OFFNOVA Hat Heat Press Machine Brugermanual

1. Introduktion

Thank you for choosing the OFFNOVA Hat Heat Press Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new heat press. Designed for both sublimation and HTV iron-on projects, this machine offers precise temperature and time control, ensuring consistent and professional results for various cap styles.

Figure 1.1: OFFNOVA Hat Heat Press Machine (Handle-Blue) with example hats.

Nøglefunktioner:

• Rapid & Even Heating: One-piece cast aluminum heating plate with Teflon coating for uniform heat distribution up to 400°F (204°C).
• Easy & Stable Operation: Ergonomic handle and four-bar linkage system, combined with anti-slip silicone suction cups for stability.
• Dual Cap Platens: Includes 2 interchangeable hat bases with different curvatures to fit 99% of cap styles, plus a built-in hat stretcher.
• Adjustable Pressure Control: Easy-to-turn pressure knob for fine-tuning pressing force.
• Smart Auto Countdown: Automatic timing initiation upon handle pull-down and audible alert upon completion.

2. Komponenter og opsætning

2.1 Udpakning og inspektion

Carefully remove all components from the packaging. Inspect the machine for any signs of damage during transit. Retain the original packaging for future storage or shipping.

2.2 Komponentidentifikation

Familiarize yourself with the main parts of your heat press machine:

• Heating Platen (Upper)
• Lower Platen (Interchangeable)
• Control Panel (Digital Display, Temp/Time Buttons)
• Trykjusteringsknap
• Betjeningshåndtag
• Strømafbryder
• Strømledningsindgang

Figure 2.1: Machine dimensions and interchangeable platens (4x3 inch and 5.5x3.7 inch).

2.3 Indledende opsætning

1. Place the heat press on a stable, heat-resistant surface. Ensure adequate ventilation around the machine.
2. Connect the power cord to the machine's power inlet and then to a grounded electrical outlet (AC110V/60Hz).
3. Sørg for, at afbryderen er i OFF-positionen, før du tilslutter den.
4. Select and install the appropriate lower platen for your cap size. The machine comes with two interchangeable platens to accommodate various cap styles.

3. Betjeningsvejledning

3.1 Kontrolpanel overview

Figure 3.1: Digital Control Panel for Temperature and Time.

• Digital skærm: Shows current temperature and set time.
• Temperaturkontrol: Adjustable from 0-400°F (0-204°C).
• Tidskontrol: Adjustable from 0-999 seconds.
• Magt: 500W.
• Voltage: AC110V/60Hz.
• Time Up Alarm: Alerts when the set time is complete.
• Automatisk nedtælling: Initiates automatically when the handle is pressed down.

3.2 Justering af tryk

The pressure adjustment knob, located on top of the heating platen, allows you to fine-tune the pressing force. Turn clockwise to increase pressure and counter-clockwise to decrease pressure. Adjust based on the thickness of the cap and transfer material for optimal results.

3.3 Trin-for-trin betjening

Figure 3.2: Four-step operation guide.

1. Prepare the Hat: Place your hat on the lower platen. Adjust the pressure knob as needed to ensure a snug fit and even contact.
2. Indstil temperatur og tid: Turn on the power switch. Use the control panel to set your desired temperature and time according to your transfer material's specifications. The machine will begin to heat up.
3. Initiate Pressing: Once the machine reaches the set temperature, place your transfer design on the hat. Pull the operating handle down firmly to engage the heating platen. The automatic countdown will begin.
4. Fuld overførsel: When the set time expires, an alarm will sound. Release the handle and carefully remove the hat. Allow the transfer to cool if required by the material's instructions.

Figure 3.3: Machine in use, demonstrating versatile application.

4. Vedligeholdelse

4.1 Rengøring

• Tag altid stikket ud af maskinen, og lad den køle helt af, inden du rengør den.
• Wipe the Teflon-coated heating platen with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals, as they can damage the coating.
• Clean the lower platen and exterior surfaces with a damp klæde.
• Ensure no liquids enter the control panel or electrical components.

4.2 Opbevaring

Store the heat press in a dry, dust-free environment. If possible, use the original packaging for protection. Keep out of reach of children.

5. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på. Ved problemer, der ikke er nævnt her, bedes du kontakte kundesupport.

6. Specifikationer

7. Garantioplysninger

The OFFNOVA Hat Heat Press Machine (Model HPM-H0) comes with a 1-års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og funktionsfejl ved normal brug. Gem venligst din købsbevis til garantikrav.

For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official OFFNOVA webwebsted.

8. Kundesupport

If you have any questions, require technical assistance, or need to report an issue with your OFFNOVA Hat Heat Press Machine, please contact our customer support team.

Please have your model number (HPM-H0) and purchase information ready when contacting support to expedite assistance.

For mere information og ressourcer kan du besøge OFFNOVA Store on Amazon.