TFA Dostmann 60.2044.02

TFA Dostmann Mini Digital Alarm Clock with Temperature (Model 60.2044.02) User Manual

Model: 60.2044.02

1. Introduktion

This manual provides instructions for the setup, operation, and maintenance of your TFA Dostmann Mini Digital Alarm Clock with Temperature. Please read this manual thoroughly before using the device to ensure proper function and longevity.

2. Sikkerhedsoplysninger

  • Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
  • Undgå at tabe enheden eller udsætte den for kraftige stød.
  • Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt kvalificeret personale for service.
  • Opbevar batterier utilgængeligt for børn. Søg omgående læge ved indtagelse.
  • Bortskaf brugte batterier i henhold til lokale regler.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • TFA Dostmann Mini Digital Alarm Clock (Model 60.2044.02)
  • Instruktionsmanual (dette dokument)

Note: 2 x 1.5V AAA-batterier er nødvendige og er ikke inkluderet i pakken.

4. Produktet er slutview

The TFA Dostmann Mini Digital Alarm Clock is a compact, battery-operated device designed to display time, date, alarm settings, and indoor temperature. Its small size makes it suitable for bedside tables or travel.

Front view of the TFA Dostmann Mini Digital Alarm Clock showing time, alarm, and temperature.

Figur 1: Front view of the alarm clock. The digital display shows the current time (e.g., 13:54), alarm time (e.g., 7:00), and indoor temperature (e.g., 22.6 °C).

Tilbage view of the TFA Dostmann Mini Digital Alarm Clock showing control buttons.

Figur 2: Tilbage view of the alarm clock. This image highlights the control buttons: 'M' (Mode), '^' (Up/Adjust), and 'v' (Down/Adjust).

5. Opsætning

5.1 Batteriinstallation

  1. Find batteridækslet på bagsiden af ​​vækkeuret.
  2. Skub eller lirk forsigtigt dækslet op.
  3. Isæt to (2) 1.5V AAA-batterier, og sørg for korrekt polaritet (+/-).
  4. Sæt batterirummets dæksel på igen.

The clock will power on and display default settings or the current time if previously set.

5.2 Initial Settings (Time and Date)

  1. Press and hold the 'M' (Mode) button for approximately 3 seconds to enter time setting mode. The hour digits will flash.
  2. Brug '^' (Up) or 'v' (Down) buttons to adjust the hour.
  3. Press 'M' again to confirm the hour and move to minute setting. The minute digits will flash.
  4. Brug '^' eller 'v' buttons to adjust the minutes.
  5. Continue pressing 'M' to cycle through and set the year, month, and day using the '^' eller 'v' buttons for each value.
  6. After setting the day, press 'M' one last time to exit setting mode.

6. Betjeningsvejledning

6.1 Indstilling af alarmen

  1. From the normal time display, press the 'M' button once to switch to alarm time display mode. The alarm time will be shown.
  2. Press and hold the 'M' button for approximately 3 seconds. The alarm hour digits will flash.
  3. Brug '^' eller 'v' buttons to adjust the alarm hour.
  4. Press 'M' again to confirm the alarm hour and move to alarm minute setting. The alarm minute digits will flash.
  5. Brug '^' eller 'v' buttons to adjust the alarm minutes.
  6. Press 'M' one last time to exit alarm setting mode.

6.2 Aktivering/deaktivering af alarmen

In normal time display mode, press the '^' button once to toggle the alarm ON or OFF. An alarm icon (e.g., a bell) will appear on the display when the alarm is active.

6.3 Snooze -funktion

When the alarm sounds, press any button (except the alarm OFF button, if present) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes, refer to specific model behavior if different).

6.4 Display Modes (Time, Date, Temperature)

The clock automatically displays the current time and indoor temperature. You can switch between displaying the date and the alarm time in the secondary display area by pressing the 'v' button in normal time display mode.

The integrated thermometer measures indoor temperature within a range of -10 °C to +50 °C.

7. Vedligeholdelse

7.1 Rengøring

Tør enheden af ​​med en blød, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige displayet ellerasing.

7.2 Udskiftning af batteri

When the display becomes dim or the clock functions erratically, it is time to replace the batteries. Follow the battery installation steps in Section 5.1. Always replace both batteries at the same time with new 1.5V AAA batteries.

8. Fejlfinding

ProblemMulig årsagLøsning
Skærmen er tom eller svag.Batterierne er brugt op eller forkert installeret.Udskift batterierne med nye 1.5V AAA-batterier, og sørg for korrekt polaritet.
Alarmen lyder ikke.Alarmen er ikke aktiveret, eller alarmtidspunktet er forkert.Ensure the alarm is activated (check for alarm icon). Verify the alarm time is set correctly.
Forkert tidspunkt/dato.Tid/dato var ikke indstillet korrekt, eller batterierne blev fjernet.Nulstil tid og dato ved at følge instruktionerne i afsnit 5.2.
Temperaturaflæsningen virker unøjagtig.Device is placed near a heat source, cold draft, or in direct sunlight.Relocate the clock to a stable indoor environment away from direct temperature influences.

9. Specifikationer

Mærke:TFA Dostmann
Modelnummer:60.2044.02
Skærmtype:Digital
Bevægelsestype:Kvarts
Særlige funktioner:Alarm, Calendar Display, Temperature Display
Strømkilde:Battery Powered (2 x 1.5V AAA, not included)
Materiale:Plast
Dimensioner (L x B x H):72 x 25 x 56 mm
Vægt:51 gram
Indendørs temperaturområde:-10 °C til +50 °C
Farve:Hvid

10. Garanti og support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official TFA Dostmann webwebsted. Gem din købsbevis i tilfælde af garantikrav.

Manufacturer: TFA Dostmann GmbH, Wertheim am Main, Germany.

© 2026 TFA Dostmann. Alle rettigheder forbeholdes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.