Vigtige sikkerhedsinstruktioner
Læs venligst alle instruktioner omhyggeligt, inden du bruger dette produkt. Gem denne manual til senere brug.
- Udsæt ikke enheden for regn, fugt eller ekstreme temperaturer.
- Sørg for tilstrækkelig ventilation omkring enheden. Bloker ikke ventilationsåbninger.
- Brug kun tilbehør/tilbehør specificeret af producenten.
- Tag stikket ud af enheden under tordenvejr, eller når den ikke skal bruges i længere perioder.
- Overlad al service til kvalificeret servicepersonale.
- Forsøg ikke at adskille eller modificere enheden.
Indledning
The 1byone LP03A All-in-One Record Player offers a high-fidelity vinyl listening experience with integrated features for modern connectivity. This belt-drive turntable includes built-in stereo speakers, a magnetic AT-3600L cartridge, and a built-in preamplifier. It also supports wireless audio input via Bluetooth 5.4 and wired connections through an Aux-in port and RCA line output.
Figure 1: The 1byone LP03A All-in-One Record Player.
Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- 1byone LP03A Record Player Unit
- Støvdæksel
- Platter with Drive Belt (pre-installed or separate)
- Modvægt
- Anti-skate vægt
- Strømadapter
- Instruktionsmanual
Produkt overview
Familiarize yourself with the components and controls of your record player.
Forside og Top View
Figur 2: Forside og top View of the Record Player.
- Fad: Understøtter vinylpladen.
- Tonearm: Holder patronen og pennen.
- Cartridge (AT-3600L): Læser pladens riller.
- Modvægt: Balancerer tonearmen og justerer sporingskraften.
- Anti-skate Weight: Prevents the tonearm from drifting inward.
- Hastighedsvælger: Switches between 33 1/3 and 45 RPM.
- Lydstyrke-/tilstandsknap: Controls volume and selects input mode (Phono, Bluetooth, Aux).
- Indbyggede højttalere: Integreret lydudgang.
- Støvdæksel: Beskytter plade og tonearm mod støv.
Bagpaneltilslutninger
Figur 3: Tilslutninger på bagpanelet.
- Phono/Line-Out Switch: Selects between Phono (unpreamplified) and Line (preamplified) output for RCA jacks.
- RCA Jacks (R-RCA-L): Til tilslutning til en ekstern amplifier eller drevne højttalere.
- AUX IN -stik: Til tilslutning af eksterne lydenheder via et 3.5 mm kabel.
- Jordterminal: For connecting a ground wire to an external ampluftfugter for at reducere hum.
- Pitchjustering: Fine-tunes playback speed.
- DC IN 12V: Strømindgang til den medfølgende adapter.
Lydstyrke-/tilstandsknap
Figure 4: Volume and Mode Knobs.
Opsætning
Follow these steps to set up your record player for the first time.
1. Montering af tallerken og bælte
Figure 5: Platter Spindle and Motor Pulley.
- Placer forsigtigt tallerkenen på den midterste spindel.
- Locate the drive belt (usually pre-installed under the platter or in the packaging).
- If not pre-installed, gently stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is flat and not twisted.
2. Cartridge and Stylus
The 1byone LP03A comes with a pre-installed Audio-Technica AT-3600L magnetic cartridge. Ensure the stylus guard is removed before playback.
Figure 6: Audio-Technica AT-3600L Cartridge.
3. Justering af tonearmbalance og sporingskraft
Properly balancing the tonearm and setting the tracking force is crucial for optimal sound quality and to prevent damage to your records and stylus.
Figure 7: Adjustable Counterweight.
- Zero Balance the Tonearm:
- Place the record player on a level surface.
- Fjern stylus-beskytteren.
- Lower the tonearm lift lever.
- Gently release the tonearm clamp.
- Rotate the counterweight at the rear of the tonearm until the tonearm is perfectly balanced horizontally, floating freely.
- Indstil sporingskraft:
- Once balanced, hold the counterweight steady with one hand and rotate only the numbered ring on the front of the counterweight until '0' aligns with the center line on the tonearm.
- Rotate the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is reached. For the AT-3600L cartridge, the recommended tracking force is typically 3.5 grams.
4. Anti-skate Adjustment
The anti-skate mechanism prevents the tonearm from being pulled towards the center of the record. Attach the anti-skate weight's loop to the second groove of the anti-skate post for the recommended setting.
5. Montering af støvdæksel
Insert the hinges of the dust cover into the corresponding slots on the rear of the record player.
6. Strømtilslutning
Connect the power adapter to the DC IN 12V port on the rear panel of the record player, then plug it into a wall outlet.
Operation
Afspilning af en vinylplade
- Læg en plade på fadet.
- Vælg den passende hastighed (33 1/3 eller 45 o/min) ved hjælp af hastighedsvælgeren.
- Ensure the stylus guard is removed.
