Blade Revolution 90 FP RTF RC Helicopter

Indledning

The Blade Revolution 90 FP RTF (Ready-To-Fly) RC Helicopter is designed for ease of use and enjoyment, suitable for both beginners and experienced pilots. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your helicopter.

Image: The Blade Revolution 90 FP RTF Micro RC Helicopter in stable flight, showcasing dens kompakte design.

Sikkerhedsoplysninger

Læs HELE betjeningsvejledningen for at blive fortrolig med produktets egenskaber, før du bruger det. Manglende betjening af produktet korrekt kan resultere i skader på produktet, personlige ejendele og forårsage alvorlig personskade. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

Hvad er der i æsken

Upon unboxing your Blade Revolution 90 FP RTF RC Helicopter, verify that all the following components are included:

• (1) Blade Revolution 90 FP Helicopter with:
  • (2) Linear Servos (installed)
  • (2) Coreless Motors (installed)
  • (1) Spektrum SLT Receiver and Dual ESC Control Unit (installed)
• (1) Spektrum 150mAh 1S 3.7V LiPo Battery
• (1) Spektrum 1S USB LiPo Battery Charger
• (1) Spektrum SLT6 2.4GHz sender
• (4) AA Alkaline Batteries (for the transmitter)
• (1) RealFlight Trainer Edition Trial Version Installation Guide and Steam Key
• Produktmanual

Image: All components included in the Blade Revolution 90 FP RTF package, ready for use.

Opsætning

1. Batteriopladning

Before your first flight, ensure the Spektrum 150mAh 1S 3.7V LiPo Battery is fully charged using the included Spektrum 1S USB LiPo Battery Charger. Connect the charger to a USB power source and then connect the battery. The charger's indicator light will show the charging status (refer to the charger's specific instructions for light indications).

2. Forberedelse af senderen

Insert the four AA Alkaline Batteries into the Spektrum SLT6 2.4GHz Transmitter. Ensure correct polarity. The transmitter is pre-bound to the helicopter for immediate use.

3. Helicopter Preparation

The Blade Revolution 90 FP is ready to fly with no assembly required. Once the helicopter battery is charged, carefully connect it to the helicopter's power port. Ensure the connection is secure. Place the helicopter on a flat, level surface before powering on the transmitter.

Betjeningsvejledning

Flight Modes and SAFE Technology

The Blade Revolution 90 FP features exclusive SAFE technology, which significantly simplifies flying by providing self-leveling and flight envelope protection. This makes it easier for new pilots to learn and control the helicopter.

Image: The SAFE Technology logo, indicating advanced flight stabilization features.

An optional flight altitude mode is available, which further assists in maintaining a consistent altitude, making the helicopter even easier to fly, especially for beginners. Refer to your transmitter's manual for details on activating and deactivating this mode.

Image: The Blade Revolution 90 FP helicopter in flight, highlighting its suitability for beginners with no prior experience.

Basic Flight Controls (Spektrum SLT6LP 6-channel transmitter)

Familiarize yourself with the Spektrum SLT6LP 6-channel transmitter. The primary controls typically include:

• Throttle Stick (Left Stick, vertical): Controls the main rotor speed and thus the helicopter's altitude.
• Rudder Stick (Left Stick, horizontal): Controls the tail rotor, allowing the helicopter to rotate left or right (yaw).
• Aileron Stick (Right Stick, horizontal): Controls side-to-side movement (roll).
• Elevator Stick (Right Stick, vertical): Controls forward and backward movement (pitch).

Always perform pre-flight checks, including battery levels and control surface responses, before each flight. Start with gentle movements in an open, clear area.

Image: The Blade Revolution 90 FP helicopter positioned on a couch, illustrating its compact size suitable for indoor environments.

Opretholdelse

Regular maintenance ensures the longevity and optimal performance of your Blade Revolution 90 FP helicopter.

• Inspektion efter flyvning: After each flight, visually inspect the helicopter for any signs of damage, loose parts, or wear on the rotor blades, tail boom, and landing gear.
• Rensning: Gently clean the helicopter with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Rotorblade: Check main and tail rotor blades for cracks or chips. Replace damaged blades immediately to maintain flight stability and safety.
• Motor and Servos: Ensure the coreless motors and linear servos operate smoothly without obstruction. Keep them free from dust and debris.
• Batteripleje: Store LiPo batteries in a cool, dry place at a storage charge (around 3.8V per cell) if not used for extended periods. Never overcharge or over-discharge the battery.

Billede: En detaljeret view of the main rotor head assembly, crucial for flight control and requiring regular inspection.

Billede: Side view of the helicopter revealing its internal electronics, including the control unit and wiring.

Fejlfinding

This section addresses common issues you might encounter with your Blade Revolution 90 FP helicopter.

For persistent issues not listed here, refer to the comprehensive product manual included in the box or contact Blade customer support.

Specifikationer

Garanti og support

For detailed warranty information and customer support, please refer to the official product manual included in your package. You can also visit the Blade official store on Amazon eller producentens webwebsted for de seneste supportressourcer og kontaktoplysninger.