Soundavo PSB-1000DSP(Version 2)
Soundavo PSB-1000DSP (Version 2) Subwoofer Amplivligere brugervejledning
Class D 1000W RMS Subwoofer Amplifier til hjemmebiograf
1. Introduktion
Tak for købetasing the Soundavo PSB-1000DSP (Version 2) Subwoofer Amplifier. Det her amplifier is designed to deliver powerful and precise bass for your home theater and audio systems. Featuring a Class D circuit design, built-in DSP settings, and versatile connectivity options, it provides an exceptional audio experience. This manual will guide you through the setup, operation, and maintenance of your new amplivligere.
2. Sikkerhedsoplysninger
Læs venligst alle sikkerhedsinstruktioner omhyggeligt, inden du bruger ampBehold denne manual til senere brug.
- Strømkilde: Tilslut ampkun til den angivne strømforsyningsvolumentage as indicated on the unit. Ensure the AC voltage selector is set correctly for your region (110-120V or 220-240V).
- Ventilation: Bloker ikke ventilationsåbninger. Sørg for tilstrækkelig luftgennemstrømning omkring enheden for at forhindre overophedning.
- Vand og fugt: Udsæt ikke amplifier to rain, moisture, or excessive humidity. Do not place objects filled with liquids, such as vases, on the unit.
- Varme: Behold amplifier away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.
- Rensning: Tag stikket ud af stikkontakten før rengøring. Brug en tør klud til rengøring. Brug ikke flydende rengøringsmidler eller sprayrengøringsmidler.
3. Produktet er slutview
The Soundavo PSB-1000DSP (Version 2) is a high-performance Class D subwoofer amplifier designed for robust bass delivery in home theater environments. It features a 2U rack-mountable design and provides 1000W RMS at 4 Ohms. The integrated Digital Signal Processing (DSP) allows for precise control over audio parameters, ensuring optimal performance with various subwoofer sizes and room acoustics.
Figur 3.1: Forside view of the PSB-1000DSP amplifier with its remote control, showcasing the LCD display and control knob.
Nøglefunktioner:
- Høj Wattage Power Output: Delivers 1 x 1000W RMS @ 4 Ohms (or 2 x 500W RMS @ 8 Ohms minimum load).
- Alsidig tilslutning: Stereo/mono line level audio input (RCA), LFE input, stereo speaker level input/outputs.
- RS-232 Control Ports: For integration with control systems, allowing master volume and muting control.
- Digital Signal Processing (DSP): Built-in DSP for adjusting Crossover Frequency, Crossover Slopes, Phase, Low Cut, and storing up to 3 presets.
- Flexible Power Management: Audio On/Off Detects, RS-232, and 12VDC Trigger for automatic power control.
- Brugervenlig grænseflade: LCD display on the front panel for easy navigation and settings adjustment.
- Beskyttelsesfunktioner: Short circuit and thermal protection built-in.
4. Pakkens indhold
Upon unpacking your Soundavo PSB-1000DSP (Version 2) amplifier, please ensure all items are present and in good condition:
- Soundavo PSB-1000DSP (Version 2) Subwoofer Amplivligere
- IR fjernbetjening
- AC strømledning
- Brugervejledning (dette dokument)
If any items are missing or damaged, please contact your retailer or Soundavo customer support immediately.
5. Opsætning og forbindelser
Proper setup is crucial for optimal performance. Follow these steps to connect your amplivligere.
5.1 Bagpanel overview
Figure 5.1: Rear panel of the PSB-1000DSP amplifier, detailing the various input, output, and control ports.
5.2 AC Voltage Vælger
Before connecting the power cord, ensure the AC VOLTAGE SELECTOR switch on the rear panel is set to the correct voltage for your region (110-120V or 220-240V). Incorrect voltagDette valg kan beskadige enheden.
Figure 5.2: Detail of the AC Voltage Selector switch on the rear panel.
