Brugermanual til BirdDog X5 Ultra PTZ-kamera

1. Introduktion

This manual provides detailed instructions for the setup, operation, and maintenance of your BirdDog X5 Ultra PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

1.1 Pakkens indhold

• BirdDog X5 Ultra PTZ Camera with 20x Optical Zoom
• IR fjernbetjening
• 12 VDC strømforsyning
• USB-C Cable (5.9')

2. Produktet er slutview

2.1 Nøglefunktioner

• Capture up to UHD 4K60 Resolution Video with 20x Optical Zoom and AI Auto Tracking/Framing.
• Built-In NDI|HX3 Support.
• 12G-SDI, HDMI 2.0 & USB/UVC Outputs.
• Two Integrated 2.93" E-Ink Displays.
• Built-In Halo Tally.
• PoE+ Support.
• Color Matrix for high quality in low-light conditions.
• Gigabit Ethernet connectivity.

2.2 Kamerakomponenter

Familiarize yourself with the various parts of the BirdDog X5 Ultra PTZ Camera.

Figur 1: Forside view of the BirdDog X5 Ultra PTZ Camera. The camera features a prominent lens and an illuminated green tally light indicating its operational status.

Figur 2: Side view of the camera, highlighting the E-Ink display which shows network information and a QR code for easy access to camera settings or support.

Figur 3: Bagside view of the camera, detailing the various connectivity ports including LAN/PoE+, RS232/422, Audio In, HDMI-2, USB-C, HDMI-1 (MAIN), 12G-SDI, and DC 12V power input.

3. Opsætning

3.1 Tænd/sluk kameraet

1. Connect the provided 12 VDC Power Supply to the "DC 12V" port on the rear of the camera.
2. Alternatively, connect a PoE+ enabled Ethernet cable to the "LAN/PoE+" port for power and network connectivity.

3.2 Video- og lydforbindelser

1. For video output, connect a 12G-SDI cable to the "12G-SDI" port or an HDMI 2.0 cable to the "HDMI-1 (MAIN)" or "HDMI-2" ports.
2. For USB video, connect the USB-C cable to the "USB-C" port and to your computer.
3. For external audio input, connect an audio source to the "AUDIO IN" port.

3.3 Netværksforbindelse

Connect an Ethernet cable from your network switch or router to the "LAN/PoE+" port on the camera. This enables NDI|HX3 streaming and IP control.

4. Betjeningsvejledning

4.1 Grundlæggende kamerastyring

The camera can be controlled via the included IR remote, IP control software, or a compatible hardware controller.

Using the IR Remote Controller

• Point the IR remote towards the front of the camera.
• Use the directional buttons to pan and tilt the camera.
• Use the zoom buttons to adjust the optical zoom.
• Refer to the remote's specific instructions for advanced functions.

4.2 NDI|HX3 Streaming

The BirdDog X5 Ultra supports NDI|HX3 for low-latency, high-quality video transmission over IP.

1. Ensure the camera is connected to your network.
2. On your NDI-enabled receiving device or software, the BirdDog X5 Ultra should appear as an available NDI source.
3. Select the camera as your NDI source to begin streaming.

4.3 AI Auto Tracking/Framing

The camera features AI-powered auto tracking and framing to keep subjects in view.

Consult the BirdDog X5 Ultra software interface or advanced settings for configuration and activation of AI features.

5. Vedligeholdelse

5.1 Rengøring

• Gently wipe the camera body with a soft, dry cloth.
• Brug en specialklud og -opløsning til linserengøring. Undgå slibende materialer.
• Sørg for, at alle porte er fri for støv og snavs.

5.2 firmwareopdateringer

Tjek regelmæssigt den officielle Fuglehund webwebsted for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance and access to new features.

6. Fejlfinding

6.1 Ingen strøm

• Verify the 12 VDC power supply is securely connected and plugged into a working outlet.
• If using PoE+, ensure your Ethernet switch supports PoE+ and the cable is properly connected.

6.2 Ingen videoudgang

• Check all video cables (SDI, HDMI, USB-C) for secure connections.
• Ensure the receiving device (monitor, capture card) is correctly configured to the input source.
• For NDI, confirm network connectivity and that the NDI source is selected in your software.

6.3 Camera Not Responding to Control

• For IR remote, ensure line of sight and check battery.
• For IP control, verify network connection and IP address settings.

7. Specifikationer

8. Garanti og support

For garantioplysninger og teknisk support, besøg venligst den officielle Fuglehund webwebsted eller kontakt deres kundeservice.

Product registration may be required for warranty claims.