Enbrighten 12 inch Hardwired Under Cabinet Light (Model 38977-T1) Instruction Manual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Enbrighten 12 inch Hardwired Under Cabinet Light, Model 38977-T1. Please read these instructions thoroughly before installation and retain them for future reference. This fixture is designed to provide soft warm white LED lighting for under cabinet applications, featuring dimmable functionality and direct wire installation.

Vigtige sikkerhedsinstruktioner

ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.

• Læs alle instruktioner før installation.
• Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
• Use only copper supply conductors.
• Sørg for, at alle elektriske forbindelser er sikre og overholder lokale forskrifter og bestemmelser.
• Do not install this fixture near any heat source or in areas with excessive moisture.
• Dette armatur er kun til indendørs brug.
• Forsøg ikke at ændre armaturet. Enhver ændring kan ugyldiggøre garantien og skabe en sikkerhedsrisiko.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Enbrighten 12 inch Under Cabinet Light Fixture (Model 38977-T1)
• Monteringsudstyr (skruer, trådmøtrikker)

Installationsvejledning

This fixture is designed for direct wire installation. If you are not familiar with electrical wiring, it is recommended to consult a qualified electrician.

Nødvendige værktøjer (ikke inkluderet):

• Skruetrækker (Phillips og/eller flad)
• Trådstrippere
• Boremaskine (hvis monteret på en ny overflade)
• Blyant
• Målebånd

Trin-for-trin installation:

1. Sluk for strømmen: Find afbryderen eller sikringsboksen, og sluk for strømmen til det område, hvor du skal installere lysarmaturet. Kontroller, at strømmen er slukket, ved hjælp af en lydstyrkemåler.tage tester.
2. Bestem monteringssted: Choose a suitable location under your cabinet. Ensure there is adequate space for the fixture (Product Dimensions: 1.55"L x 3.3"W x 14.3"H).
3. Prepare Fixture for Wiring:

   Image: Dimensions of the Enbrighten 12-inch under cabinet light fixture, highlighting its 12-inch length, 3-inch width, 1.13-inch height, and the location of wire knockouts for electrical connections.

   Remove the cover plate from the wiring compartment on the fixture. Knock out the appropriate wire knockout for your electrical supply line.

4. Monter armaturet:

   Using the provided mounting hardware, secure the fixture to the underside of the cabinet. Ensure it is firmly attached.
5. Ledningsforbindelser:
   • Tilslut sort ledningen fra armaturet til sort (hot) wire from your electrical supply using a wire nut.
   • Tilslut hvid ledningen fra armaturet til hvid (neutral) wire from your electrical supply using a wire nut.
   • Tilslut grøn eller bar kobberledning (jordledning) fra armaturet til grøn or bare copper (ground) wire from your electrical supply using a wire nut.

   Ensure all connections are tight and secure. Tuck wires neatly into the wiring compartment and replace the cover plate.

6. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen eller sikringsskabet.

Dæmpbar kompatibilitet:

Billede: Eksamples of compatible in-wall dimmer switches, including GE Z-Wave Plus In-Wall Smart Dimmer (12724), GE Z-Wave Plus Plug-in Smart Switch (14282), and Jasco Zigbee In-Wall Smart Dimmer (45857).

This fixture is compatible with most in-wall dimmer switches, allowing you to customize your lighting levels from 10% to 100%. Refer to the dimmer switch manufacturer's instructions for installation and operation.

Betjeningsvejledning

Image: Close-up of the ON/OFF switch located on the side of the Enbrighten 12-inch under cabinet light fixture.

• Tænd/sluk: Use the integrated ON/OFF switch located on the fixture to turn the light on or off.
• Dæmpning: If connected to a compatible in-wall dimmer switch, adjust the dimmer to achieve your desired brightness level. The fixture supports dimming from 10% to 100%.
• Lysoutput: The fixture provides 485 lumens of soft warm white light at 3000K color temperature.

Image: Infographic highlighting key features: 485 Lumens brightness, 10-100% dimmability, direct wire installation, compatibility with in-wall dimmers, Energy Star certification, and UL certification.

Opretholdelse

• Rensning: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• lysdioder: The integrated LED lights are designed for long-lasting performance and do not require replacement.
• Inspektion: Undersøg regelmæssigt armaturet for tegn på skader eller løse forbindelser. Hvis der findes problemer, skal strømmen afbrydes og en kvalificeret elektriker kontaktes.

Fejlfinding

Specifikationer

Garantioplysninger

Dette Enbrighten-produkt er understøttet af en Begrænset livstidsgaranti. For specific details regarding warranty coverage and claims, please refer to the warranty documentation included with your purchase or contact Enbrighten customer support.

Kundesupport

If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact Enbrighten customer support. Contact information can typically be found on the product packaging or the official Enbrighten webwebsted.