5.3 Lydforbindelser
The PSB-1000DSP offers multiple ways to connect to your audio system:
- Line Level Input (RCA): Connect your receiver's LFE (Subwoofer Out) or stereo pre-out to the LINE IN (LFE/MONO or L/R) RCA jacks. If using a single LFE output, connect to the LFE/MONO input.
- Højttalerniveauindgang: For receivers without line-level outputs, connect the speaker outputs of your receiver to the SPEAKER LEVEL IN terminals. Use the SPEAKER LEVEL OUT terminals to pass the signal through to your main speakers if needed.
- Subwooferudgang: Connect your passive subwoofer(s) to the SUB OUTPUT binding posts. The amplifier supports 1 x 1000W RMS @ 4 Ohms or 2 x 500W RMS @ 8 Ohms. Ensure your subwoofer's impedance matches the amplifiers outputkapaciteter.
Figure 5.3: Detail of the subwoofer output terminals, indicating connection options for 4 Ohm and 8 Ohm loads.
5.4 Styreforbindelser
- 12V udløser: Connect a 12V trigger cable from your receiver or control system to the 12V TRIGGER IN jack. This allows the amplifier to power on/off automatically with your main system.
- RS-232: Use the RS-232 port for advanced control integration with home automation systems. Refer to the RS-232 command set documentation for detailed protocols.
- SERVICE USB: This port is for firmware updates and service purposes only. Do not connect consumer devices to this port.
6. Betjening af Amplivligere
The PSB-1000DSP (Version 2) can be operated via its front panel controls or the included IR remote control.
6.1 Betjeningselementer på frontpanelet
The front panel features an LCD display and a multi-function knob (Value-Push to Enter).
Figure 6.1: Close-up of the LCD display, showing volume and other DSP settings.
- LCD-skærm: Shows current settings, menu options, and volume level.
- Multifunktionsknap: Rotate to navigate menu options or adjust values. Push to select an option or confirm a setting.
6.2 Fjernbetjeningsfunktioner
The IR remote control provides convenient access to all amplifier funktioner.
Figure 6.2: The included IR remote control for the PSB-1000DSP amplivligere.
- Tænd/sluk: Drejer amplivligere til eller fra.
- STUM: Slår lyden fra eller til.
- UP/VOL+, DOWN/VOL-: Justerer lydstyrken.
- LEFT, RIGHT: Navigates menu options horizontally.
- MENU/ENTER: Åbner menuen eller bekræfter et valg.
- AFSLUT: Exits the current menu or setting.
- STORE 1/2/3: Saves current DSP settings to one of three memory presets.
- RECALL 1/2/3: Recalls one of the three saved DSP presets.
- FLAD: Resets DSP settings to a flat frequency response.
- NAT TIL/FRA: Activates or deactivates Night Mode, which typically reduces dynamic range for late-night listening.
6.3 DSP-indstillinger
The built-in DSP allows for fine-tuning of your subwoofer's performance. Access the DSP menu via the front panel knob or remote control.
- Master Volume Level: Justerer subwooferens samlede udgangslydstyrke.
- Krydsfrekvens: Sets the upper frequency limit for the subwoofer. Adjustable to blend seamlessly with your main speakers.
- Crossover skråninger: Select from 4 different slopes (e.g., 12dB, 24dB, 36dB, 48dB per octave) to control the steepness of the crossover filter.
- Fase: Adjusts the phase (0° or 180°) to ensure the subwoofer's output is in phase with your main speakers, preventing cancellation at the crossover point.
- Lavt snit: Sets a high-pass filter to remove extremely low frequencies that may not be reproducible by your subwoofer or could cause distortion.
- Presets: Store up to 3 customized DSP settings optimized for different content (e.g., music, movies, late-night listening) or subwoofer sizes (e.g., 8", 10", 12" subs).
