BONTEC Full Motion TV Monitor Wall Mounts User Manual

Indledning

Thank you for choosing BONTEC Full Motion TV Monitor Wall Mounts. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new wall mounts. Please read this manual thoroughly before installation and keep it for future reference. This product bundle includes two distinct models: the CT129 mount for smaller TVs (13-42 inches) and the CT139M mount for larger TVs (32-75 inches).

Sikkerhedsoplysninger

WARNING: Failure to read and follow all instructions may result in personal injury or property damage.

• Sørg for, at monteringsfladen sikkert kan bære den samlede vægt af beslaget og skærmen.
• MONTER IKKE KUN PÅ GIPSVÆGG. This mount is designed for installation on solid concrete walls, brick walls, or wood studs.
• Brug altid en stolpesøger til at finde træstolper præcist.
• Do not exceed the maximum weight capacity specified for each mount: 55 lbs (25 kg) for CT129 and 132 lbs (60 kg) for CT139M.
• Ensure all screws are securely tightened before use. Do not overtighten.
• Hold børn og kæledyr væk under installationen.
• If you have any doubts about the installation, consult a qualified professional.

Pakkens indhold

Please verify that all components are present and undamaged before beginning installation. Refer to the parts list provided in your product packaging for specific quantities of each item.

Billede: Overview of the BONTEC CT129 and CT139M wall mounts, along with two HDMI cables typically included in the package.

Opsætning og installation

Kontrol før installation

• Tjek TV'ets VESA-mønster: Mål den vandrette og lodrette afstand mellem monteringshullerne på bagsiden af ​​dit tv. Dette er dit VESA-mønster.
• Tjek tv'ets vægt: Ensure your TV's weight does not exceed the maximum capacity of the chosen mount.
• Identificer vægtype: Determine if your wall is concrete, brick, or wood stud. This will dictate the appropriate hardware and drilling method.

Image: Illustration of compatible wall types for secure installation: concrete, wood stud, and brick. A critical warning indicates that the mount should not be installed on drywall alone.

Step-by-Step Installation (General Guide)

1. Fastgør TV-beslag til TV'et: Secure the vertical mounting brackets to the back of your TV using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and level.
2. Markér borehuller: Hold the wall plate against the wall at your desired mounting height. Use a pencil to mark the drilling locations. For wood studs, ensure marks are centered on the stud. For concrete/brick, use a level to ensure accuracy.
3. Bor pilothuller: Drill pilot holes at the marked locations using the recommended drill bit size for your wall type.
4. Monter vægplade: Fastgør vægpladen til væggen med de medfølgende trækbolte og skiver. Spænd den godt fast, men overspænd den ikke.
5. Hæng TV på vægpladen: Løft forsigtigt TV'et op med de medfølgende beslag, og hægt dem fast på vægpladen. Sørg for, at TV'et sidder sikkert fast.
6. Sikker montering af TV: Use the safety screws or locking mechanisms on the brackets to secure the TV to the wall plate, preventing accidental dislodgement.

VESA-kompatibilitet

The CT129 mount supports VESA patterns including 75x75mm, 100x100mm, 100x200mm, and 200x200mm.

Image: Visual representation of the different VESA mounting patterns compatible with the CT129 mount, including dimensions for each configuration.

The CT139M mount supports a wider range of VESA patterns, including 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, and 600x400mm.

Image: This diagram illustrates the range of compatible TV screen sizes (32" to 75") and the corresponding VESA mounting patterns supported by the CT139M mount, including a note about potential protrusion for smaller TVs.

Betjening og justeringer

CT129 Mount Adjustments (13-42 inch)

• Vip: Adjust the screen tilt by +/- 10° to reduce glare and optimize viewing.
• Drejelig: Swivel the TV +/- 90° left or right for flexible viewing vinkler.
• Rotation: Rotate the screen 360° for portrait or landscape orientation.
• Udvidelse/tilbagetrækning: The mount extends up to 15.7 inches (40 cm) from the wall and retracts to a slim 2.7 inches (6.8 cm) to save space.

Image: This illustration demonstrates the extension and retraction range of the CT129 mount, showing it can extend up to 15.7 inches and retract to 2.7 inches from the wall.

CT139M Mount Adjustments (32-75 inch)

• Vip: Adjust the screen tilt by +/- 8° for optimal viewing.
• Drejelig: Swivel the TV up to 180° left or right, providing a wide range of viewing stillinger.
• Niveaujustering: Fine-tune the TV level by +/- 3° after installation.
• Long Reach Extension: The articulated arm extends from 2.6 inches (6.6 cm) to an impressive 40.9 inches (104 cm) from the wall, offering maximum flexibility and space-saving when retracted.

Image: This diagram highlights the extensive extension range of the CT139M mount, showing it can extend from 2.6 inches to 40.9 inches, and indicates its robust 132 lbs (60 kg) weight capacity.

Image: This illustration demonstrates the 180-degree swivel range of the CT139M mount, enabling users to adjust the TV for optimal viewing from various positions in a room.

Opretholdelse

• Rensning: Brug en blød, tør klud til at rengøre beslaget. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige finishen.
• Periodiske kontroller: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre. Hvis der opdages nogen løshed, skal de straks strammes igen.
• Smøring: The articulating joints are designed for smooth movement. If any stiffness occurs over time, a small amount of silicone-based lubricant can be applied to the moving parts.

Fejlfinding

• TV'et er ikke i vater: If the TV appears unlevel after installation, check the level adjustment feature on your mount (CT139M has +/- 3° level adjustment). For CT129, ensure the wall plate and TV brackets were installed perfectly level.
• Vanskeligheder med at justere bevægelse: Ensure no cables are snagged or obstructing movement. Check that all pivot points are free from debris. If the mount feels too stiff or too loose, check the tension screws on the articulating arms and adjust as needed.
• Mount føles ustabil: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket connections. Ensure the wall anchors are properly installed and the wall type is suitable for the mount. Do not re-mount the TV until stability is confirmed.

Produktspecifikationer

Garanti og support

BONTEC products are manufactured with quality and durability in mind. For any questions, technical assistance, or to report missing/damaged parts, please contact BONTEC customer support. Please have your product model number (CT129 or CT139M) and purchase information ready when contacting support.

For the most up-to-date warranty information and support contact details, please refer to the official BONTEC webwebstedet eller de kontaktoplysninger, der følger med din produktemballage.