Pro-Ject Debut EVO 2 Audiophile Pladespiller

1.1 Udpakning og komponenter

Carefully unpack all items from the box. Ensure all components are present before proceeding with assembly.

• Pladespiller enhed
• Transparent Dustcover
• Tilslutningskabel
• Universal strømadapter
• Justeringsvinkelmåler
• Enkelt adapter

Front view of the Pro-Ject Debut EVO 2 turntable.

1.2 Montering af plade og bånd

1. Carefully place the heavy aluminum platter onto the spindle in the center of the turntable.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and around the motor pulley.
3. Rotate the platter manually a few times clockwise to ensure the belt is properly seated.

Image showing the platter with the drive belt correctly installed around the motor pulley.

1.3 Tonearm Assembly

1. Skub modvægten på bagsiden af ​​tonearmen.
2. Attach the pre-mounted Pick it MM EVO cartridge to the tonearm headshell.

Detaljeret view of the carbon fiber tonearm and the pre-mounted Pick it MM EVO cartridge.

Diagram illustrating the TPE counterweight and premium bearing block for the tonearm.

1.4 Dustcover Installation

Carefully insert the hinges of the transparent dustcover into the corresponding slots on the turntable base.

The Pro-Ject Debut EVO 2 turntable with its transparent dustcover in place.

1.5 Leveling the Turntable

Place the turntable on a stable, level surface. Use a bubble level (not included) to ensure the turntable is perfectly horizontal. Adjust the turntable's feet as necessary to achieve a level position.

1.6 Balancing the Tonearm

This critical step ensures proper tracking force and prevents damage to your records and stylus. Follow the detailed instructions in the included manual for precise tonearm balancing and anti-skating adjustment.

Detail of the tonearm showing the anti-skating mechanism.

1.7 Tilslutning til et lydsystem

Tilslut pladespilleren til din amplifier or receiver using the provided connection cable. Ensure your amplifier has a phono input, or use an external phono preamplifier if necessary. Connect the ground wire to the ground terminal on your amplivligere/præamp to minimize hum.

Video: Fluance Reference Turntable First Time Setup. This video provides a general guide for turntable setup, including platter, belt, tonearm, and dust cover installation, as well as leveling and balancing.

Video: How to Connect a Fluance Turntable to a Stereo Amplifier. This video offers a general guide on connecting a turntable to an amplifier, which can be helpful for the Pro-Ject Debut EVO 2.

2.1 Tænd/sluk og hastighedsvalg

To power on the turntable, rotate the power knob. The Debut EVO 2 features electronic speed selection for 33 and 45 RPM. Use the dedicated button to switch between these speeds. For 78 RPM records, a special stylus and pulley may be required (sold separately).

2.2 Afspilning af en plade

1. Placer din post på tallerkenen.
2. Vælg den korrekte afspilningshastighed (33 eller 45 omdr./min.).
3. Løft forsigtigt tonearmen ved hjælp af cue-håndtaget.
4. Placer tonearmen over det ønskede spor på pladen.
5. Slowly lower the cueing lever to allow the stylus to descend onto the record groove.
6. At the end of the record, lift the tonearm using the cueing lever and return it to its rest.

3.1 Rengøring

• Regularly clean the dustcover and turntable plinth with a soft, dry cloth.
• Use a carbon fiber brush to gently clean your records before each play to remove dust and static.
• Clean the stylus carefully with a dedicated stylus brush, moving from back to front.

3.2 Pleje af pennen

The stylus is a delicate component. Avoid touching it with your fingers. Replace the stylus when signs of wear appear, typically after 500-1000 hours of playback, to maintain sound quality and prevent record damage.

4.1 Ingen lyd

• Check all cable connections between the turntable, preamplifier (if used), and amplifier/modtager.
• Sørg for, at den korrekte indgang er valgt på din amplifier/modtager.
• Verify the stylus is properly seated in the cartridge and the tonearm is balanced.

4.2 Skipping or Distortion

• Sørg for, at drejeskiven står på en stabil og plan overflade.
• Re-check tonearm balance and anti-skating settings.
• Rengør pladen og pennen.
• Inspect the stylus for damage or wear.

4.3 Humming Noise

• Sørg for, at jordledningen er sikkert forbundet mellem pladespilleren og din amplivligere/præamp.
• Check for any loose connections in the audio cables.
• Move the turntable away from other electronic devices that might cause interference.

6.1 Tilgængelighed af reservedele

Pro-Ject offers a 25-year spare parts availability guarantee for this turntable, ensuring its longevity and continued performance.

6.2 Kundesupport

For further assistance, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Pro-Ject Audio Systems webwebsted.