6.4 Power Management Modes
The three-way switch on the rear panel allows you to select the amplifier's power-on mode:
- 12V Trigger Mode: De amplifier powers on/off when a 12V trigger signal is detected.
- Auto On/Off (Music Signal Detect): De amplifier automatically turns on when an audio signal is detected and enters standby after a period of no signal. The auto-off delay can be set from 5-30 minutes in 5-minute increments via the DSP menu.
- Always On Mode: De amplifier remains powered on continuously.
7. Vedligeholdelse
To ensure the longevity and optimal performance of your Soundavo PSB-1000DSP ampLifier, følg disse vedligeholdelsesretningslinjer:
- Rensning: Regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as they may damage the finish.
- Ventilation: Ensure that the ventilation grilles are free from dust and obstructions. Periodically use a soft brush or vacuum cleaner to remove any accumulated dust.
- Forbindelser: Kontrollér lejlighedsvis alle kabelforbindelser for at sikre, at de er fastgjorte og fri for korrosion.
- Opbevaring: Hvis du opbevarer ampHvis apparatet ikke bruges i en længere periode, skal du afbryde forbindelsen til strømforsyningen og opbevare det et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer.
8. Fejlfinding
Hvis du støder på problemer med din ampLifier, se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm / Enheden tænder ikke. | Power cord not securely connected; AC voltage selector incorrect; Power outlet faulty. | Ensure power cord is fully inserted. Verify AC voltage selector matches your region's voltage. Test power outlet with another device. |
| Ingen lyd fra subwooferen. | Input cables loose or incorrect; Subwoofer cables loose or incorrect; Amplifier muted; Incorrect input selected; DSP settings (e.g., Low Cut too high). | Check all RCA/speaker level input and subwoofer output connections. Ensure amplifier is not muted. Verify correct input source is selected on your receiver/preamp. Vedrview DSP indstillinger. |
| Amplivligere slukker uventet. | Overheating; Auto On/Off mode engaged with no signal; Short circuit in speaker wiring. | Ensure adequate ventilation. Check power management mode (12V Trigger, Auto On/Off, Always On). Inspect speaker wiring for shorts. Allow unit to cool if overheated. |
| Forvrænget eller dårlig lydkvalitet. | Incorrect DSP settings; Overdriving the amplifier/subwoofer; Loose connections. | Adjust DSP settings (Crossover, Phase, Volume). Reduce input level from source. Check all audio connections. |
| Fjernbetjening virker ikke. | Batteries dead or inserted incorrectly; Obstruction between remote and ampFjernbetjeningssensor blokeret. | Replace batteries. Ensure clear line of sight to the ampliferens IR-sensor. |
| Difficult menu navigation. | User unfamiliarity with sequential menu access. | Familiarize yourself with the menu structure. Use the remote control for easier navigation. Note that some settings require sequential scrolling. |
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | PSB-1000DSP(Version 2) |
| Udgangseffekt | 1000 Watts RMS @ 4 Ohms (1 x 1000W) or 500 Watts RMS @ 8 Ohms (2 x 500W) |
| Amplivligere klasse | Klasse D |
| Forbindelsesteknologi | RCA |
| Controller type | Foot Control (referring to the knob, not a literal foot pedal) |
| Speciel funktion | Subwoofer Amplifier med DSP |
| Kompatible enheder | Amplifier, Receivers, Pre-amps |
| Lydudgangstilstand | Omgive |
| Surround Sound Kanalkonfiguration | 5.1 (typical system integration) |
| Farve | Sort |
| Varens vægt | 17.69 pund |
| Pakkedimensioner | 22.36 x 17.63 x 9.29 tommer |
| Fabrikant | Soundavo |
10. Garanti og support
Soundavo products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Soundavo webhjemmeside for detaljerede garantivilkår.
For technical support, troubleshooting assistance, or warranty claims, please contact Soundavo customer service through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (PSB-1000DSP Version 2) and purchase details ready.
For mere information, besøg Soundavo Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.