ZWP URC-15s Replacement Remote Control User Manual

Indledning

This manual provides detailed instructions for the ZWP URC-15s Replacement Remote Control. It is designed to be compatible with Bose CineMate 520, 220, 130, and 120 SoundTouch home theater systems. Please read this manual thoroughly before using your new remote control to ensure proper operation and to maximize its functionality.

Pakkens indhold

• 1 x ZWP URC-15s Replacement Remote Control
• (Batterier er ikke inkluderet)

Opsætning

1. Batteriinstallation

The ZWP URC-15s remote control requires two AAA batteries for operation. Batteries are not included in the package.

1. Find batterirummets dæksel på bagsiden af ​​fjernbetjeningen.
2. Skub dækslet nedad, eller tryk på låsen (hvis den er monteret) for at åbne rummet.
3. Isæt to AAA-batterier, og sørg for, at de positive (+) og negative (-) poler er justeret korrekt med markeringerne inde i batterirummet.
4. Sæt batteridækslet på igen ved at skubbe det på plads, indtil det klikker sikkert.

Figure 1: Battery installation for the ZWP URC-15s remote control. Insert two AAA batteries into the compartment, observing polarity.

2. Første brug og kompatibilitet

This replacement remote control is designed to work directly with compatible Bose CineMate SoundTouch systems without complex pairing in most cases. For some functions or specific setups, programming may be required.

Betjeningsvejledning

Standardknapfunktioner

The remote control features standard buttons for audio device control:

• MAGT: Tænder eller slukker for enheden.
• Device Key (Source): Switches the signal input source.
• VOL+ / VOL-: Justerer lydstyrken op eller ned.
• BAS: Justerer basniveauer.
• TAIK (Dialog Key): Enhances dialog clarity.
• AFSLUT: Exits current menu or function. If the current device has a code, it sends the device's code followed by the audio device's code.

Figur 2: Overview of the ZWP URC-15s remote control buttons.

Brand Search Mode (Code Programming)

If the remote does not fully control your device, you may need to program it using the brand search mode:

1. Tryk og hold den ønskede Enhedsnøgle (e.g., TV, CBL-SAT, BD-DVD, GAME, AUX) for approximately 3 seconds. Release the key when its indicator light remains steadily on.
2. Enter the 4-digit brand code for your device. The indicator light will flash once after each digit is entered.
3. To test different codes for the current brand, press VOL+ or VOL-. This will cycle through available code groups.
4. Once the device responds correctly, press the EXIT button to save the code. The indicator light will blink three times to confirm saving.
5. If no operation is performed for 30 seconds during steps 1 and 2, all indicator lights will blink three times, and the remote will exit the search mode without saving.

Note: When programming non-Bose audio devices, pressing a non-Bose audio key will send the current key code of the current code group.

One-Click Shutdown Function

To activate a one-click shutdown sequence for multiple devices:

1. Press and hold the "CBL-SAT" and "TV" buttons simultaneously for 10 seconds.
2. The TV/CBL-SAT indicator lights will blink three times.
3. After this setting, the remote will send three frames of the TV electrical source code, three frames of the CBL-SAT electrical source code, and the BOSE audio electrical source code for a synchronized shutdown.

Opretholdelse

Udskiftning af batteri

Replace batteries when the remote's response becomes sluggish or the indicator lights dim. Always replace both AAA batteries at the same time with new ones. Do not mix old and new batteries or different types of batteries.

Rensning

Brug en blød, tør klud til at rengøre fjernbetjeningen. Brug ikke flydende rengøringsmidler, spray eller slibende materialer, da disse kan beskadige fjernbetjeningens overflade eller interne komponenter.

Fejlfinding

• Fjernbetjeningen svarer ikke:
  • Kontroller, om batterierne er isat korrekt med den rigtige polaritet.
  • Udskift gamle batterier med nye AAA-batterier.
  • Sørg for, at der ikke er nogen forhindringer mellem fjernbetjeningen og enhedens infrarøde modtager.
  • Bekræft, at fjernbetjeningen er rettet direkte mod enheden.
• Specifikke funktioner virker ikke:
  • If a specific device key (e.g., TV, AUX) is not controlling the intended device, try using the Brand Search Mode to program the correct code.
  • Ensure the correct input source is selected on your Bose system.
• Programmeringsvanskeligheder:
  • Ensure you are holding the device key for the full 3 seconds until the indicator light is steady.
  • Double-check the 4-digit brand code. If unsure, try cycling through codes using VOL+/-.
  • Make sure to press EXIT to save the code before the 30-second timeout.

Specifikationer

Figure 3: Physical dimensions of the ZWP URC-15s remote control.

Garantioplysninger

This ZWP URC-15s Replacement Remote Control comes with a 1 års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl ved normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller batterilækage.

Gem venligst dit købsbevis for garantikrav.

Støtte

For any questions, technical assistance, or warranty claims, please contact ZWP customer support. Refer to your purchase documentation for specific contact details or visit the ZWP store page on Amazon:

Visit the ZWP Store on Amazon

When contacting support, please have your product model (URC-15s) and proof of purchase readily available.