Moonshan MS-HFM-5K Viskøs Væskepåfyldningsmaskine Brugermanual

1. Introduktion

Thank you for choosing the Moonshan MS-HFM-5K Viscous Liquid Filling Machine. This machine is designed for precise and efficient filling of various viscous liquids such as honey, oil, gel, laundry detergent, and sauces. It features a robust stainless steel gear pump and offers both weight-based and time-based filling modes to ensure high accuracy. Please read this manual thoroughly before operation to ensure safe and correct usage, optimal performance, and longevity of your machine.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af maskinen:

• Ensure the machine is placed on a stable, level surface before operation.
• Tilslut maskinen til en jordet stikkontakt med den korrekte lydstyrke.tage.
• Betjen ikke maskinen med våde hænder eller i våde forhold.
• Hold hænder og løstsiddende tøj væk fra bevægelige dele under drift.
• Always disconnect power before cleaning, maintenance, or when the machine is not in use.
• This machine is designed for viscous liquids. Do not use it for thin liquids, liquids with solid particles (like seeds), or corrosive chemical solutions.
• In case of malfunction, immediately turn off the machine and disconnect power. Do not attempt unauthorized repairs.

3. Produktet er slutview og komponenter

The Moonshan MS-HFM-5K is a compact yet powerful filling machine. Familiarize yourself with its main components:

Nøglekomponenter:

• Kontrolpanel: Digital display and buttons for setting parameters (weight, time, speed).
• Weigh Pan: Platform for placing containers during weight-based filling.
• Anti-drip Nozzle: Dispenses liquid and prevents dripping after filling.
• Indløbsrør: Connects to the liquid source.
• Outlet Tube: Connects from the pump to the nozzle.
• Støttestang: Adjustable rod for nozzle height.
• Afbryderen: Tænd/sluk-knap til maskinen.
• Stainless Steel Gear Pump: The core pumping mechanism, designed for viscous liquids.

The machine is specifically designed for viscous liquids. Refer to the image below for suitable and unsuitable liquid types.

4. Opsætning

Følg disse trin for indledende opsætning:

1. Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Kontroller, at alle dele, der er anført på pakkelisten, er til stede og ubeskadigede.
2. Placering: Position the machine on a stable, flat, and clean surface. Ensure adequate space around the machine for operation and maintenance.
3. Tilslut rør: Attach the inlet tube to the liquid source (e.g., a container of honey). Connect the outlet tube from the pump to the anti-drip nozzle. Ensure all connections are secure to prevent leaks.
4. Nozzle Height Adjustment: Adjust the height of the anti-drip nozzle using the slide rail design on the support rod. The adjustable range is 0-13 inches. Position the nozzle appropriately for your containers to minimize splashing and ensure accurate filling.



5. Strømtilslutning: Sæt netledningen i en passende jordet stikkontakt.

5. Betjeningsvejledning

The MS-HFM-5K offers two primary operating modes: Weight Filling Mode and Time Filling Mode.

5.1. Generel drift

1. Turn on the machine using the power switch. The control panel display will illuminate.
2. Select your desired filling mode (Weight or Time) using the buttons on the control panel.
3. Place an empty container on the weigh pan (for weight mode) or under the nozzle (for time mode).
4. Adjust filling parameters as described below.
5. Press the 'Start' button to begin the filling process.

5.2. Weight Filling Mode

This mode is ideal for precise filling based on the target weight of the liquid.

1. Select 'Weight Mode' on the control panel.
2. Place an empty container on the weigh pan. The display will show its weight.
3. Press the 'Tare' button to zero out the container's weight.
4. Use the '+' and '-' buttons to set the desired target filling weight.
5. Press 'Start'. The machine will automatically fill the container to the set weight with an accuracy of up to 1 gram.

5.3. Time Filling Mode

This mode fills containers for a set duration, suitable for consistent volume filling, especially for pouches.

1. Select 'Time Mode' on the control panel.
2. Use the '+' and '-' buttons to set the desired filling duration in seconds.
3. Place an empty container under the nozzle.
4. Press 'Start'. The machine will fill for the set duration. It is recommended to perform a test fill and adjust the time for desired volume.

5.4. Adjusting Filling Speed (Three-Stage Filling)

The machine features a three-stage filling speed for enhanced precision and to prevent splashing, especially with foamy or highly viscous liquids.

De tre stages are: Start Speed (High), Middle Speed, and End Speed (Low). You can adjust the duration and intensity of each stage via the control panel settings to optimize for different liquid viscosities and container types. This ensures a fast initial fill and a slow, precise finish to prevent overfilling and dripping.

6. Vedligeholdelse

Regular cleaning and maintenance will extend the life of your filling machine.

• Daglig rengøring: After each use, especially when changing liquids, flush the inlet and outlet tubes and the nozzle with warm water until clean. For stubborn residues, a mild, food-grade cleaning solution can be used, followed by thorough rinsing.
• Udvendig rengøring: Tør maskinens ydre af med adamp klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke hovedenheden i vand.
• Pumpeinspektion: Periodically inspect the gear pump for any signs of wear or blockage. Ensure the gears rotate freely.
• Udskiftning af rør: Replace the silicone tubes if they show signs of wear, cracking, or discoloration to maintain hygiene and performance.
• Opbevaring: Opbevar maskinen et rent og tørt sted, når den ikke er i brug.

7. Fejlfinding

Se dette afsnit for almindelige problemer og deres løsninger.

8. Specifikationer

Technical details for the Moonshan MS-HFM-5K Viscous Liquid Filling Machine:

• Model: MS-HFM-5K
• Produktdimensioner: 6 x 8 x 4 tommer (hovedenhed)
• Varens vægt: 9.38 pund
• Filling Modes: Weight-based, Time-based
• Filling Accuracy: Up to 1 gram (Weight Mode)
• Pumpe Type: Stainless Steel Gear Pump
• Dysetype: Anti-dryp
• Nozzle Height Adjustment: 0-13 inches (Slide Rail Design)
• Egnede væsker: Viscous liquids (e.g., honey, oil, gel, sauces, shampoo, laundry detergent)
• Unsuitable Liquids: Thin liquids, liquids with solid particles (seeds), corrosive chemicals, paste-like toothpaste.

9. Garanti og support

Moonshan provides a standard warranty for this product against defects in materials and workmanship under normal use. The specific terms and duration of your warranty may vary based on your region and purchase date. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty service, please contact Moonshan customer service through the retailer where you purchased the product or visit the official Moonshan website for contact information. When contacting support, please have your model number (MS-HFM-5K) and purchase details ready.

For mere information kan du besøge Moonshan Store on Amazon.