GOOLOO GP3000/A3 3000A Jump Starter with 150PSI Air Compressor Instruction Manual

1. Produktet er slutview

The GOOLOO GP3000/A3 is a versatile 5-in-1 device combining a powerful 3000A peak current jump starter, a 150PSI air compressor, a portable power bank, an LED flashlight, and an SOS emergency light. It is designed to provide reliable assistance for various vehicles and devices.

Figure 1: GOOLOO GP3000/A3 Jump Starter and Air Compressor unit with accessories.

2. Opsætning og opladning

2.1 Opladning af enheden

Before first use, fully charge the GP3000/A3 unit. Use the provided USB-C cable and a compatible charger (not included) to charge the device. The battery level indicator on the screen will show charging progress.

2.2 Connecting Jumper Cables

1. Open the protective cap on the jump starter port.
2. Insert the blue end of the smart jumper cable into the jump starter port on the GP3000/A3 unit. Ensure a secure connection.
3. The smart jumper cable features built-in safety protections against over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, overbelastning, gnistsikker og omvendt opladning.

2.3 Connecting Air Compressor Hose

1. Locate the air compressor hose port on the unit.
2. Screw the air compressor hose securely into the port.
3. Attach the appropriate nozzle from the accessory kit for the item you wish to inflate.

3. Betjeningsvejledning

3.1 Jumpstart af et køretøj

1. Ensure the GP3000/A3 unit is sufficiently charged.
2. Tilslut den røde clamp til den positive (+) pol på køretøjets batteri.
3. Tilslut den sorte clamp til den negative (-) pol på køretøjets batteri.
4. Check the smart jumper cable indicator light. A solid green light indicates a correct connection and the unit is ready. If the light is red or flashing, check connections for reverse polarity or other issues.
5. If the vehicle battery is completely dead or voltage is too low to detect, press the "BOOST" button on the smart jumper cable. The indicator light will turn solid green, providing maximum power for 30 seconds.
6. Start the vehicle. Once the vehicle starts, immediately remove the clamps fra batteripolerne.

Figure 2: Jump starter connected to a vehicle battery for emergency starting.

3.2 Dækpumpe

1. Connect the air compressor hose to the tire valve.
2. Turn on the GP3000/A3 unit. The screen will display the current tire pressure.
3. Use the mode button to select the appropriate inflation mode (SUV, car, bike, ball, or customizable).
4. Use the +/- buttons to set the desired pressure (PSI, BAR, or KPA).
5. Press the start button to begin inflation. The compressor will automatically shut off once the preset pressure is reached.

Figure 3: The unit inflating a vehicle tire, displaying current and target pressure.

3.3 Powerbankens funktionalitet

The GP3000/A3 features USB-A and USB-C output ports to charge smartphones, tablets, and other USB-powered devices. Simply connect your device using a compatible USB cable.

Figure 4: The jump starter unit charging various electronic devices.

3.4 LED Flashlight and SOS Light

Press and hold the power button for 3 seconds to turn on the LED flashlight. Press the power button again to cycle through different modes: solid light, strobe, and SOS signal. Press and hold again to turn off.

Figure 5: Demonstrating the normal, strobe, and SOS modes of the integrated LED flashlight.

4. Sikkerhedsoplysninger

The GP3000/A3 is equipped with 10 smart safety protections, including over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, and reverse-charge protection. Always follow these guidelines for safe operation:

• Nedsænk ikke enheden i vand.
• Skil ikke enheden ad.
• Opbevares utilgængeligt for børn.
• Brug kun de medfølgende smarte jumperkabler.
• Do not jump start a vehicle with a severely damaged or frozen battery.

Figure 6: Smart jumper cable highlighting the 10 built-in safety protections.

5. Vedligeholdelse og opbevaring

The GP3000/A3 is designed for durability with over 1000+ charge cycles. To ensure longevity and optimal performance:

• Genoplad enheden hver 3.-6. måned, selvom den ikke er i brug, for at opretholde batteriets sundhed.
• Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. The operating temperature range is -4°F to 140°F (-20°C to 60°C).
• Rengør enheden med en tør, blød klud. Brug ikke skrappe kemikalier eller slibende materialer.

6. Fejlfinding

• Enheden tænder ikke: Ensure the unit is charged. Press and hold the power button for a few seconds.
• Jumper cable indicator light is red/flashing: Check for reverse polarity (red clamp on negative, black on positive) and correct the connection. If the battery is extremely low, use the BOOST function.
• Luftkompressoren puster sig ikke op: Ensure the hose is securely attached and the desired pressure is set. Check for leaks in the hose or tire valve.
• Overophedning af enhed: The device has built-in overheat protection. If it becomes too hot, it will temporarily shut down. Allow it to cool down before resuming use.

7. Specifikationer

• Peak Cranking Ampalder: 3000 Amps
• Batteri Voltage: 12 volt
• Battericellesammensætning: Lithium polymer
• Max Engine Compatibility: Op til 9.0 l benzin, 6.5 l diesel
• Max Tire Inflator Pressure: 150 PSI
• Luftstrøm: 35 l/min
• Driftstemperatur: -4°F til 140°F (-20°C til 60°C)
• USB-udgang: USB-A (5V/3A), USB-C (5V/3A, 9V/2A, 12V/1.5A)
• Batterikapacitet: 44.4 Wh

8. Officiel produktvideo

Watch this official video from GOOLOO for a demonstration on how to jump start a car using a similar model.

Video 1: How to Jump Start a Car Using GOOLOO GT6000 (similar to GP3000/A3).

9. Garanti og support

For warranty information, technical support, or further inquiries, please refer to the official GOOLOO website or contact GOOLOO customer service directly. You can also visit the GOOLOO Store on Amazon.