- Løft tonearmen ved hjælp af tonearmens løftehåndtag.
- Manually position the tonearm over the desired track of the record.
- Gently lower the tonearm using the lift lever. The stylus will make contact with the record and playback will begin.
- Adjust the volume using the Volume/Mode knob.
- To stop playback, lift the tonearm, return it to the tonearm rest, and secure it with the clamp.
Bluetooth-indgang
Pladespilleren kan modtage lyd trådløst fra Bluetooth-aktiverede enheder.
Figure 8: Wireless Bluetooth Input.
- Tænd pladespilleren.
- Rotate the Volume/Mode knob to select Bluetooth mode (indicated by a blue LED).
- Enable Bluetooth on your smartphone, tablet, or computer and search for "1byone LP03A".
- Select the device to pair. Once connected, you can stream audio to the record player's built-in speakers.
Aux-in tilslutning
Connect external audio sources using a 3.5mm audio cable to the AUX IN jack on the rear panel.
- Connect one end of a 3.5mm audio cable to your external device (e.g., MP3 player).
- Connect the other end to the AUX IN jack on the record player.
- Rotate the Volume/Mode knob to select Aux-in mode.
- Adjust volume from both the record player and the external device.
RCA Line Out-forbindelse
Use the RCA Line Out to connect the record player to an external amplifier eller drevne højttalere.
- Determine if your external amplifier has a dedicated PHONO input.
- Hvis din amplifier has a PHONO input, set the Phono/Line-Out switch on the record player's rear panel to FONO. Connect the RCA cables from the record player to the PHONO input of your amplifier. Connect a ground wire from the record player's ground terminal to your amplifier's ground terminal if available.
- Hvis din amplifier gør IKKE have a PHONO input, set the Phono/Line-Out switch on the record player's rear panel to LINE. Connect the RCA cables from the record player to any standard LINE input (e.g., AUX, CD, TAPE) on your amplivligere.
- Adjust the volume on your external amplifier. The record player's internal volume control will not affect the RCA output.
Pitch justering
The Pitch Adjust knob on the rear panel allows for fine-tuning the playback speed. Rotate it slightly to increase or decrease the speed as needed.
Opretholdelse
Regular maintenance ensures the longevity and optimal performance of your record player.
Rengøring af stylus
- Always clean the stylus from back to front using a soft brush designed for stylus cleaning.
- Do not use excessive force or clean from side to side, as this can damage the stylus.
- Replace the stylus when signs of wear are visible (e.g., distorted sound, skipping).
Rengøring af pladespilleren
- Tør enheden af med en blød, tør klud.
- Do not use harsh chemicals, cleaning solvents, or abrasive cleaners.
- Keep the platter and tonearm free of dust and debris.
Dust Cover Care
Clean the dust cover with a soft, lint-free cloth. Avoid using abrasive materials that could scratch the surface.
Fejlfinding
Se dette afsnit for almindelige problemer og deres løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Strømadapteren er ikke tilsluttet; stikkontakten virker ikke. | Sørg for, at strømadapteren er korrekt tilsluttet og sat i en fungerende stikkontakt. |
| Ingen lyd fra højttalerne | Volume too low; incorrect input mode selected; stylus guard still on. | Increase volume; select correct input mode (Phono for records); remove stylus guard. |
| Forvrænget lyd eller springende lyd | Styluspen beskidt eller slidt; sporingskraft forkert; plade beskidt eller beskadiget; pladespilleren er ikke i vater. | Clean or replace stylus; re-adjust tracking force; clean record; ensure turntable is on a level surface. |
| Brummende støj | Ground wire not connected (if using external preamp); interference. | Connect ground wire to external amplifier; move unit away from other electronic devices. |
| Bluetooth forbinder ikke | Record player not in Bluetooth mode; device too far; device already connected to another unit. | Ensure record player is in Bluetooth mode; move device closer; disconnect from other devices. |
Specifikationer
Technical specifications for the 1byone LP03A Record Player.
- Model: LP03A
- Drevtype: Bælt Drive
- Hastigheder: 33 1/3, 45 omdr./min
- Patron: Audio-Technica AT-3600L (Magnetic)
- Indbygget Preamplivligere: Ja
- Højttalere: Indbyggede stereohøjttalere
- Trådløs forbindelse: Bluetooth 5.4
- Indgange: Aux-in (3.5 mm)
- Udgange: RCA Line Out (Switchable Phono/Line)
- Strømforsyning: DC 12V
- Dimensioner (ca.): 17.32 x 14.09 x 7.4 tommer (L x B x H)
- Vægt (ca.): 17.16 pund
Figur 9: Produktmål.
Garanti og support
Your 1byone LP03A Record Player is covered by a comprehensive warranty and return policy.
- Garanti: 36 måneder
- Returpolitik: 90 dage
- Kundesupport: For hjælp, kontakt os venligst på ushelp@1byonebros.com.
