1. Introduktion
Thank you for choosing the Generic Kitchen Extractor Hood. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new appliance. Please read this manual thoroughly before use and retain it for future reference.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af apparatet.
- Sørg for, at strømforsyningen voltage matcher klassificeringsmærkatet på emhætten.
- Do not operate the hood with wet hands.
- Rengør regelmæssigt fedtfiltrene for at undgå brandfare.
- Der må ikke flamberes under emhætten.
- Sørg for tilstrækkelig ventilation i rummet, når emhætten bruges samtidig med gas- eller andre brændstofdrevne apparater.
- Afbryd apparatet fra strømforsyningen før rengøring eller vedligeholdelse.
- Installationen skal udføres af en kvalificeret tekniker i overensstemmelse med lokale regler.
3. Produktet er slutview
3.1 Nøglefunktioner
- Hidden Convenient Switch: Pull-out design for fast and slow adjustment, maintaining aesthetic appeal.
- Simple and Intuitive Controls: Clear keyboard style buttons with a long service life.
- LED belysning: Two 1.5W LED lights illuminate the cooking area for clear visibility.
- 3-Layer Metal Filter: Effectively removes grease and cooking odors, easily detachable for cleaning.
- Modern and Space-saving Design: Integrated, flush-fitting design for a neat kitchen appearance.
- Kraftig sugning: 14M3 / min airflow to effectively remove odors, steam, and grease while keeping noise low.
3.2 Komponenter
The product typically includes the main extractor hood unit, 3-layer metal filters, and integrated LED lights.
Figur 1: Nederst view of the Kitchen Extractor Hood, showcasing the pull-out section with metal filters and integrated LED lights.
4. Opsætning og installation
This extractor hood is designed for built-in installation within kitchen cabinetry. Professional installation is recommended.
4.1 Dimensioner og placering
Ensure your cabinet space accommodates the hood's dimensions for proper integration.
- Smoke machine size: 600mm (length) × 280mm (side width) × 40mm (height)
- Hoarding size: 510mm (length) × 285mm (side width) × 220mm (height)
Figur 2: Produktmål til installationsplanlægning.
Figur 3: Eksample of the built-in three-dimensional design integrated into kitchen cabinetry.
4.2 Elektrisk tilslutning
The hood requires a 220V~50Hz power supply. The power cord is 1.5m long. Ensure the electrical connection is made by a qualified electrician.
4.3 Ventilation Options
This model supports an inner loop (recirculating) operation, which means it does not require an external smoke pipe. It absorbs oil fume through the oil screen filter and activated carbon, then discharges purified air back into the kitchen.
Figure 4: Internal circulation mechanism with oil filter and activated carbon.
Figure 5: Inner loop operation, suitable for simple steaming and cooking, frying steak, bread, etc. Not recommended for heavy stir-frying.
5. Betjeningsvejledning
5.1 Tænd/sluk og hastighedskontrol
To operate the hood, gently pull out the hidden front panel. This action will typically activate the fan and lights. The control buttons for fan speed (fast/slow) are located on the panel. Press the desired speed button to adjust the suction power.
Figure 6: Pull-out operation and air intake.
5.2 LED lys
The hood is equipped with two 1.5W LED lights. A dedicated button on the control panel allows you to turn the lights on or off independently of the fan operation.
6. Vedligeholdelse og rengøring
Regular cleaning ensures optimal performance and extends the lifespan of your extractor hood.
6.1 Cleaning the Metal Filters
The 3-layer metal filters should be cleaned regularly, depending on usage. They can be easily detached for cleaning.
- Ensure the hood is turned off and disconnected from the power supply.
- Locate the release latches on the filters and gently pull them down to remove.
- Clean the filters using warm soapy water or a dishwasher. For stubborn grease, a degreasing-middel kan anvendes.
- Skyl grundigt og lad det tørre helt, før det monteres igen.
Figure 7: Cleaning the metal filter.
6.2 Cleaning the Hood Surface
Tør overfladerne i rustfrit stål af med en blød kludampened with mild detergent. Avoid abrasive cleaners or scouring pads, as they can scratch the finish.
7. Fejlfinding
If you encounter issues with your extractor hood, refer to the following common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Emhætten fungerer ikke | Ingen strømforsyning Netledningen frakoblet | Kontroller stikkontakt og afbryder Sørg for, at netledningen er korrekt tilsluttet |
| Svag sugeevne | Grease filters are clogged Obstruction in air intake/outlet | Clean the metal filters Check for any blockages |
| Overdreven støj | Løse komponenter Problem med ventilatormotor | Check if filters are properly installed Kontakt kvalificeret servicepersonale |
| LED-lys virker ikke | Pære defekt Problem med elektrisk forbindelse | Replace LED bulb (if replaceable) Kontakt kvalificeret servicepersonale |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kvalificeret servicepersonale.
8. Specifikationer
| Specifikation | Detalje |
|---|---|
| Produktnavn | Rustfrit stål rækkehætte |
| Modelnummer | Ah95ZkONuhGRIkqM |
| Produkt materiale | Rustfrit stål |
| Smoke Machine Size (L×W×H) | 600 mm × 280 mm × 40 mm |
| Hoarding Size (L×W×H) | 510 mm × 285 mm × 220 mm |
| Strømkabellængde | 1.5m |
| Strømforsyning | 220V~50Hz |
| Indgangseffekt | 200W |
| Product Wind Pressure | 280 Pa |
| Luftvolumen | 14M3 / min |
| LED lys | 1.5 W × 2 |
| Filtertype | Mesh (3-layer metal) |
| Monteringstype | Built-In Mount |
| Speciel funktion | Nem at rengøre |
| Oprindelsesland | Kina |
9. Garanti og support
Specific warranty details for this product are not provided in this manual. For warranty claims, technical support, or service inquiries, please contact the retailer or manufacturer directly using the contact information provided at the time of purchase.