Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash DB330M Micro-ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage. The DB330M case features a 270° panoramic tempered glass panel, pre-installed PWM ARGB fans, and a high-speed I/O panel.
Sikkerhedsoplysninger
- Frakobl altid strømforsyningen fra stikkontakten, før du installerer eller servicerer komponenter inde i pc-kabinettet.
- Handle tempered glass panels with care to prevent breakage. Avoid impacts or sharp objects.
- Brug antistatiske handsker eller en antistatisk håndledsrem for at forhindre skader på følsomme komponenter som følge af elektrostatisk udladning (ESD).
- Hold små dele og skruer væk fra børn.
- Sørg for tilstrækkelig ventilation omkring pc-kabinettet for at forhindre overophedning.
Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- darkFlash DB330M Micro-ATX PC Case
- 3 x Pre-installed PWM ARGB Fans
- Accessory Box (screws, cable ties, etc.)
- Brugervejledning (dette dokument)
Funktioner overview
- 270° panoramisk hærdet glas: Giver en ekspansiv view af interne komponenter og RGB-belysning.
- Højhastigheds-I/O-panel: Includes USB 3.0 and Type-C ports for fast data transfer.
- Vertical Airflow Cooling: Optimized design with pre-installed fans for efficient heat dissipation.
- Magnetiske støvfiltre: Located on top and bottom to keep components clean.
- Nem installation: User-friendly design for hassle-free assembly and maintenance.
Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnavn | DB330M PC CASE |
| Dimensioner (LxBxH) | 218 mm x 333 mm x 400 mm (8.58 cm D x 13.11 cm B x 15.75 cm H) |
| Bundkort kompatibilitet | Mikro-ATX, ITX |
| Sagstype | Midi-tårnet |
| Materiale | Plastik, hærdet glas |
| Forudinstallerede ventilatorer | 3 x 120 mm PWM ARGB-blæsere |
| Max CPU kølerhøjde | 180 mm |
| Maksimal GPU-afstand | 305 mm |
| Kølerstøtte (øverst) | Op til 240 mm |
| Strømforsyningsmonteringstype | Bottom Mount (Max 140mm PSU length) |
| I/O-porte | 1 x USB 3.0, 1 x Type-C, Audio In/Out |
Opsætning og installation
1. Accessing the Interior (Quick Release Design)
The darkFlash DB330M features a quick-release design for easy access to internal components. The tempered glass panels can be removed by gently pulling them away from the chassis. The top panel also detaches for fan/radiator installation.
2. Installation af bundkort
Install your Micro-ATX or ITX motherboard into the designated area. Ensure standoffs are correctly aligned and secured. The case supports CPU coolers up to 180mm in height and GPUs up to 305mm in length.
3. Installation af ventilator og kølesystem
The case comes with three pre-installed 120mm PWM ARGB fans. Two fans are located at the top, and one at the rear. Additional fan mounts are available at the bottom (up to 2 x 120mm) for enhanced airflow. The case supports a 240mm AIO radiator on the top panel.
The pre-installed fans are PWM ARGB type, offering speed adjustment and rich lighting modes with motherboard synchronization. Note: An RGB hub controller is not included.
4. Power Supply and Storage Installation
Install your power supply unit (PSU) in the bottom mount. The case supports PSUs up to 140mm in length. Utilize the standard hard drive cage for storage devices.
5. Tilslutning af frontpanel med I/O
Connect the front I/O panel cables to your motherboard. The panel includes a Type-C port, USB 3.0 port, and USB 2.0 port for various connectivity needs.
6. Kabelforvaltning
Utilize the cable routing options and tie-downs behind the motherboard tray to ensure clean cable management. This improves airflow and aesthetics.
Betjeningsvejledning
1. Tænder
After all components are securely installed and connected, plug in the power cable to your PSU and press the power button on the front I/O panel to start your system.
2. ARGB-blæserstyring
The pre-installed ARGB fans can be controlled via compatible motherboard software (if connected to an ARGB header) to customize lighting effects and fan speeds. Refer to your motherboard manual for specific software instructions.
3. Konfiguration af luftstrøm
The DB330M is designed with optimized airflow channels. The pre-installed fans facilitate vertical airflow, with the fan above the PSU directing air towards the graphics card. Ensure no obstructions block the airflow paths.
Opretholdelse
1. Rengøring af støvfilter
Regularly clean the magnetic dust filters located on the top and bottom of the case. Gently remove the filters and clean them with compressed air or a soft brush. Reattach them securely after cleaning.
2. Generel rengøring
Use a soft, dry cloth to wipe down the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth. Avoid abrasive cleaners or solvents.
Fejlfinding
- PC'en tænder ikke:
- Ensure the power supply is properly connected to the wall and the PSU switch is in the 'ON' position.
- Verify all power cables from the PSU are securely connected to the motherboard and components.
- Kontroller forbindelsen mellem tænd/sluk-knappen og bundkortet på frontpanelet.
- Ventilatorer drejer ikke/RGB virker ikke:
- Kontroller, at blæserens strømkabler er tilsluttet bundkortet eller blæserstyringen.
- Ensure ARGB cables are connected to a compatible ARGB header on the motherboard or an ARGB controller.
- Check motherboard software settings for fan speed and RGB control.
- USB-porte fungerer ikke:
- Verify the front panel USB 3.0 and Type-C cables are correctly plugged into the corresponding headers on your motherboard.
- Sørg for, at bundkortdriverne er opdaterede.
Garanti og support
darkFlash provides a 1 års garanti for this computer case. For technical support, warranty claims, or further assistance, please contact darkFlash customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt. Gem venligst din købsbevis for at validere garantien.
Official darkFlash Webwebsted: www.darkflash.com