JZAQ BT40 Motorcycle Helmet Bluetooth Headset User Manual

Indledning

Thank you for choosing the JZAQ BT40 Motorcycle Helmet Bluetooth Headset. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.

Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• 1 x Helmet Headset (BT40)
• 6 x Headphone VELCRO (Adhesive Pads)
• 1 x USB ladekabel
• 1 x brugermanual
• 2 x Noise Reducing Sponge Heads (Microphone Covers)

Image: The JZAQ BT40 Helmet Bluetooth Headset, including the main unit with speakers and microphone, USB charging cable, and various adhesive pads and microphone covers.

Specifikationer

Image: A diagram illustrating the dimensions of the headset's earpieces, speaker, microphone, and control unit, highlighting the 0.35-inch thickness of the earpieces.

Opsætning og installation

Follow these steps to properly install the BT40 headset into your helmet:

1. Prepare Earphones: Take the helmet headphones from the box. Attach the "Magic Tape" (Velcro adhesive pads) to the back of both earphones.
2. Position øretelefoner: Remove the protective tape paper from the Velcro on the earphones. Carefully position and stick the earphones into the helmet's ear recesses on both sides. Ensure proper alignment before pressing firmly.
3. Secure Headset: Once the Velcro is attached to the helmet, secure the headset earphones to these Velcro pads.
4. Mikrofonplacering: Position the microphone arm so that the microphone is close to your mouth for clear communication.
5. Endelig kontrol: Ensure all components are securely attached and comfortable within the helmet.

Vigtig bemærkning: Before ordering, please check the inner size of your helmet to ensure a comfortable fit for the headset. The headset's ultra-thin design (0.35 inches) is suitable for most helmets without causing discomfort.

Image: The BT40 headset featuring its ultra-thin speakers, designed to fit comfortably within helmet ear spaces without squeezing the ears.

Image: A motorcycle helmet with the JZAQ BT40 headset microphone arm visible, demonstrating typical installation.

Betjeningsvejledning

Tænd/sluk og parring

• Tænd: Press and hold the Power button (usually the middle button on the control unit) until the indicator light illuminates.
• Sluk: Tryk på tænd/sluk-knappen, og hold den nede, indtil indikatorlampen slukker.
• Parring: When powered on for the first time or when entering pairing mode, the headset will automatically search for Bluetooth devices. On your smartphone or other Bluetooth-enabled device, search for "BT40" in the Bluetooth settings and select it to connect.
• Automatisk forbindelse: After initial pairing, the headset will automatically connect to the last paired device when powered on, if the device is within range.

Opkaldsstyring

• Besvar opkald: The headset supports automatic answering of incoming calls.
• Afslut opkald: Press the Power button once to end an active call.
• Afvis opkald: Press and hold the Power button for approximately 2 seconds to reject an incoming call.

Musikafspilning

• Afspil/pause: Press the Power button once to play or pause music.
• Lydstyrke op: Press the "+" button to increase volume.
• Skrue ned for lyden: Press the "-" button to decrease volume.
• Næste sang: Press and hold the "+" button for approximately 2 seconds to skip to the next track.
• Forrige sang: Press and hold the "-" button for approximately 2 seconds to go to the previous track.

Stemmeassistent

• Aktiver stemmeassistent: Double-click the Power button to activate your smartphone's voice assistant (e.g., Siri, Google Assistant).

Billede: En detaljeret view of the headset's control unit, showing the volume up (+), power/play/pause, and volume down (-) buttons, along with the microphone.

Video: En overview of the JZAQ Motorcycle Helmet Bluetooth Headset BT40, demonstrating its components and basic features.

Opretholdelse

• Rensning: Brug en blød, tør klud til at rengøre headsettet. Undgå at bruge skrappe kemikalier eller slibende materialer.
• Vandeksponering: While the headset is IP67 waterproof, prolonged submersion or exposure to high-pressure water jets should be avoided. Ensure the charging port cover is securely closed when not charging.
• Opbevaring: Opbevar headsettet et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Batteripleje: For at forlænge batteriets levetid bør du undgå at aflade batteriet helt ofte. Oplad headsettet regelmæssigt, selvom det ikke er i brug i længere perioder.
• Mikrofonsvamp: Replace the noise-reducing sponge head on the microphone if it becomes worn or damaged to maintain optimal voice clarity.

Image: The BT40 headset with water droplets, demonstrating its IP67 deep waterproof capability, suitable for use in rainy or snowy conditions.

Fejlfinding

Garanti og support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official JZAQ website. If you experience any dissatisfaction or issues, please contact customer service for assistance.

Kontakte: Please refer to your purchase documentation or the seller's information on the platform where you purchased the product.