the hammer function, attach the auxiliary handle. Screw the handle into the designated threaded opening on the drill body and tighten securely.

5. Betjeningsvejledning

5.1. Tænd/sluk

To power on the drill, press the trigger switch. The tool will start. To power off, release the trigger switch.

5.2. Hastighedsindstillinger

The drill features a 4-speed gearbox for optimal performance across different materials and applications. Use the speed selector switch located on top of the drill to choose the desired speed range:

• Hastighed 1: Lowest speed, highest torque for heavy-duty drilling and driving large fasteners.
• Hastighed 2: Medium-low speed for general drilling and driving.
• Hastighed 3: Medium-high speed for faster drilling in softer materials.
• Hastighed 4: Highest speed for small diameter drilling and light applications.

5.3. Momentindstillinger

The electronic torque setting offers 15+1 positions, allowing precise control over fastening applications to prevent overtightening or stripping screws. Rotate the torque collar to select the desired setting. The 'drill' symbol engages full torque for drilling operations.

5.4. Hammer Function

Engage the hammer function for drilling into masonry and concrete. This function provides an impact action in addition to rotation. Select the hammer drill mode on the collar for appropriate applications.

5.5. Kickback Monitoring

The integrated kickback monitoring system enhances user safety by detecting sudden tool rotation and automatically shutting down the motor to prevent injury. Maintain a firm grip on the tool and auxiliary handle during operation.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your Fein drill/driver.

• Rensning: Hold ventilationsåbningerne rene og fri for støv. Brug en blød, tøramp cloth to clean the tool housing. Do not use harsh chemicals or abrasive cleaners.
• Batteripleje: Store batteries in a cool, dry place away from direct sunlight. Do not expose batteries to extreme temperatures.
• Tilbehørsinspektion: Regularly inspect QuickIN accessories for wear or damage. Replace worn accessories to maintain performance and safety.
• Opbevaring: Store the tool and accessories in the provided L-BOXX case in a secure, dry location, out of reach of children.

7. Fejlfinding

If you encounter issues with your Fein drill/driver, refer to the following common problems and solutions:

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the warranty card included with your product or visit the official Fein website. For technical support, spare parts, or service, please contact Fein customer service directly. Keep your purchase receipt as proof of purchase.

Fein Customer Service: Besøg venligst www.fein.com/en_us/service/ for kontaktoplysninger og yderligere assistance.